The Wacker Neuson Case Seal is a genuine OEM component designed for the RT and RTL/RTK/RTx series remote-controlled vibratory trench rollers. As a direct factory replacement, this seal is produced to Wacker Neuson's original material and dimensional specifications, ensuring it installs and performs exactly as the original. Fitment spans a wide range of trench roller variants including the RT56-SC, RT82-SC, RT82-SC2, RTLx-SC3, RTKx-SC3, RTx-SC2, and the HTC15, covering both standard and EU-market configurations. Sourcing the correct OEM seal by part number is the surest way to protect the internal components of your trench roller's drivetrain.
Key Features
- OEM Material Integrity — Manufactured to Wacker Neuson's original compound and hardness specification, delivering the same sealing performance as the unit your machine shipped with.
- Drop-In Fitment — Engineered to match the original case bore dimensions exactly, allowing straightforward installation without machining or shimming.
- Broad Trench Roller Compatibility — Covers RT56-SC, RT82-SC, RT82-SC2, RTLx-SC3, RTKx-SC3, RTx-SC2, and HTC15 series, including Compatec-equipped variants and EU-market models.
- Protects Internal Drive Components — A properly seated case seal keeps lubricants in and contaminants out; a failed seal allows ingress of water and debris that rapidly accelerates bearing and gear wear.
- Leak Prevention Under Vibration Load — Trench rollers operate under sustained high-frequency vibration; this seal is rated to maintain its compression and sealing capacity under those continuous dynamic loads.
A case seal forms the critical barrier between the rotating drivetrain components inside the roller's gear case and the external environment. It retains the lubricating oil that keeps gears and bearings running cool and protected, while blocking dirt, water, and trench debris from entering the housing. When a case seal deteriorates or is displaced, oil loss follows quickly, and without adequate lubrication the internal components of the drive case can overheat and seize — turning a low-cost seal replacement into a major drivetrain repair. Replacing a worn or leaking case seal promptly is one of the most cost-effective preventive maintenance steps on any vibratory trench roller.
Part Details
| Part Number | 5000164704 |
|---|---|
| Old Part Number | 0164704 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Case Seal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| Vibratory Trench Roller | RT82-SC | 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482 |
| Vibratory Trench Roller | RT56-SC | 5000009026, 5000620366 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
