The Multiquip 28400ZH8013ZB is a genuine OEM Recoil Starter Assembly NH1 Black designed for a wide range of Honda-powered Multiquip equipment across plate compactor, concrete mixer, mortar mixer, pump, power trowel, generator, welder, and masonry saw product lines. As a factory-sourced component, 28400ZH8013ZB is built to the same specification as the original part it replaces, ensuring a direct, dependable fit across every compatible model. Compatible equipment spans the MVC, MC, WC, WM, QP, CA, and GA series among others — always confirm your model code and serial number before ordering. Sourced and sold by DHS Equipment as an authorized Multiquip OEM part, this starter assembly is a straightforward service replacement for any Honda-powered unit in this broad equipment family.
Key Features
- Genuine OEM Pull-Start Integrity — Factory-sourced recoil mechanism engineered to deliver consistent cord tension and reliable rope rewind across the full engagement cycle.
- Honda Engine Application — Built specifically for Honda-powered Multiquip units; mounts directly to the engine blower housing without modification to the starter cup or pawl engagement points.
- Broad Cross-Series Fitment — Fits Honda-engined models across the MVC, MC, WC, WM, QP, CA, GA, and GAW series, making it a high-utility service stock item for multi-equipment fleets.
- Correct Rope Return Performance — A worn or binding recoil spring causes hard starting or a rope that won't retract fully; replacing with this part restores smooth, repeatable pull-start function.
- Black NH1 Housing Finish — Matches the original OEM appearance, confirming you have the correct color-coded assembly variant for Honda GX-series engines in this configuration.
A recoil starter assembly is the manual starting mechanism mounted to the engine blower housing. When the operator pulls the starter rope, the internal recoil spring stores energy and spins the engine crankshaft fast enough to initiate combustion; once the engine fires, the pawls disengage and the spring retracts the rope back into the housing. When the recoil spring breaks, the rope frays, or the pawl mechanism wears, the engine becomes difficult or impossible to start by hand. Replacing the complete assembly rather than individual internal components is the most efficient repair path and restores full starting performance in a single service step.
Have a question about fitment or need help confirming compatibility for your machine? Contact the DHS Equipment team — we're here to help you get the right part the first time.
Part Details
| Part Number | 28400ZH8013ZB |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Recoil Starter Assembly NH1 Black |
Compatibility & Fitment
| Name | Model |
|---|---|
| Vibrators | G55H |
| Portable Generators | GA-2.5H |
| Portable Generators | GAC2.2H |
| Welders | GAW135H |
| Concrete Mixers | MC-42S |
| Mixers | MC-64S |
| Mixers | MC-64P |
| Plate Compactors | MVC-70H |
| Plate Compactors | MVC-70HW |
| Plate Compactors | MVC77 |
| Plate Compactors | MVC-88GH |
| Plate Compactors | MVC-88GHW |
| Plate Compactors | MVC90H |
| Plate Compactors | MVH-120GH |
| Concrete Mixers | EC-62S |
| Concrete Mixers | EC-62P |
| Concrete Mixers | MC-62S |
| Concrete Mixers | MC-62P |
| Concrete Mixers | CMS-64S |
| Concrete Mixers | CMS6S |
| Concrete Mixers | WC-42S |
| Concrete Mixers | WC-62S |
| Concrete Mixers | WC-62P |
| ESSICK Plaster-Mortar Mixers | EM-70P |
| Portable Mixers | MS15E |
| Masonry Saws | MS18H5.5 |
| Masonry Saws | MS18H8 |
| Masonry Saws | MS18E |
| Portable Mixers | MS45E |
| Masonry Saws | MS-63 |
| Mixers | WM-70S |
| MQ Diaphragm Pumps | MQ-D206H |
| Diaphragm Pumps | MQD2H |
| Diaphragm Pumps | MQD2D3H |
| MQ Diaphragm Pumps | MQ-D305 |
| MQ Diaphragm Pumps | D306 |
| MQ Diaphragm Pumps | MQ-D306HA |
| STOW Diaphragm Pumps | SDP-2 |
| STOW Diaphragm Pumps | SDP-3 |
| STOW Centrifugal Pumps | CP-20H |
| STOW Centrifugal Pumps | CP-30H |
| MQ Centrifugal Pumps | QP-204H |
| Centrifugal Pumps | QP303H |
| MQ Trash Pumps | QP-202TH |
| Trash Pumps | QP2TH |
| STOW Trash Pumps | T-20H |
| International Walk-Behind Power Trowels | CA-4-4H |
| MQ Mixers | MC64P/S |
| Saws | SCT46 |
| Heavy Duty Series | HPHA36C5H |
| C and CA Series | CA4HC |
| Walk-Behind Trowels | J-SERIES |
| Saws | SCT36ANDSCT46 |
| STOW Diaphragm Pumps | CA90749 |
| Centrifugal Pumps | QP205SH |
| Mixers | WM70S/P |
| Saws | SCT36 |
| Concrete Mixers | EC-42S |
| MQ Mixers | MC44S |
| Concrete Mixers | CMS-44S |
| Concrete Mixers | CMS-4S |
| ESSICK Plaster-Mortar Mixers | EM-70S |
| Portable Mixers | MS15H5.5 |
| Portable Mixers | MS45H5.5 |
| Mixers | WM-70P |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Walk-Behind Trowels | EPOXY-SERIES |
| Power Trowels | CA4.4HM |
| Walk-Behind Trowels | JA-SERIES |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
