Wacker Neuson

Wacker Neuson 5100011910 Nonreturn Valve

$131.76
(No reviews yet) Write a Review
SKU:
5100011910-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Nonreturn Valve is a genuine OEM nonreturn valve designed for the RD24-100, RD27-120, RD40-130, and RD45-140 series tandem rollers, including standard, canopy, open-ROPS, and DPF-equipped variants. As a factory-authorized component, this part is produced to the exact specifications used in original assembly, ensuring consistent fit and hydraulic system integrity. Compatibility spans a wide range of RD-series models, making a reliable stock item for fleets running multiple roller configurations. Verify your model number against the fitment list before ordering to confirm this is the correct valve for your machine.

Key Features

  • Genuine OEM Hydraulic Precision — Manufactured to Wacker Neuson's original flow-control tolerances, ensuring the valve opens and seats correctly at the pressures your roller's hydraulic circuit demands.
  • Direct-Fit Replacement — Engineered to the same port dimensions and thread specification as the original, so installation follows the standard service procedure without additional adaptation.
  • Broad RD-Series Coverage — Fits RD24-100, RD27-120, RD40-130, and RD45-140 tandem rollers across standard, canopy (C), open-ROPS (O), and DPF model variants.
  • Protects Hydraulic Flow Direction — A correctly functioning nonreturn valve prevents backflow in the hydraulic circuit; a worn or failed valve can cause pressure loss, erratic drum drive behavior, and accelerated pump wear.
  • Fuel and Hydraulic System Safety — Maintaining correct one-way flow control in a pressurized hydraulic system is essential to safe roller operation; using the genuine OEM part ensures the valve performs within the system's rated pressure range.

A nonreturn valve — also called a check valve — allows hydraulic fluid to flow in one direction only, blocking reverse flow when pressure differentials shift within the circuit. In a tandem roller's hydraulic system, this valve protects pumps, motors, and control circuits from backpressure that could cause unintended movement or component damage. When the valve fails or begins to leak past its seat, operators typically notice sluggish or inconsistent drum drive response, and left unaddressed, the resulting backflow can place damaging load cycles on the hydraulic pump.

Part Details

Part Number5100011910
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionNonreturn Valve

Compatibility & Fitment

Name Model Machine Number
RD24-100 Tandem Roller RD24-100 5100011385
RD27-120 Tandem Roller RD27-120 5100011386
RD24-100 C Tandem Rollers RD24-100 C 5100011387
RD27-120 C Tandem Roller RD27-120 C 5100011388
RD24-100 O Tandem Roller RD24-100 O 5100011389
RD27-120 O Tandem Roller RD27-120 O 5100011390
RD40-130 Tandem Roller RD40-130 5100011391, 5100047382
RD45-140 Tandem Roller RD45-140 5100011392, 5100047383
RD40-130 C Tandem Roller RD40-130 C 5100011393
RD45-140 C Tandem Roller RD45-140 C 5100011394
RD40-130 O RD40-130 O 5100011395
RD45-140 O Tandem Roller RD45-140 O 5100011396
RD 24-100.3 RD 24-100.3 5100032197
RD27-120 RD 27-120.3 5100032198
RD24-100c.3 RD24-100c.3 5100047370
RD27-120c RD27-120c.3 5100047371
RD24-100o.3 RD24-100o.3 5100047372
RD27-120o RD27-120o.3 5100047373
RD24-100 DPF RD24-100 DPF 5100047380
RD40-130c RD40-130c 5100047384
RD45-140c RD45-140c 5100047385
RD40-130o RD40-130o 5100047386
RD45-140o RD45-140o 5100047387
RD28-120 DPF RD28-120 DPF 5100047390
RD24-100c DPF RD24-100c DPF 5100047391
RD28-120c DPF RD28-120c DPF 5100047392
RD24-100o DPF RD24-100o DPF 5100047393
RD28-120o DPF RD28-120o DPF 5100047394
RD40-130.3 RD40-130.3 5100047395
RD45-140.3 RD45-140.3 5100047396
RD40-130c.3 RD40-130c.3 5100047397
RD45-140c.3 RD45-140c.3 5100047398
RD40-130o.3 RD40-130o.3 5100047399
RD45-140o.3 RD45-140o.3 5100047400
RD40-130 DPF RD40-130 DPF 5100055777
RD45-140 DPF RD45-140 DPF 5100055778
RD40-130c DPF RD40-130c DPF 5100055779
RD45-140c DPF RD45-140c DPF 5100055780
RD40-130o DPF RD40-130o DPF 5100055781
RD45-140o DPF RD45-140o DPF 5100055782

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.