The Multiquip 28422ZE2W01 Starter Ratchet is a genuine OEM component designed for a broad range of Honda-powered Multiquip equipment, including MVH208GH, MVH308GH, and MVH408GH plate compactors, MRH800GS and V305EH walk-behind rollers, MC and WM series concrete and mortar mixers, GA series gasoline generators, SP and MP series saws, and QP series pumps. As a direct Multiquip OEM part, 28422ZE2W01 is manufactured to the same specification as the original component it replaces, ensuring a correct fit within the recoil starter assembly. This is the exact part used in initial production, so there is no guesswork on compatibility across the wide range of Honda-engine platforms it serves. If your equipment is showing signs of a worn or broken starter ratchet, replacing it with the correct OEM part gets the recoil system back to full operation quickly.
Key Features
- Genuine OEM Ratchet Tooth Integrity — Manufactured to Honda engine tolerances, ensuring the ratchet engages the starter cup cleanly without slipping or skipping under pull-start load.
- Drop-In Recoil Assembly Fit — Installs directly into the existing recoil starter housing with no modification to the starter cup, spring, or pawl carrier.
- Wide Equipment Compatibility — Fits Honda-powered units across multiple Multiquip families including MVH plate compactors, MRH and V-series walk-behind rollers, MC and WM mixers, GA generators, SP and MP saws, and QP pumps.
- Restores Full Pull-Start Function — A worn or fractured ratchet causes the starter cord to spin without cranking the engine; replacing it with 28422ZE2W01 fully restores engine engagement on each pull.
- Correct Part for Honda-Engined Platforms — Sourced directly through Multiquip's OEM supply chain, this ratchet is the specified replacement across all listed Honda-powered models, eliminating substitution risk.
The starter ratchet is a small but critical component inside the recoil pull-start assembly. When you pull the starter cord, the ratchet engages a corresponding drive cup on the engine flywheel, transferring the rotational force needed to crank the engine over. Once the engine fires, the ratchet automatically disengages so the now-spinning flywheel does not drive the starter mechanism in reverse. When the ratchet teeth wear down, chip, or break, the pull cord moves freely but the engine never receives that cranking force — making the machine impossible to start by hand. Replacing the ratchet promptly restores reliable recoil starting and protects the surrounding starter components from further wear caused by a damaged pawl.
Part Details
| Part Number | 28422ZE2W01 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Starter Ratchet |
Compatibility & Fitment
| Name | Model |
|---|---|
| MQ Mixers | MC94P/S |
| Rollers | MRH800GS |
| MQ Mixers | MC94SK/MC94PK |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| Rollers | V305EH |
| MQ Mixers | MC12PH |
| Welders | GAW180HE |
| Welders | GAW180HE1 |
| Welders | GAW180HEA |
| Gasoline Powered Generators | GA3.6HR |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| Gasoline Powered Generators | GA6HEB |
| Gasoline Powered Generators | GA6HB |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Saws | SP118 |
| Gasoline Powered Generators | GA9.7HE |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Rollers | R2000H |
| Saws | SP1CE13H18 |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA3.6HZ |
| Plate Compactors | MVH304GSB |
| Gasoline Powered Generators | GA6HZ |
| Centrifugal Pumps | QP402H |
| Trash Pumps | QP3TH |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
