The Wacker Neuson is a genuine OEM Stud 1/2-13X4.5 Full Thread designed for the G150, G180, G230, and G240 series portable generators. As a direct factory replacement, this stud is manufactured to the exact thread pitch, diameter, and length required by the original design — no guesswork on fitment. It covers an extensive range of G-series generator configurations including standard, cold weather, custom, and Transport Canada variants across Tier 3 and Tier 4 emission levels. Sourcing the correct OEM stud ensures the joint integrity and clamping force that the original assembly depends on are fully maintained.
Key Features
- Full-Thread OEM Specification: — Genuine Wacker Neuson part engineered to the exact 1/2-13 thread form and 4.5-inch length, ensuring correct thread engagement and clamping load across the full stud length.
- Direct Factory Replacement: — Threads into the original tapped bore without rework; the full-thread profile mates precisely with the corresponding hardware in the generator assembly.
- Broad G-Series Compatibility: — Confirmed fitment across G150, G180, G230, and G240 portable generator families, including standard, cold weather, custom, 600V, and Transport Canada configurations spanning Tier 3 through Tier 4 Final emission ratings.
- Structural Joint Integrity: — A correctly torqued, undamaged stud maintains the clamping force that keeps critical generator panels, brackets, or covers sealed and secure under continuous vibration and load cycling.
- Genuine OEM Part: — Sourced directly from Wacker Neuson, carrying the same part number 5000171489 used in original production builds — important when matching hardware on multi-unit fleet generators.
A full-thread stud is a headless fastener threaded along its entire length, designed to be permanently set into one component while accepting a nut on the exposed end to clamp a second component in place. In generator applications, studs of this type are commonly used where bolt access is restricted or where a fixed, repeatable clamping point is required — such as mounting covers, frames, or service panels. When a stud is damaged, stripped, or corroded, the joint cannot develop proper clamping force, which can lead to loose assemblies, vibration-induced failures, or fluid and weather ingress in outdoor generator enclosures.
Part Details
| Part Number | 5000171489 |
|---|---|
| Old Part Number | 0171489 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Stud 1/2-13X4.5 Full Thread |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| G150-GENERATOR, SKID, CUSTOM, DEERE T3 | G150 | 5000620657, 5200001321, 5200006902, 5000620656, 5000620306, 5000620655, 5200003160, 5000620889, 5000620307, 5200007860, 5000620308, 5000620887, 5000620888, 5200014784, 5200010135, 5200010136, 5200010137, 5200025554, 5100026980, 5100026981, 5100026982, 5100029212, 5100025830 |
| G180-GENERATOR, SKID, CUSTOM, DEERE T3 | G180 | 5000620660, 5200001322, 5200006903, 5000620303, 5000620658, 5000620659, 5200003161, 5000620886, 5000620884, 5200007861, 5000620304, 5000620885, 5000620305, 5200010140, 5200014470, 5200010138, 5200010139, 5200014471, 5100015615, 5200014469, 5200025555, 5100045089, 5100045575, 5100045576, 5100045590, 5100045591, 5100045592, 5100049844, 5100049845, 5100025832, 5100025842 |
| G240-GENERATOR, SKID, CUSTOM, DEERE T3 | G240 | 5000620663, 5200001323, 5200006904, 5000620662, 5000620300, 5000620661, 5200003162, 5000620301, 5000620302, 5200025556, 5100025834 |
| G230 Generator, Custom T4i | G230 | 5000620883, 5000620881, 5000620882, 5200007862, 5200010141, 5200010142, 5200010143, 5100015614, 5100045190, 5100045596, 5100045597, 5100049846, 5100049847 |
| G150 Generator,Hertz,T4 Final | G150 Generator,Hertz,T4 Final | 5100015616 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
