The Wacker Neuson Clamp is a genuine OEM component designed for the E3000, E2200, HSH, HI750, HI900, HX, HHS, BP45, and Pureheat series hydronic surface heaters, ground heaters, indirect-fired air heaters, heat exchangers, hose handling systems, and booster pump equipment. As a direct OEM replacement, part is manufactured to the exact material and dimensional standards specified for these machines, ensuring a proper, secure connection within the fluid or air distribution system. This clamp services an exceptionally broad range of Wacker Neuson heating and climate equipment, making it a smart stocking item for contractors and rental fleets running multiple units across a jobsite.
Key Features
- Genuine OEM Material Integrity — Manufactured to Wacker Neuson's original material specification, delivering the clamping force and corrosion resistance required in hydronic and heated-air fluid systems.
- Drop-In Replacement — Matches the original clamp geometry and band width exactly, so it seats and secures without reworking surrounding hose connections or fittings.
- Broad Heating Equipment Compatibility — Fits E3000 and E2200 ground and hydronic surface heaters, HI750 and HI900 indirect-fired air heaters, HX50/HX60/HX100/HX200 heat exchangers, HHS hose handling systems, BP45 booster pump, and Pureheat hydronic heaters.
- Leak-Free Clamping Performance — A correctly seated clamp maintains positive hose-to-fitting seals under operating pressure; a failed or over-torqued clamp leads to fluid weeps, heat loss, and unplanned service stops.
- Fluid System Safety — In hydronic and indirect-fired heating systems, a compromised clamp can allow hot fluid or combustion-adjacent connections to loosen; using the correct OEM-spec clamp keeps the system sealed and operating as designed.
A clamp in a hydronic or indirect-fired heating system holds hose assemblies firmly onto barbed or threaded fittings within the fluid circuit, preventing leaks at every connection point where coolant, glycol solution, or heated water transfers between components. When a clamp weakens, corrodes, or loses its clamping tension, fluid begins to seep past the hose bead, reducing system pressure and heating output while potentially exposing nearby electrical or burner components to moisture. Replacing a worn clamp promptly with the correct OEM part restores a fully sealed circuit and protects the surrounding components from secondary damage.
Part Details
| Part Number | 5000168356 |
|---|---|
| Old Part Number | 0168356 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Clamp |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| HSH700 | HSH700G | 5000620243 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| HX 60 Heat Exchanger, 230 V | HX60 | 5000620251 |
| HX200 Heat Exchanger | HX200 | 5000620430 |
| HX50 Heat Exchanger | HX50 | 5000620431 |
| HHS702 Hose Handling System | HHS702 | 5000620426 |
| BP45 Pureheat Booster Pump, 1.5hp | BP45 | 5000620433 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620246, 5000620190 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| HSH650 | HSH650 | 5000620991 |
| HI750 DGM,SB HEATER-INDIRECT | HI750GM | 5000620930, 5000620859 |
| Mobile Indirect Fired Air Heat er, Diesel | HI750D | 5000620856, 5000620923, 5000620924 |
| HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 | HI750GMHD | 5000620969 |
| HI750G HEATER-INDIRECT | HI750G | 5000620857, 5000620928, 5000620929 |
| HHS2202 Hose Handling System | HHS2202 | 5000620423 |
| Hose Handling System | HHS2200 | 5000620418 |
| Hose Handling System | HHS3000 | 5000620419 |
| Hose Handling System | HHS700M | 5000620420 |
| Hose Handling System | HHS1101 | 5000620421 |
| HHS3002 Hose Handling System | HHS3002 | 5000620424 |
| HHS3004 Hose Handling System | HHS3004 | 5000620425 |
| HX100 Heat Exchanger | HX100 | 5000620432 |
| HHS2502 Hose Handling System | HHS2502 | 5200003554 |
| Hose Handling System | HHS1701 | 5000620422 |
| HI900 Heater-DGM,Srg,-40 | HI900DGM | 5200014221, 5200014222, 5200014166 |
| HI 900D Heater-Indirect | HI900D | 5200014158, 5200014159, 5200014160 |
| Skid Indirect Air Heaters Natu ral Gas | HI900G | 5200014161 |
| HI 900G Heater-Indirect,3x16 | HI900 G | 5200014163, 5200014164 |
| HI260 HEATER,OIL WITH TANK | HI260 | 5200018503 |
| HHS1251 Hose Handling System | HHS1251 | 5200019011 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
