The Wacker Neuson Key is a genuine OEM Key designed for a broad range of Wacker Neuson equipment, including CRT48 ride-on concrete trowels, CT48 walk-behind trowels, PTS4V centrifugal trash pumps, GPS and GS series portable generators, and the RD11V tandem roller. As a direct OEM replacement sourced from Wacker Neuson, part is manufactured to the same specification as the original, ensuring correct fitment across every compatible machine in the lineup. This key serves as a critical ignition and security component — matching the original in cut profile and material so it works with the existing switch cylinder without any modification. Whether you're servicing a CRT48-35V trowel on a finishing crew or getting a GPS9700 generator back online at a temporary power station, the is the correct part to restore full operation.
Key Features
- OEM-Matched Cut Profile — Manufactured to the exact key blank specification used at the factory, so the cut engages the ignition switch cylinder correctly on every compatible model.
- Broad Cross-Family Fitment — A single part number covers CRT48 and CT48 ride-on and walk-behind trowels, PTS4V trash pumps, GPS9700 and GS series generators, and the RD11V roller — one replacement sourced for multiple machines on your fleet.
- Direct Drop-In Replacement — Matches the original key blank in material and profile, allowing straightforward substitution into the existing ignition switch without rekeying or additional hardware.
- Ignition Security Integrity — A correctly cut key maintains the security pairing with the switch cylinder; a worn or poorly copied key can cause intermittent start failures, switch wear, or unintended machine access on active job sites.
- Genuine Wacker Neuson OEM Part — Supplied as genuine OEM, meaning 5000118483 carries the same part number validated across all listed model variants and serial number ranges in Wacker Neuson's parts system.
The ignition key is the mechanical interface between the operator and the machine's starting and electrical system. When inserted and turned, it actuates the ignition switch to supply power to the starter circuit, fuel system, and onboard controls — enabling the engine to crank and run. A key that is worn, broken, or cut to an incorrect profile can fail to rotate the switch cylinder fully, leading to intermittent no-start conditions, accelerated wear on the ignition switch tumbler, or an inability to shut the machine down cleanly. Replacing a damaged or lost key with the correct OEM part restores predictable, secure operation and protects the ignition switch from further wear caused by a mismatched blank.
Part Details
| Part Number | 5000118483 |
|---|---|
| Old Part Number | 0118483 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Key |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CRT48-35V | CRT48-35V | 5000620112 |
| CRT48-35V | CRT48-35V EU | 5000620807 |
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| 1220mm/48in Ride-on Trowel | CRT48-31V | 5000620476 |
| 100mm/4in Centrifugal Trash Pu mp | PTS4V | 5000007691, 5000007683, 5000620971, 5100031221 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| Portable Generator with Electr ic Start | GPS9700 | 5000008287, 5000620264, 5200005042, 5000620973, 5100036768 |
| Portable Generator with Electr ic Start | GPS8500 | 5000008286 |
| 1220mm/48in High Speed Ride-On Trowel | CRT48-31V-H | 5000009086 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11V | 5000007694 |
| Ride-on Trowel | CRT48-31V-E | 5000009481 |
| Ride-on Trowel | CRT48-31V-ES-E | 5000009482 |
| Portable Generator with Electr ic Start | GS8.5V | 5000007661 |
| 1220mm/48in Ride-on Trowel, El ectronic Steering | CRT48-31V-ES | 5000009216 |
| Portable Generator with Electr ic Start | GS9.7V | 5000007662 |
| PTS4V(I) Pump | PTS4V(I) | 5000620972 |
| CRT48-37V Trowel | CRT48-37V | 5100024209 |
| CRT48-37V Trowel, Power Steer | CRT48-37V-PS | 5100024291 |
| CRT48-35V, Power Steer | CRT48-35V-PS | 5200016909 |
| CRT48-37V | CRT48-37V EU | 5100024290 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
