The Multiquip 30701 is a genuine OEM Harness Fusible Link Kit 80A designed for Multiquip rammer and plate compactor models including MTR40HF, MTX50HD, MTX60HD, MTX70HD, MTX70HDR, MTX80HDR, and MVC40H. As a direct OEM component, part 30701 is manufactured to the exact electrical specifications of the original wiring harness assembly, ensuring correct amperage protection and a drop-in connection to the existing harness. Sourcing the correct fusible link harness is critical — an undersized or mismatched link can fail to protect the circuit, while an oversized one may not interrupt a fault before damage occurs. DHS Equipment stocks this part to get your compaction equipment back in service fast.
Key Features
- Correct 80A Rating: — Matched to the original circuit load requirements of Multiquip rammer and plate compactor electrical systems, ensuring proper overcurrent protection without nuisance trips.
- Genuine OEM Construction: — Manufactured by Multiquip to the same harness connector specifications as the original, so the plug-in connection aligns with the existing wiring without splicing or adapting.
- Broad Compaction Equipment Fitment: — Compatible with MTR40HF, MTX50HD, MTX60HD, MTX70HD, MTX70HDR, MTX80HDR, and MVC40H models, covering both the MTX rammer series and MVC plate compactor family.
- Circuit and Component Protection: — A functioning fusible link safeguards the starter, ignition, and ancillary circuits; a blown or degraded link can leave the machine completely inoperable and expose downstream components to uncontrolled current.
- Electrical Safety Compliance: — Replacing a failed fusible link with the OEM-rated 80A unit maintains the designed fault-protection threshold, reducing risk of wiring damage, overheating, or fire caused by an incorrectly rated substitute.
A fusible link is a short section of intentionally lower-rated wire built into the main harness that acts as a last line of defense for the electrical system. When a short circuit or severe overload occurs, the fusible link melts and interrupts the circuit before the fault can travel to the engine, starter motor, or other wiring. On Multiquip rammers and plate compactors, this 80A harness assembly connects at the battery or main power feed point and must be replaced with the correct amperage rating to restore designed protection. Using an incorrectly rated link — or bypassing it entirely — can result in unprotected wiring, component damage, or a fire hazard on the machine.
Part Details
| Part Number | 30701 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Harness Fusible Link Kit 80A |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rammers | MTR40HF |
| Rammers | MTX70HDR |
| Rammers | MTX80HDR |
| Plate Compactors | MVC40H |
| Rammers | MTX50HD |
| Rammers | MTX60HD |
| Rammers | MTX70HD |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip