The Wacker Neuson is a genuine OEM Cylinder Head Gasket designed for a broad range of Wacker Neuson walk-behind concrete trowels and single-direction vibratory plate compactors. As a factory-sourced component, it is manufactured to the exact material grade and sealing specification required by the engine assemblies found across the CT24-4A, CT30ADT, VP1135A, VP1135AW, VP1030A, and WP1235A series, among others. Sourcing a genuine OEM part ensures the gasket seats and seals correctly against the cylinder head without rework or shimming. Whether you're servicing a concrete finishing machine or a plate compactor, part number covers a wide cross-section of Wacker Neuson engine-powered equipment.
Key Features
- Engine-Specific Sealing Material — Manufactured to the precise thickness, bore diameter, and compression rating required by Wacker Neuson's small-engine platforms across the CT and VP/WP families.
- Genuine OEM Part — Sourced directly from Wacker Neuson, this gasket carries the same part number used in original assembly, ensuring full traceability and specification conformance.
- Drop-In Installation — Designed to align exactly with the cylinder head bolt pattern and deck surface on compatible engines, making head rebuilds and top-end services straightforward.
- Wide Cross-Family Fitment — Covers CT24-4A and CT30ADT walk-behind trowels, VP1135A, VP1135AW, VP1030A vibroplates, WP1235A single-direction plates, AP1135A battery plates, and PDT/PDI pump series models.
- Combustion Integrity — A correctly sealed cylinder head maintains proper compression and prevents coolant or combustion gas bypass — both of which cause overheating, power loss, and accelerated engine wear if left uncorrected.
- Fuel and Combustion Safety — A failed or improperly rated head gasket can allow uncontrolled combustion gas escape; using the correct OEM-spec gasket is essential for safe engine operation on job sites.
The cylinder head gasket forms a critical pressure seal between the engine block and the cylinder head, containing combustion gases, oil passages, and coolant channels within their correct circuits. When this gasket degrades or fails — through heat cycling, overtorque, or age — compression drops, oil can enter the combustion chamber, and exhaust gases can contaminate the oil supply, leading to rapid engine damage. Replacing the 5000216514 as part of any top-end engine service restores proper compression and keeps the engine running at its designed output level.
Part Details
| Part Number | 5000216514 |
|---|---|
| Old Part Number | 0216514 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cylinder Head Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT24-4A Trowel | CT24-4A | 5000620105 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059, 5100029066, 5100018353 |
| 762mm/30in Walk-behind Trowel | CT30ADT | 5000008001, 5000008197 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| PDT2A | PDT2A | 5000620769 |
| PDI2A(I) | PDI2A(I) | 5000620772 |
| PDT3A | PDT3A | 5000620773 |
| PDI3A | PDI3A | 5000620775 |
| PDI3A(I) | PDI3A(I) | 5000620776 |
| VP1135AWSingle Direction Vibratory Plate | VP1135Aw US | 5100018350, 5100029063 |
| VP1135A-VIBROPLATE | VP1135A US | 5100018351, 5100029064 |
| VP1135Aw | VP1135Aw | 5100018352, 5100029065 |
| Single direction vibratory plate VP1030Aw | VP1030Aw | 5100018356 |
| Single direction vibratory plate VP1030A | VP1030A | 5100018357 |
| Vibration Plate | VP1135Aw CN | 5100039666 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
