Wacker Neuson 5000166473 Cord Grip 1/2 LPCG 12 Plastic
Wacker Neuson

Wacker Neuson 5000166473 Cord Grip 1/2 LPCG 12 Plastic

$10.08
(No reviews yet) Write a Review
SKU:
5000166473-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Cord Grip 1/2 LPCG 12 Plastic designed for a wide range of Wacker Neuson hydronic surface heaters, ground heaters, and indirect-fired air heaters. As a factory-sourced component, part is built to the exact specifications used in original production, ensuring a correct fit across compatible E2200, E3000, E5000, HSH650, HSH700, HI260, HI750, HI900, and HI1000 series machines, as well as Pureheat and S3000 models. This cord grip is a small but essential electrical housing component that keeps wiring secured, protected, and properly sealed at panel or enclosure entry points. Sourcing the genuine OEM part means you get the right thread size, body material, and clamping range without guesswork.

Key Features

  • Genuine OEM Plastic Construction — Molded to the original thread profile and clamping specification, so the grip seats correctly against the enclosure knockout without distorting or cracking under temperature cycling common to heating equipment.
  • Correct 1/2 LPCG 12 Thread Size — Matches the half-inch knockout dimensions used across Wacker Neuson heater control enclosures, so the fitting threads in cleanly with no adapter or rework needed.
  • Broad Heater Family Coverage — Verified fitment across E2200, E3000, E3000 ES, E5000, S3000, HSH650, HSH700, HI260, HI750, HI900, HI1000, Pureheat, CH5000, BP45, and MC5200 series units.
  • Protects Wiring at Enclosure Entry — Secures and strain-relieves cables entering the control box, preventing chafing against metal edges — a common cause of insulation wear and intermittent electrical faults on heating equipment.
  • Electrical Safety at Cable Penetrations — A properly seated cord grip maintains the integrity of the enclosure seal around cable entries, helping prevent moisture ingress and accidental contact with live conductors in wet or cold-weather jobsite conditions.

A cord grip is a threaded fitting that clamps around an electrical cable where it enters a control box or enclosure, holding the cable firmly in place and protecting it from abrasion against the panel edge. On hydronic heaters and indirect-fired air heaters, control enclosures are exposed to vibration, temperature swings, and moisture — conditions that can work a loose or worn cord grip free over time. When a cord grip fails, cables can shift inside the enclosure, straining terminal connections and exposing insulation to sharp metal edges, which creates a risk of shorts and unreliable heater operation. Replacing a damaged or missing grip with the correct OEM part restores proper strain relief and keeps the electrical system operating as designed.

Part Details

Part Number5000166473
Old Part Number0166473
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionCord Grip 1/2 LPCG 12 Plastic

Compatibility & Fitment

Name Model Machine Number
E3000 Hydronic Surface Heater with generator E3000 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045
HSH700 HSH700G 5000620243
E2200 GROUND HEATER, W/ LIFT BAIL E2200 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449
E5000 GROUND HEATER, W/GAS BURNER E5000 5000620898, 5000620897, 5000620899
HI260 HEATER,OIL WITH TANK HI260 5200018503, 5200018504
BP45 Pureheat Booster Pump, 1.5hp BP45 5000620433
Pureheat Hydronic Heater, Oil Burner Pureheat 5000620245, 5000620246
E3000 ES Hydronic Surface Heater E3000ES 5000620968, 5000620967
Hydronic Surface Heater w/ Gen erator, 3000 ft hose S3000 5000620218, 5000620182
HSH650 HSH650 5000620991
Mobile Drying System MC5200 5000620201, 5000620232
HI750 DGM HEATER-INDIRECT HI750GM 5000620859, 5000620930
Mobile Indirect Fired Air Heat er, Diesel HI750D 5000620856, 5000620923, 5000620924
HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 HI750GMHD 5000620969
HI750G HEATER-INDIRECT HI750G 5000620857, 5000620928, 5000620929
HI1000 Indirect Air Heater, Diesel w/Tank HI1000 5200011232, 5200011233, 5200011231, 5100049274, 5100049273
HI1000 Indirect Air Heater, DGM, Electric Break HI1000DGM 5200011234, 5200011235, 5100049275, 5100049276
Cross Heater with oil burner CH5000 5000620240, 5000620242
HI900 Heater-DGM,Srg,-40 HI900DGM 5200014221, 5200014222, 5200014165, 5200014166
HI 900D Heater-Indirect HI900D 5200014158, 5200014159, 5200014160
Skid Indirect Air Heaters Natu ral Gas HI900G 5200014161
HI 900G Heater-Indirect,3x16 HI900 G 5200014163, 5200014164

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.