The Wacker Neuson is a genuine OEM O-Ring 6.8 X 1.9 designed for the VP1030A and WP1030A single-direction vibratory plate compactor series, as well as the BS50-4As, BS60-4As, BS65-4As, BS68-4As, BS70-4As, BS72-4As, and BS62-4A gasoline vibratory rammer families. Sourced directly from Wacker Neuson, part matches the original factory seal in both dimensional specification and material grade, ensuring a true drop-in replacement. This O-Ring supports a wide cross-section of the Wacker Neuson compaction lineup, covering multiple machine configurations and shoe sizes across the BS and VP/WP plate series.
Key Features
- Exact Dimensional Match — Sized at 6.8 x 1.9 mm to the original factory specification, this genuine OEM seal seats correctly in its groove without gap or over-compression.
- Genuine OEM Sealing Material — Manufactured to Wacker Neuson's original elastomer compound, delivering the compression set resistance and chemical compatibility required for this application.
- Broad Compaction Equipment Fitment — Compatible with VP1030A and WP1030A vibratory plate compactors and the full BS50-4As, BS60-4As, BS65-4As, BS68-4As, BS70-4As, BS72-4As, and BS62-4A vibratory rammer families.
- Leak Prevention Where It Counts — A correctly seated O-Ring maintains internal fluid or air pressure integrity; a worn or degraded seal leads to leaks, contamination, and accelerated wear of surrounding components.
- Direct OEM Sourcing — Supplied under the genuine Wacker Neuson parts program, so the part number, fit, and material grade match what was installed at the factory — no guesswork on cross-referencing.
An O-Ring is a precision loop seal that sits in a machined groove between two mating surfaces, creating a fluid- or air-tight barrier under compression. In vibratory compaction equipment, O-Rings are used throughout the engine, fuel, and hydraulic sub-systems to prevent leaks at fittings, caps, valves, and housings. When an O-Ring ages, hardens, or is damaged during service, it loses its ability to maintain a proper seal — resulting in fluid loss, ingress of contaminants, or pressure drop that can affect machine operation. Replacing a worn O-Ring with the correct-size genuine part restores the seal and protects the components around it.
Part Details
| Part Number | 5000162175 |
|---|---|
| Old Part Number | 0162175 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring 6.8 X 1.9 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single direction vibratory plate WP1030A | WP1030A | 5000630015 |
| Single Direction Plate | WP1030Aw | 5000630110 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS62-4Ab/28 | BS62-4Ab/28 | 5100061966, 5100070526 |
| BS68-4Ab/28 | BS68-4Ab/28 | 5100061970, 5100070525, 5100070527 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-4A/28 | BS62-4A/28 | 5100068373 |
| BS68-4A/28 | BS68-4A/28 | 5100068375 |
| BS68-4A/28 CN | BS68-4A/28 CN | 5100070152 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
