The Wacker Neuson Power Supply Cable With PS And is a genuine OEM component designed for the IRFU series internal concrete vibrators, including the IRFU38, IRFU45, IRFU57, IRFU60HR, and IRFU65 models. This is a direct OEM replacement sourced from Wacker Neuson, ensuring correct electrical specifications and connector compatibility across the full range of 115V and 120V IRFU vibrator units it supports. Compatible models span multiple cable length configurations — 5 meter, 8 meter, and 10 meter variants — making this a widely applicable service part for contractors and concrete crews running IRFU equipment on the jobsite. Verifying your specific IRFU model number against the fitment list before ordering is always recommended to confirm the correct match.
Key Features
- Correct Electrical Specification: — Genuine OEM construction ensures the cable delivers the proper voltage and current rating required by IRFU series internal vibrators, protecting both the power supply unit and the vibrator head.
- Drop-In Connector Fit: — Designed to connect directly to the PS (power supply) unit used across IRFU38, IRFU45, IRFU57, IRFU60HR, and IRFU65 models without adapters or modifications to the existing wiring harness.
- Broad IRFU Series Coverage: — A single part number serves a wide range of IRFU 115V and 120V configurations across 5-meter, 8-meter, and 10-meter cable length variants.
- Sustained Vibrator Output: — A sound power supply cable maintains consistent energy transfer to the vibrator head, ensuring the concrete consolidation performance the IRFU series is built to deliver. A damaged or failed cable causes loss of vibration output or complete unit shutdown.
- Electrical Safety Integrity: — As a current-carrying component on a 115V/120V circuit used in wet concrete environments, replacing a worn or damaged cable with a genuine OEM part maintains proper insulation ratings and helps preserve GFCI protection on IRFU60HR models.
The power supply cable on an IRFU internal concrete vibrator is the critical link between the external power supply unit and the vibrator motor inside the needle head. It carries the electrical current that drives the eccentric motor, generating the high-frequency vibration used to consolidate fresh concrete and eliminate air pockets and voids. When the cable develops faults — whether through insulation wear, connector damage, or conductor failure — vibration output becomes inconsistent or stops entirely, directly compromising concrete quality and pour efficiency. Replacing a worn cable promptly with the correct OEM part restores full electrical continuity and keeps the vibrator operating at its intended performance level.
Part Details
| Part Number | 5100003529 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Power Supply Cable With PS And |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| IRFU45 Internal Vibrator, 115V, 1.8", 5 Meter | IRFU45/120/5 US | 5000610098 |
| IRFU38 Internal Vibrator, 115V, 1.5", 5 Meter | IRFU38/120/5 US | 5000610100 |
| IRFU57 Internal Vibrator, 115V, 2.3", 5 Meter | IRFU57/120/5 US | 5000610009 |
| IRFU65/120/5 US | IRFU65/120/5 US | 5000610106 |
| IRFU57 Internal Vibrator, 115V, 2.3", 8 Meter | IRFU57/120/8 US | 5000610269 |
| IRFU57 Internal Vibrator, 115V, 2.3", 10 Meter | IRFU57/120/10 US | 5000610270 |
| IRFU65/120/8 US | IRFU65/120/8 US | 5000610288 |
| IRFU 65, 115V, 2.6", 10 Meter | IRFU 65/120 US 10m | 5000610289 |
| IRFU60HR Internal Vibrator, 120V, 5 Meter GFCI | IRFU60/120/5hr US | 5100001343 |
| IRFU60HR Internal Vibrator, 120V, 10 Meter GFCI | IRFU60/120/10hr US | 5100001526 |
| IRFU60HR Internal Vibrator, 120V, 8 Meter GFCI | IRFU60/120/8hr US | 5100002838 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
