This Cylinder Overhaul Kit (D) is an aftermarket replacement part for your Husqvarna K750, K760, or K760II cut-off saws. Manufactured by DHS Quality Parts, this Cylinder Overhaul Kit is designed to meet the high standards and precise specifications set by the original equipment manufacturer. Part number 581 47 61-02, this kit includes all the necessary components to rebuild the cylinder assembly, including the cylinder, piston, rings, wrist pin, and circlips. With precision engineering and high-quality materials, this Cylinder Overhaul Kit from Husqvarna is an excellent choice for maintaining and upgrading your equipment.
Husqvarna K750, K760, and K760II aftermarket cylinder overhaul kit.
SERVICE NOTE: The inlet plate option is to replace the original inlet plate found on the Husqvarna K750 and older style Husqvarna K760 cylinder. The new style replacement cylinder has wider intake ports, requiring the new style intake plate. If you have a Husqvarna K760II, you should not need the intake plate. Please use the measurements to confirm if you need the new style intake plate. The inlet plate measures 17.50mm between intake ports and 59.03mm wide overall. Both air filters are not included. Please choose the correct air filter for your application. Not compatible with greater than 10% ethanol fuel.
- "DHS Quality Parts" brand
- (D) designation in title refers to our internal inventory system (Kit D, Cylinder Kit) and does not reflect any service codes by Husqvarna
- Cylinder: 581 47 61-02, 5814761-02, 581476102
- Cylinder Base Gasket: 506 37 67-01, 5063767-01, 506376701
- Piston, Rings, Pin and Clips: 506 37 24-02, 5063724-02, 506372402
- Needle Cage Bearing: 503 25 56-01, 5032556-01, 503255601
- Engine Gasket Set: 506 38 53-05, 5063853-05, 506385305
- Crankshaft Bearings: 503 25 00-01, 5032500-01, 503250001
- Decompression Valve: 503 66 56-01, 5036656-01, 503665601
- Spark Plug: WSR6
- Air Filter: 506 36 72-02, 5063672-02, 506367202 --OR-- Air Filter: 574 36 23-01, 5743623-01, 574362301
- Optional inlet plate 574 23 18-02, 5742318-02, 574231802 if selected above
The inlet plate option is to replace the original inlet plate found on the K750 and older style K760 cylinder. The new style replacement cylinder has wider intake ports, requiring the new style intake plate. If you have a K760II, you should not need the intake plate. Please use the measurements below to confirm if you need the new style intake plate.
- For use on K760II cylinders with wider ports
- Inlet plate measures 17.50mm between intake ports
- Inlet plate measures 59.03mm wide overall
Crankcase Long Block | Husqvarna K750, K760, K760II | 581 72 19-09, 581 72 19-13
