The Wacker Neuson Switch is a genuine OEM Switch designed for a broad range of Wacker Neuson heating and climate equipment, including E3000 Ground Heaters, E3000 Hydronic Surface Heaters, HI750G and HI750GM Indirect Air Heaters, HI1000 Indirect Air Heaters, HI900G Skid Indirect Air Heaters, HSH380 Hydronic Surface Heaters, E1250 Hydronic Heaters, and CUB400/CUB700 Skid Mounted Indirect Fired Air Heaters. As a genuine OEM component sourced directly from Wacker Neuson, the is built to the exact specification of the original part it replaces, ensuring correct fitment and consistent electrical operation across all compatible units. This Switch spans multiple heater families and configurations — including standard, lift bail, generator, and thermocouple variants — making it a versatile stocking part for dealers and service technicians. Verify your machine's model number and serial number against the fitment list before ordering to confirm compatibility.
Key Features
- Correct Switching Spec: — Manufactured to the original electrical rating for Wacker Neuson heating equipment, ensuring proper circuit control and consistent on/off operation.
- Genuine OEM Part: — Sourced directly from Wacker Neuson; identical in form and function to the switch installed at the factory, with no adaptation needed at installation.
- Wide Heater Family Coverage: — A single part number covers E3000 ground and hydronic heaters, HI750G/HI750GM/HI1000/HI900G indirect air heaters, HSH380 hydronic surface heaters, E1250 hydronic heaters, and CUB400/CUB700 skid-mounted heaters.
- Supports Uninterrupted Heat Output: — A functioning switch is essential for operator control of the heating cycle; a worn or failed switch can prevent the unit from starting, cycling, or shutting down correctly.
- Electrical Safety Compliance: — Using the correct OEM-rated switch on fuel-fired and electrically controlled heaters ensures the switching circuit operates within the designed voltage and current parameters, supporting safe heater operation.
A switch on a Wacker Neuson heater serves as the operator's primary point of electrical control — opening and closing the circuit that activates or deactivates the heater's ignition, blower, or pump functions depending on the unit. On indirect air heaters and hydronic ground and surface heaters, reliable switching is critical to maintaining the controlled heating cycles these machines depend on for concrete curing, ground thawing, and space heating applications. When a switch fails or becomes intermittent, the unit may not start, may not shut down on command, or may behave erratically — disrupting temperature-sensitive work and requiring prompt replacement to restore normal operation.
Part Details
| Part Number | 5000172696 |
|---|---|
| Old Part Number | 0172696 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Switch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5100025046, 5100025045 |
| Skid Mounted-Indirect Fired Ai r Heater, NG/LP | CUB700 | 5000620208 |
| Skid Mounted-Indirect Fired Ai r Heater, NG/LP | CUB400 | 5000620206 |
| HI750 DGM HEATER-INDIRECT | HI750GM | 5000620859, 5000620930 |
| HI750G HEATER-INDIRECT | HI750G | 5000620857, 5000620928, 5000620929 |
| Factory-Installed Options | Factory-Installed Options | 5200004152 |
| E 1250S Hydronic Heater, Standard, LP/NG | E1250S | 5200012354 |
| E 1250P Hydronic Heater, Premium, LP/NG | E1250P | 5200012356 |
| E 1250B Hydronic Heater, Basic, LP/NG | E1250B | 5200007613 |
| HSH 380S-Natural Gas/Propane, w/Generator | HSH380S | 5200012370 |
| HI1000 Indirect Air Heater, Gas | HI1000 | 5200011231, 5100049273 |
| HSH 380B-Natural Gas/Propane, w/o Generator | HSH380B | 5200007614 |
| Skid Indirect Air Heaters Natu ral Gas | HI900G | 5200014161 |
| HI 900G Heater-Indirect,3x16 | HI900 G | 5200014163, 5200014164 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
