The Wacker Neuson Cable Harness is a genuine OEM component designed for the DPU80, DPU90, and DPU110 series reversible and non-reversible plate compactors. Sourced directly from Wacker Neuson, this cable harness matches the original assembly in connector layout, wire gauge, and routing path — ensuring it integrates cleanly into the machine's electrical system without adaptation. It is a direct replacement for the factory-installed harness across a broad range of Lec, Lem, and Lekc model variants, including US-specification machines. Confirm your model number against the fitment list before ordering to make sure is the correct harness for your unit.
Key Features
- OEM-Matched Wiring Configuration — Manufactured to the original circuit layout with correct connector types, wire gauges, and insulation grades for the DPU series electrical system.
- Direct Plug-In Replacement — Connectors and routing anchors match the factory harness exactly, so installation follows the original assembly sequence without cutting or splicing.
- Broad DPU Series Coverage — Fits DPU80, DPU90, and DPU110 reversible and standard plate compactors across Lec, Lem, and Lekc model families, including US-spec variants.
- Restores Full Electrical Function — A damaged or degraded harness can cause intermittent control faults, failure to start, or loss of compaction control; replacing it with the correct OEM part restores dependable machine operation.
- Electrical Safety Compliance — As a genuine Wacker Neuson part, the harness meets the original insulation and current-carrying specifications, reducing the risk of short circuits or control failures in the field.
The cable harness is the central wiring assembly that connects the machine's engine controls, start system, and operational switches into a single routed circuit. On electric-start and electronically controlled plate compactors like the DPU series, the harness carries ignition signals, sensor outputs, and control inputs that the operator relies on to run and manage the machine. When a harness degrades — through chafing, moisture ingress, or connector corrosion — the result is often erratic behavior, no-start conditions, or loss of compaction control mode, all of which take the machine out of service until the wiring is restored.
Part Details
| Part Number | 5100061282 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cable Harness |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU80Lec770 | DPU80Lec770 | 5100026787 |
| DPU110Lec870 | DPU110Lec870 | 5100026869 |
| DPU80Lec670 | DPU80Lec670 | 5100027032 |
| DPU110Lec970 | DPU110Lec970 | 5100027035 |
| DPU90Lec670 | DPU90Lec670 | 5100027534 |
| DPU90Lec770 | DPU90Lec770 | 5100027536 |
| DPU80Lem770 | DPU80Lem770 | 5100018444 |
| DPU110Lem870 | DPU110Lem870 | 5100018445 |
| DPU80Lem670 | DPU80Lem670 | 5100024695 |
| DPU110Lem970 | DPU110Lem970 | 5100024696 |
| DPU90Lem770 | DPU90Lem770 | 5100024731 |
| DPU110Lec970 US | DPU110Lec970 US | 5100026784 |
| DPU80rLec670 | DPU80rLec670 | 5100027033 |
| DPU80rLec770 | DPU80rLec770 | 5100027034 |
| DPU90Lec770 US | DPU90Lec770 US | 5100028357 |
| DPU80rLem670 | DPU80rLem670 | 5100024697 |
| DPU80rLem770 | DPU80rLem770 | 5100024698 |
| DPU110Lem970 US | DPU110Lem970 US | 5100024730 |
| DPU90Lem770 US | DPU90Lem770 US | 5100024732 |
| DPU110rLec970 | DPU110rLec970 | 5100027036 |
| DPU110rLec870 | DPU110rLec870 | 5100027077 |
| DPU90rLec770 US | DPU90rLec770 US | 5100028359 |
| DPU110rLem970 | DPU110rLem970 | 5100024699 |
| DPU110rLem870 | DPU110rLem870 | 5100026697 |
| DPU110rLec970 US | DPU110rLec970 US | 5100026786 |
| DPU90rLem770 | DPU90rLem770 US | 5100028358 |
| DPU110rLem970 US | DPU110rLem970 US | 5100026785 |
| DPU110Lekc970 | DPU110Lekc970 | 5100034515 |
| Vibration Plate DPU 80-110(r) KMAT | DPU 80/110 KMAT | 5100016604 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
