Pump Power Secrets: Suction, PSI & Delivery Explained!

Maintenance Tips · Short

Pump Power Secrets: Suction, PSI & Delivery Explained!

Published Duration

About this video

Pump Power Secrets: Suction, PSI & Delivery Explained! 💧 Ever wonder how to actually test a water pump's performance? In this short, we break down the two key measurements every pump pro needs to know: 🔧 Suction Test — Using a vacuum gauge measured in inches of mercury. Quick rule: 1 inch of mercury = 1 foot of suction lift ⚡ Discharge Pressure Test — Measured in PSI. Here's the math: 1 PSI = 2.3 feet of delivery height Example: A pump rated for 95 feet of delivery height should read about 41 PSI on the discharge test. Now you can verify your pump is performing to spec! Save this one for the next time you're troubleshooting flow issues. 👇

Transcript

5 segments · auto-generated captions
0:00

The suction test is going to be done with the use of a vacuum gauge. The vacuum gauge is measured in inches of mercury. 1 inch of mercury on the gauge

0:10

is equal to 1 foot of suction lift. Uh so we're going to do the the suction gauge the suction test and we're [clears throat] going to do a discharge pressure test. The discharge

0:19

pressure test is measured in PSI. 1 PSI is equal to 2.3 foot of delivery height. That's if we're if we're discharging the

0:29

water straight up. That's what delivery height is. So 1 PSI is equal to 2.3 feet of delivery height. This particular pump is

0:38

has a spec of 95 feet. So 95 feet 2.3 feet per inch we should be measuring about 41 PSI when we do our test.