The Wacker Neuson Bolt is a genuine OEM Bolt designed for a wide range of Wacker Neuson equipment including the GV5000A and GV7000A portable generators, BFS940 and BFS914 floor saws, CT36 and CT48 walk-behind trowels, BPS2550A vibratory plates, PT3A trash pumps, and HPG50 and HPG100 vibratory truss screed power sections. As a genuine Wacker Neuson OEM part, it is manufactured to the same specification as the original hardware fitted at the factory, ensuring a direct, like-for-like replacement. Part number is confirmed across an extensive range of Wacker Neuson models, so always cross-reference your machine's model number before ordering.
Key Features
- Genuine OEM Hardware Grade — Manufactured to the exact material and thread specification of the original bolt, ensuring correct clamp load and torque retention across all listed applications.
- Direct Drop-In Replacement — Matches the original thread pitch, diameter, and head type, so it installs into existing mounting points without rework or adaptation.
- Broad Wacker Neuson Fitment — Confirmed fit across GV5000A and GV7000A generators, BFS914 and BFS940 floor saws, CT36 and CT48 walk-behind trowels, PT3A trash pumps, BPS2550A vibratory plates, and HPG truss screed power sections.
- Structural Integrity You Can Count On — A correctly specified bolt maintains the clamping force needed to keep critical assemblies secure under vibration-heavy operating conditions typical of compaction and concrete finishing equipment.
- Verified OEM Part Number — Sourced directly from Wacker Neuson and listed under part number 5100000450, eliminating guesswork when cross-referencing your parts manual.
A bolt may seem like a simple component, but in construction equipment it plays a critical structural role — holding covers, frames, engine mounts, and mechanical assemblies together under sustained vibration and load. Using a bolt with the wrong thread specification, tensile grade, or head geometry can lead to under-clamping, fastener failure, or damage to mating components over time. Replacing a worn, stripped, or lost bolt with a genuine OEM part ensures the correct clamp load is maintained and that the assembly performs as intended throughout its service life.
Part Details
| Part Number | 5100000450 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bolt |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS940 | BFS940 | 5100029229, 5100054574 |
| GV7000A | GV7000A | 5000009348, 5000009353, 5100006205 |
| GV5000A | GV5000A | 5000009346, 5000009351, 5000009361, 5100006204 |
| 50Hz Portable Value Generator | GV5003A | 5000009347, 5000009362, 5100002154 |
| 50Hz Portable Value Generator | GV7003A | 5000009349, 5000009364, 5100002155 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000006729, 5000006730, 5100058535, 5100058536 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Reversible Plates | MPU 29A | 5000630244 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
| Floor Saw | BFS 914A | 5100004002 |
| RD7Af HRC | RD7Af HRC | 5100006342 |
| RD7Afb HRC | RD7Afb HRC | 5100006347 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| BT48A | BT48A | 5100081471 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
