Wacker Neuson 5000217167 Pin Metering Lever
Wacker Neuson

Wacker Neuson 5000217167 Pin Metering Lever

$2.35
(No reviews yet) Write a Review
SKU:
5000217167-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Pin Metering Lever designed for a broad range of Wacker Neuson vibratory rammers, backpack vibrators, pole vibrators, power units, and dewatering pumps — including the BS50-4As, BS60-4As, BS70-4As, BV35A-P, PV35A, and P35A series. As a factory-authorized component, the is manufactured to the same specifications as the original part, ensuring a direct drop-in fit with no guesswork. This part covers an extensive fitment range across multiple production variants and regional configurations, making it a go-to replacement for fleet operators and service technicians alike. Confirm your model number before ordering to ensure compatibility with your specific machine configuration.

Key Features

  • Genuine OEM Metering Precision — Manufactured by Wacker Neuson to exact dimensional tolerances, ensuring the lever engages and pivots at the correct travel distance for accurate fuel or fluid metering control.
  • Direct Drop-In Installation — Pin-style mounting means this lever replaces the original with a straightforward swap — no machining, drilling, or adapter hardware needed.
  • Wide Model Coverage — Fits BS50-4As, BS60-4As, BS70-4As, BS65-4As, BS72-4As, BS62-4A, BS68-4A, BV35A-P, PV35A, P35A, and PG1 series machines across US, EU, CN, and high-altitude configurations.
  • Consistent Throttle and Metering Response — A worn or damaged metering lever can cause erratic engine response, poor fuel delivery, or loss of operational control; replacing it restores predictable, repeatable machine behavior.
  • Sourced Direct from Wacker Neuson — Carries the Wacker Neuson OEM part number 5000217167, so you can cross-reference against your parts manual with confidence and eliminate the risk of ordering an incompatible substitute.

The Pin Metering Lever is a small but mechanically critical component in the throttle and fuel metering assembly of Wacker Neuson engines. It acts as a pivot link that translates operator input — or governor movement — into precise adjustments of the metering needle or throttle slide, directly influencing engine speed and fuel delivery. When this lever wears, bends, or loses its retaining pin, the metering action becomes inconsistent, leading to rough running, surging, or an engine that won't hold a set speed under load. Replacing it with a genuine OEM part like the 5000217167 restores the correct lever geometry and pivot action the engine was calibrated around.

Part Details

Part Number5000217167
Old Part Number0217167
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionPin Metering Lever

Compatibility & Fitment

Name Model Machine Number
BV 35A-P Backpack Vibrator BV35A-P 5000620398, 5000620617
Pole Vibrator PV35A 5000620401, 5000620618
Pole Vibrator PV35A EU 5000620890
Backpack Vibrator BV35A-P EU 5000620891
P35A Power Unit P35A 5000620364, 5000620956, 5000620958, 5100057755, 5100057756, 5000620616
Power Unit for Wet Screed P35A EU 5000620851, 5000620957
BS 50-4As 280 mm shoe BS50-4As 5100015099, 5200018219, 5200018226, 5100027197, 5100025357
BS 60-4As 280 mm shoe BS60-4As 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198
BS 70-4As 280 mm shoe BS70-4As 5100015124, 5100015126, 5100027199
BS50-4AS 11IN US BS50-4As 11in US 5100030598
BS50-4As 11in BS50-4As 11in 5100030599
BS60-4AS 11IN US BS60-4As 11in US 5100030605, 5100054151
BS60-4As 11in BS60-4As 11in 5100030606, 5100037562, 5100051581
BS70-4As 11in US BS70-4As 11in US 5100030610
BS70-4As 11IN BS70-4As 11in 5100030611
Dewatering Pump PG1 5100031509
Rammer BS60-4As 11in CN BS60-4As 11in CN 5100058869
BS65-4As 11in BS65-4As 11in 5100061307
BS72-4As 11in BS72-4As 11in 5100061309
BS62-4Ab/28 BS62-4Ab/28 5100061966, 5100070526
BS68-4Ab/28 BS68-4Ab/28 5100061970, 5100070525, 5100070527
4 stroke rammer BS50-4As, 280 mm adapter BS50-4As 11in o. bsz 5100068310
BS62-4A/28 BS62-4A/28 5100068373
BS68-4A/28 BS68-4A/28 5100068375
BS68-4A/28 CN BS68-4A/28 CN 5100070152

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.