The Wacker Neuson Bolt is a genuine OEM fastener used across a wide range of Wacker Neuson equipment, including PT2 trash pumps, CT36-6 concrete trowels, VP and WP series vibratory plate compactors, GP and GPi portable generators, PDT and PDI diaphragm pumps, PG dewatering pumps, and BFS floor saws. As a direct OEM replacement, this bolt is manufactured to the exact material grade, thread specification, and dimensional tolerances required by each application it serves. Whether you are servicing compaction equipment, concrete finishing machines, pumps, or power generation units, part number is the correct factory-specified fastener for the job. Cross-reference your machine's model and serial number before ordering to confirm fitment.
Key Features
- OEM-Grade Fastener Integrity — Manufactured to the exact thread form, shank diameter, and material hardness specified by Wacker Neuson, ensuring proper clamping force and torque compliance across every application.
- Drop-In Installation — Matches the original bolt in head size, thread pitch, and length so it seats and torques correctly without modification to mating components or hardware.
- Broad Cross-Equipment Fitment — A single part number covering VP and WP vibratory plates, PT2 and PDT trash and diaphragm pumps, CT36-6 concrete trowels, GP and GPi generators, PG dewatering pumps, and BFS floor saws.
- Structural Connection Reliability — A correctly torqued OEM bolt maintains the integrity of the assemblies it secures; a worn, stretched, or incorrect-grade fastener can allow joint movement, component misalignment, or premature wear of surrounding parts.
- Torque-Critical Applications — In fuel system, pump housing, and rotating-assembly applications, using the correct bolt grade and specification is essential to preventing fluid leaks, housing failures, and vibration-induced loosening.
A bolt in construction equipment does far more than hold two parts together — it is a precision fastener engineered to maintain a specific clamping load under dynamic stress, vibration, and thermal cycling. In vibratory compaction equipment and pump housings in particular, fasteners are exposed to continuous mechanical vibration that can cause under-spec bolts to loosen, fatigue, or shear. Using the correct OEM-specified bolt ensures the joint maintains its design load capacity throughout the service interval. When a bolt fails or is substituted with an incorrect grade or size, surrounding components can shift, leak, or sustain accelerated wear, turning a minor fastener replacement into a much larger repair.
Part Details
| Part Number | 5000156466 |
|---|---|
| Old Part Number | 0156466 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bolt |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| Vibratory Soil Plate, 50 kN | VP50H | 5000009542 |
| Vibratory Soil Plate, 60 kN | VP60H | 5000009543 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| VP50Hw-VIBROPLATE | VP50Hw | 5000630096 |
| VP60Hw-VIBROPLATE | VP60Hw | 5000630097 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| Portable Inverter Generator | GPi3200 | 5000620779, 5000620960, 5000620781 |
| Portable Inverter Generator | GPSi3200 | 5000620780, 5000620961, 5000620936 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
