The Wacker Neuson 0165078 is a genuine OEM Hose Clamp designed for the BS and DS series vibratory rammers, including the BS60-2, BS60-2i, BS60-4, BS60-4s, BS60-4As, BS65-V, BS70-2, BS70-2i, BS70-4As, BS50-4As, BS72-4As, and DS70 models. As a direct OEM replacement sourced from Wacker Neuson, part 0165078 is manufactured to the same standard as the original component installed at the factory. This clamp serves across a wide range of two-cycle, four-cycle, oil-injected, and diesel rammer configurations, making it a versatile service part for shops and operators maintaining multiple units. Confirming your model number before ordering ensures a correct, trouble-free installation.
Key Features
- Genuine OEM Construction — Manufactured to Wacker Neuson's original material and dimensional specifications for hose retention, ensuring consistent clamping force and a secure, leak-free seal.
- Direct Drop-In Replacement — Matches the original clamp diameter, band width, and screw drive style, so installation follows the same procedure as the factory-fitted component.
- Broad Rammer Fitment — Compatible with BS60-2, BS60-2i, BS60-4s, BS60-4As, BS65-V, BS70-2, BS70-2i, BS70-4As, BS50-4As, BS72-4As, and DS70 vibratory rammer models across multiple configurations and markets.
- Maintains Fluid System Integrity — A correctly clamped hose prevents oil or fuel seepage that can contaminate the rammer's lower end or create fire risk, keeping the machine performing at rated compaction output.
- Fuel and Oil System Safety — On rammers that route oil-injection or fuel lines through clamped hose connections, a properly seated clamp is essential to prevent leaks that pose ignition or environmental hazards.
- Verified Part Number — Sold as Wacker Neuson 0165078, cross-referenceable directly against your parts manual for confidence before you order.
A hose clamp secures flexible hose connections within a machine's fluid routing system — such as fuel lines, oil-injection lines, or coolant passages — by applying even radial pressure around the hose to prevent it from loosening or weeping under vibration and temperature cycling. On vibratory rammers like the BS and DS series, which operate under continuous high-frequency impact, maintaining tight hose connections is especially critical because sustained vibration can gradually work a loose clamp free. A failed or slipped clamp can allow fuel or oil to escape, leading to contamination of surrounding components, increased fire risk, and loss of lubrication to engine internals — any of which can result in engine damage or an unsafe operating condition.
Part Details
| Part Number | 0165078 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Hose Clamp |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 280mm/11in Shoe, Oil-injected High Alt. Rammer | BS60-2i | 5000009393, 5000009339, 5000620906, 5000620613, 5000620614, 5200000664, 5200000645, 5200000665, 5200000646, 5200000690, 5200000682, 5200000689, 5100014908, 5100028038 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000673, 5200000672, 5200000650, 5100014909, 5100016653 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009420, 5000009419 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009391, 5000009388, 5100014847, 5200000666 |
| Oil-injected Rammer with 280mm /11in | BS70-2i EU | 5000009428, 5000009426 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009399, 5000009397, 5100014905, 5100016652, 5200000676 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Vibratory Rammer with 330mm/13 in Shoe | BS70-2 EU | 5000009425, 5000009424, 5000009427 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-4s | 5000620909, 5000620387, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000648, 5200000683, 5200000668, 5200000647, 5200000667, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620813, 5000620483, 5000620074, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620054, 5000620052, 5000620911, 5000620053, 5200010976, 5000009342, 5000009402, 5000009403 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| 280/11in Shoe, Vibratory Ramme r | MS62 | 5200004690 |
| BS50-4As 11IN | BS50-4As | 5200018219, 5100015099, 5100027197 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018233, 5200018231, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5000009396, 5100016651 |
| 280/11in Shoe, Vibratory Ramme r | BS50-4s | 5200000680 |
| BS60-4As 11in | BS60-4As 11in | 5100037562, 5100030606, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2PLUS 11IN HA US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS60-2 11IN | BS60-2 11in | 5100037561, 5100030600, 5100051580 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
| DS70 | DS70Y 13in | 5100060830, 5100030612 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| DS70 | DS70Y 13in LRC | 5100065736 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
