The Multiquip EM514606 2000 PSI Hose is a genuine OEM hydraulic hose designed for LS-series hydraulic-driven concrete pumps, including the LS400, LS40D, LS40TD, LS50TD, LS60TD, LS500, LS600, and LS600P. As a factory-sourced component, the EM514606 meets the original pressure ratings and dimensional specifications required to maintain safe, consistent hydraulic circuit operation on these machines. Sourced directly through Multiquip's authorized parts network, this hose is the correct drop-in replacement for worn or damaged hoses on your Mayco LS-series concrete pump. Verify your model against the fitment list before ordering to ensure an accurate match.
Key Features
- Rated to 2000 PSI Working Pressure — Built to handle the hydraulic demands of LS-series concrete pump circuits without pressure loss or premature failure.
- Genuine OEM Construction — Factory-sourced hose with correct end fittings, inner diameter, and reinforcement layer to match the original hydraulic line configuration.
- Broad LS-Series Fitment — Compatible with LS400, LS40D, LS40TD, LS50TD, LS60TD, LS500, LS600, and LS600P concrete pumps.
- Direct-Swap Replacement — Connects to existing hydraulic ports and mounting points on covered models without reworking fittings or routing.
- Protects Pump Output Consistency — A compromised hydraulic hose can cause erratic pump cycling or complete loss of hydraulic drive pressure; replacing with a correctly rated hose restores full, steady concrete output.
- Hydraulic System Safety — A hose operating at or above its rated working pressure that shows cracking, swelling, or leaking poses a burst risk; replacing with the correct OEM-rated line is a critical safety measure on high-pressure pump circuits.
The 2000 PSI hose on an LS-series hydraulic concrete pump carries pressurized fluid between the hydraulic power unit and the pump's drive cylinders, translating engine power into the reciprocating force that moves concrete through the delivery line. Because these hoses operate under sustained high pressure during every pumping cycle, a worn or cracked hose reduces circuit efficiency, causes fluid loss, and can lead to uneven or interrupted concrete delivery. Replacing a degraded hose promptly with a correctly rated OEM component keeps hydraulic pressure stable and the pump cycling as intended.
Part number EM514606 is sold by DHS Equipment as an authorized Multiquip parts dealer. For fitment questions or help confirming compatibility with your specific LS-series pump configuration, contact the DHS Equipment team directly.
Part Details
| Part Number | EM514606 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | 2000 PSI Hose |
Compatibility & Fitment
| Name | Model |
|---|---|
| Mayco Pumps | LS400 |
| Mayco Pumps | LS60TD |
| Mayco Pumps | LS40D |
| Mayco Pumps | LS40TD |
| Mayco Pumps | LS50TD |
| Mayco Pumps | LS500 |
| Mayco Pumps | LS600 |
| Mayco Pumps | LS600P |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
