The Wacker Neuson Bolt M10X80 Flange is a genuine OEM fastener designed for a wide range of Wacker Neuson BFS floor saws, CRT ride-on trowels, and GV portable generators. Sourced directly from Wacker Neuson, this bolt meets the exact material and dimensional standards of the original hardware installed at the factory. Verified fitment spans multiple series including the BFS 1318, BFS 1345, and BFS 1350 floor saws, the CRT48-34V ride-on trowel, and the GV5000A, GV5003A, GV7000A, and GV7003A generator models. When you need to restore structural integrity to a fastened joint, this is the correct part for the job.
Key Features
- Genuine OEM Hardware Grade — Manufactured to Wacker Neuson's specified tensile strength and thread tolerance for M10X80 flange bolt applications, ensuring the clamping force and torque values match original assembly requirements.
- Integrated Flange Design — The built-in flange distributes clamping load across a wider bearing surface, seating flush without a separate washer and simplifying reassembly on the machine.
- Broad Cross-Series Fitment — A single part number covers BFS 1318, BFS 1345, and BFS 1350 floor saw series, CRT48-34V ride-on trowels, and GV5000A through GV7003A generator models, making it a practical stock item for mixed fleets.
- Structural Reliability Where It Counts — A stretched, corroded, or missing fastener in these assemblies can lead to component loosening, vibration-induced damage, or misalignment; replacing with the correct OEM bolt restores designed holding strength.
- Direct OEM Replacement — Part number 5000208612 matches the Wacker Neuson parts catalog precisely, so technicians can confirm the right bolt before wrenching, avoiding costly trial-and-error sourcing.
A flange bolt combines a standard hex-head bolt with a wide, integrated flange collar beneath the head that acts as a built-in washer. This flange spreads the clamping load over a larger surface area, reducing the risk of the fastener pulling through or damaging softer mating surfaces during tightening. When a flange bolt wears, strips, or is lost entirely, the joint it secures loses its designed holding force — allowing components to shift under the vibration and load demands typical of concrete cutting, troweling, and generator operation. Replacing it promptly with the correct OEM specification bolt keeps the assembly torqued to spec and operating as intended.
Part Details
| Part Number | 5000208612 |
|---|---|
| Old Part Number | 0208612 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bolt M10X80 Flange |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS1345 | BFS1345 | 5100029230, 5100054575 |
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| GV5000A | GV5000A | 5000009346, 5000009351, 5000009361, 5100006204 |
| GV7000A | GV7000A | 5000009348, 5000009353, 5100006205 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| BFS1350 | BFS1350 CN | 5100042680 |
| BFS1350 | BFS1350 | 5100054576, 5100029231 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BFS 1345 SAW,ABZ | BFS 1345ABZ | 5000610242 |
| GV5003A | GV5003A | 5100002154 |
| GV7003A | GV7003A | 5100002155 |
| Petrol Floor Saw BFS 1350AB | BFS 1350AB | 5100000089 |
| Petrol Floor Saw BFS 1350ABZ | BFS 1350ABZ | 5100000091 |
| Floor Saw | BFS 1318A | 5100004006 |
| Gasoline Powered Floor Saw | BFS 1345A | 5100004007 |
| BFS1345Az Floor Saw | BFS 1345Az | 5100004008 |
| Gasoline Powered Floor Saw | BFS 1350A | 5100004011 |
| Gasoline Powered Floor Saw | BFS 1350Az | 5100004012 |
| BFS1350 | BFS 1350 | 5100009933 |
| BFS1345 Floor Saw | BFS 1345 | 5100009944 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
