Multiquip 90016ZE1000 Flange Bolt 6x13
Multiquip

Multiquip 90016ZE1000 Flange Bolt 6x13

$7.46
(No reviews yet) Write a Review
SKU:
90016ZE1000-Multiquip
Adding... The item has been added

The Multiquip 90016ZE1000 is a genuine OEM Flange Bolt 6x13 designed for a wide range of Multiquip and Whiteman equipment including MVC, MVH, and MVB series plate compactors, MP and SP series masonry and pavement saws, MC and WM series mixers, and select concrete vibrators and centrifugal pumps. As a factory-sourced fastener, 90016ZE1000 matches the exact thread pitch, head geometry, and flange profile specified by Multiquip for original assembly. Confirmed fitment spans models including MVC82VHW, MVC82VH, MVC88VTHW, MVC88VTH, MVC64VHW, MVC64VH, MVC90H, MVH128GH, MVH158GH, MVB85H, SP1G, MP1455HP, MP120E, MP115E, MP1H, G55H, QP205SH, MC64P/S, and WM70S/P. Keep a few on hand — this hardware turns up across multiple assemblies throughout the machine.

Key Features

  • Genuine OEM Fastener Integrity — Sourced directly from Multiquip, this flange bolt meets the original torque and clamping specifications required for secure assembly across all listed models.
  • Integrated Flange Design — The built-in flange distributes clamping load evenly across the mating surface, eliminating the need for a separate washer and reducing the risk of surface damage or loosening under vibration.
  • Broad Cross-Model Compatibility — A single part number covers plate compactors (MVC, MVH, MVB), masonry and pavement saws (MP, SP), mixers (MC, WM), vibrators, and centrifugal pumps — making it a practical stock item for mixed fleets.
  • Vibration-Resistant Retention — Equipment like plate compactors and concrete vibrators generate continuous vibration that can work fasteners loose over time; the correct flange bolt geometry helps maintain clamping force through extended operation cycles.
  • Direct OEM Replacement — Threads, shank diameter, length, and head profile match the original hardware, allowing straightforward installation without re-tapping or shimming.

A flange bolt combines a standard hex bolt with an integrated washer-like flange beneath the head, spreading the clamping load across a wider surface area than a conventional bolt alone. On equipment subject to sustained vibration — such as plate compactors, rammers, and power saws — proper fastener specification is critical: undersized or incorrect-grade bolts can back out, strip threads, or allow components to shift under load. Using the correct OEM-specified hardware like the 90016ZE1000 ensures joints stay properly torqued and assemblies remain aligned through the demands of everyday site work.

Part Details

Part Number90016ZE1000
BrandMultiquip
Part TypeGenuine OEM
DescriptionFlange Bolt 6x13

Compatibility & Fitment

Name Model
Plate Compactors MVH128GH
Plate Compactors MVC82VHW
Plate Compactors MVC82VH
Saws SP1G
Plate Compactors MVB85H
Plate Compactors MVH158GH
Plate Compactors MVC88VTHW
Plate Compactors MVC88VTH
Saws MP1455HP
Saws MP120E
Saws MP115E
Saws MP1H
Plate Compactors MVC90H
Vibrators G55H
Centrifugal Pumps QP205SH
Plate Compactors MVC64VHW
Plate Compactors MVC64VH
MQ Mixers MC64P/S
Whiteman Mixers WM70S/P

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.