The Wacker Neuson Eccentric Weight is a genuine OEM component designed for the HP, HPG, HE, HC, SC, and SE vibratory truss screed series. As a direct OEM replacement, part is manufactured to the same specifications as the original, ensuring the vibration output and compaction energy your screed was built to deliver. This part is compatible across a wide range of power sections and screed sections, including the HP50, HP100, HPG50, HPG100, HE25, HE50, HE100, HC25, HC50, HC100, SC25, SC50, SC75, SE25, SE50, SE75, and SP50/SP75 configurations.
Key Features
- Genuine OEM Vibration Calibration — Manufactured to the original mass and geometry specification, ensuring the eccentric weight generates the correct centrifugal force output for your screed model.
- Direct Bolt-In Replacement — Matches the original mounting interface and balance profile of the shaft assembly, allowing straightforward installation without modification to surrounding components.
- Broad Screed Series Compatibility — Verified fitment across HP, HPG, HE, HC, SC, and SE vibratory truss screed power sections and center/end sections, covering both standard and gasoline-powered configurations.
- Consistent Surface Consolidation — A correctly weighted eccentric ensures even energy distribution across the screed beam, producing a uniform, well-consolidated concrete surface finish on every pass.
- Operational Safety — A worn or out-of-spec eccentric weight can cause erratic vibration, excessive bearing load, and premature shaft failure. Replacing with a genuine OEM part restores balanced rotation and protects surrounding drive components.
The eccentric weight is the core vibration-generating component inside a vibratory truss screed's power or screed section. As it rotates at high speed on the vibrator shaft, its offset mass creates centrifugal force that is transmitted through the screed beam into the fresh concrete below, consolidating the mix and bringing paste to the surface for a smooth, level finish. When the eccentric weight is worn, damaged, or running out of specification, vibration amplitude drops or becomes uneven, leading to inconsistent consolidation, surface voids, and accelerated wear on the bearings and shaft. Replacing part 5000116396 with a genuine Wacker Neuson component restores the designed energy output and protects the integrity of the entire vibrator assembly.
Part Details
| Part Number | 5000116396 |
|---|---|
| Old Part Number | 0116396 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Eccentric Weight |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| HPG100A | HPG100A | 5000009507 |
| HP50A | HP50A | 5000009508 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HPG50A | HPG50A | 5000009509 |
| HE25 | HE25 | 5000130382, 5000115713 |
| HE100 | HE100 | 5000130384, 5000115711 |
| HC25 | HC25 | 5000130376, 5000115710 |
| HC50 | HC50 | 5000130377, 5000115709 |
| HC100 | HC100 | 5000130378, 5000115708 |
| HE50 | HE50 | 5000130383, 5000115712 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| SC 75_0115717 Section | SC75 | 5000115717 |
| SC 50_0115718 Section | SC50 | 5000115718 |
| Vibratory Truss Screed,Center Section | SC25 | 5000115719 |
| SE 75_0115720 ction | SE75 | 5000115720 |
| SE 50_0115721 ction | SE50 | 5000115721 |
| SE 25_0115722 ction | SE25 | 5000115722 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
