The Wacker Neuson Cable Harness Telematik is a genuine OEM component designed for the DPU80Lec, DPU90Lec, and DPU110Lec series reversible and forward plate compactors. Sourced directly from Wacker Neuson, this harness is manufactured to the exact specifications required for proper telematics system operation on your machine. Compatibility spans a broad range of models including the DPU80Lec670, DPU80Lec770, DPU90Lec670, DPU90Lec770, DPU110Lec870, DPU110Lec970, and their reversible and US-spec counterparts, as well as the DPU110Lekc970. When your telematics wiring is compromised, replacing it with the correct OEM harness ensures the system connects and communicates as intended.
Key Features
- OEM Wiring Integrity — Manufactured to Wacker Neuson's exact connector pin-out and shielding specifications, ensuring correct signal transmission throughout the telematics circuit.
- Direct Plug-In Replacement — Harness connectors match the factory routing and termination points on the DPU80Lec, DPU90Lec, and DPU110Lec series, allowing a clean, direct swap.
- Broad Model Coverage — A single part number covers standard, reversible (r), US-spec, and DPU110Lekc970 variants across the DPU80, DPU90, and DPU110 Lec compactor families.
- Telematics System Continuity — A damaged or corroded harness causes data loss, connectivity faults, or full telematics failure; this OEM replacement restores complete system function.
- Electrical Safety Compliance — Genuine OEM construction meets the insulation and current-carrying requirements of the original design, reducing the risk of shorts or fault codes caused by substandard wiring.
The cable harness telematik is the dedicated wiring assembly that connects the compactor's telematics module to the machine's electrical system, allowing data such as operating hours, location, and machine status to be monitored remotely. Without a fully intact harness, the telematics module cannot transmit or receive signals reliably, leading to incomplete fleet data, diagnostic fault codes, or a complete loss of remote monitoring capability. A worn, pinched, or corroded harness should be replaced promptly to keep telematics reporting accurate and the machine's connected-service features fully operational.
Part Details
| Part Number | 5100044787 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cable Harness Telematik |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU80Lec770 | DPU80Lec770 | 5100026787 |
| DPU110Lec870 | DPU110Lec870 | 5100026869 |
| DPU80Lec670 | DPU80Lec670 | 5100027032 |
| DPU110Lec970 | DPU110Lec970 | 5100027035 |
| DPU90Lec670 | DPU90Lec670 | 5100027534 |
| DPU90Lec770 | DPU90Lec770 | 5100027536 |
| DPU110Lec970 US | DPU110Lec970 US | 5100026784 |
| DPU80rLec670 | DPU80rLec670 | 5100027033 |
| DPU80rLec770 | DPU80rLec770 | 5100027034 |
| DPU90Lec770 US | DPU90Lec770 US | 5100028357 |
| DPU110rLec970 | DPU110rLec970 | 5100027036 |
| DPU110rLec870 | DPU110rLec870 | 5100027077 |
| DPU110rLec970 US | DPU110rLec970 US | 5100026786 |
| DPU90rLec770 US | DPU90rLec770 US | 5100028359 |
| DPU110Lekc970 | DPU110Lekc970 | 5100034515 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
