The Wacker Neuson Bearing Bolt is a genuine OEM component designed for WP1540, WP1550, WP2050, WPP1540, WPP1550, and WPU1550 series plate compactors, covering both single-direction and reversible plate models. Sourced directly from Wacker Neuson, this bearing bolt is manufactured to the exact tolerances specified for these machines, ensuring correct load transfer and bearing retention at the factory-intended specification. Compatible across a broad range of A, W, and AW-suffix variants, part number is a direct fit for the models listed below with no adaptation required.
Key Features
- OEM Precision Tolerancing — Manufactured to Wacker Neuson's exact dimensional spec, ensuring the bearing seat loads and retains correctly without play or misalignment.
- Direct Drop-In Installation — Matches the original thread pitch, shank diameter, and head geometry, so the bolt installs in the same position and torques to the same value as the factory part.
- Broad Series Coverage — Fits WP1540, WP1550, WP2050, WPP1540, WPP1550, and WPU1550 series plate compactors, including A, W, AW, and ww-suffix variants in both single-direction and reversible configurations.
- Bearing Integrity Under Load — A correctly spec'd bearing bolt keeps the exciter bearing firmly located during high-frequency vibration cycles; a loose or worn bolt allows bearing movement that accelerates wear and leads to exciter failure.
- Genuine Wacker Neuson Part — Supplied as genuine OEM, giving you full confidence that the part matches the original design intent for part number 5000402482 across all listed variants.
The bearing bolt secures the exciter bearing assembly within the plate compactor's vibration unit, holding the bearing in precise alignment as the eccentric shaft rotates at high speed to generate the compaction force. Proper clamping from this bolt is critical — if it loosens or fails, the bearing can shift under load, causing uneven wear, increased vibration beyond operating norms, and ultimately exciter damage that takes the machine out of service. Replacing a worn or damaged bearing bolt promptly with a correctly spec'd OEM part restores the mechanical integrity of the exciter assembly and protects the surrounding components.
Part Details
| Part Number | 5000402482 |
|---|---|
| Old Part Number | 0402482 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bearing Bolt |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| WPU1550A | WPU1550A | 5000630033, 5100071592 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| WP 1540W | WP1540W | 5000630018 |
| WP 1550W | WP1550W | 5000630020 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550A | WPP1550A | 5000630029 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WP 1540A | WP1540A | 5000630017 |
| WP 1550A | WP1550A | 5000630019 |
| WP 1550RAW | WP1550RAW | 5000630021 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| WPU1550AW-US | WPU1550AW-US | 5100069715 |
| WPU1550Aw | WPU1550AW | 5100071591 |
| WPU1550A-US | WPU1550A-US | 5100069716 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
