Cylinder Overhaul Kit (C) | Husqvarna K750, K760, K760II | 581 47 61-02

Cylinder Overhaul Kit (C) | Husqvarna K750, K760, K760II | 581 47 61-02

$112.00
SKU:
K750 KIT-C | GSKT | SPRK PLG | DECO VALVE | NDL CAGE | AF (K750)
Adding... The item has been added

The Cylinder Overhaul Kit (C) is a aftermarket replacement part for the Husqvarna K750, K760, and K760II models manufactured by DHS Quality Parts. This kit includes a cylinder assembly, piston, piston rings, wrist pin, and circlips. It is designed to provide a complete overhaul for the engine's cylinder, restoring optimal performance and reliability. This kit is an ideal solution for those looking to repair or maintain their Husqvarna K-series cut-off saws.

Husqvarna K750, K760, and K760II cylinder assembly by DHS Quality Parts.

SERVICE NOTE: The inlet plate option is to replace the original inlet plate found on the Husqvarna K750 and older style Husqvarna K760 cylinder. The new style replacement cylinder has wider intake ports, requiring the new style intake plate. If you have a Husqvarna K760II, you should not need the intake plate. Please use the measurements to confirm if you need the new style intake plate. The inlet plate measures 17.50mm between intake ports and 59.03mm wide overall. Both air filters are not included. Please choose the correct air filter for your application. Not compatible with greater than 10% ethanol fuel.

  • "DHS Quality Parts" brand
  • (C) designation in title refers to our internal inventory system (Kit C, Cylinder Kit) and does not reflect any service codes by Husqvarna
  • Cylinder: 581 47 61-02, 5814761-02, 581476102
  • Cylinder Base Gasket: 506 37 67-01, 5063767-01, 506376701
  • Piston, Rings, Pin and Clips: 506 37 24-02, 5063724-02, 506372402
  • Needle Cage Bearing: 503 25 56-01, 5032556-01, 503255601
  • Decompression Valve: 503 66 56-01, 5036656-01, 503665601
  • Spark Plug: WSR6
  • Air Filter: 506 36 72-02, 5063672-02, 506367202 --OR-- Air Filter: 574 36 23-01, 5743623-01, 574362301
  • Optional inlet plate 574 23 18-02, 5742318-02, 574231802 if selected above

 

The inlet plate option is to replace the original inlet plate found on the K750 and older style K760 cylinder. The new style replacement cylinder has wider intake ports, requiring the new style intake plate. If you have a K760II, you should not need the intake plate. Please use the measurements below to confirm if you need the new style intake plate.

  • For use on K760II cylinders with wider ports
  • Inlet plate measures 17.50mm between intake ports
  • Inlet plate measures 59.03mm wide overall