The Wacker Neuson Shockmount is a genuine OEM component designed for the VP1340, VP1550, VP2050, WP1540, WP1550, AP1550, and MP15 series single-direction vibratory plate compactors. As a direct factory replacement, this shockmount meets the exact material and dimensional specifications set by Wacker Neuson for these machines. With coverage across the full VP, WP, AP, and MP15 plate families — including AW, RW, and W variants — part number is the correct shockmount for a wide range of jobsite compaction equipment. Confirm your model number before ordering to ensure proper fitment.
Key Features
- Genuine OEM Vibration Isolation: — Manufactured to Wacker Neuson's original rubber compound and hardness specification, delivering the correct damping rate for these vibratory plate compactors.
- Drop-In Replacement: — Mounts to the existing hardware points on VP, WP, AP, and MP15 series plates without rework, keeping installation straightforward in the field.
- Broad Series Compatibility: — Fits VP1340, VP1550, VP2050, WP1540, WP1550, AP1550, and MP15 families, including AW, RW, W, A, R, and Y variants, covering a wide range of Wacker Neuson single-direction compaction plates.
- Protects Operator and Machine: — A properly functioning shockmount absorbs the high-frequency exciter vibration before it reaches the handle and frame, limiting operator fatigue and protecting upper-frame components from stress cracking.
- Sustained Compaction Output: — When the shockmount is in good condition, the exciter energy stays directed into the base plate and the ground beneath it, maintaining consistent compaction force and surface quality.
A shockmount — sometimes called an anti-vibration mount or isolation mount — is a rubber-bonded isolator positioned between the exciter/baseplate assembly and the upper handle frame of a vibratory plate compactor. Its job is to absorb and dampen the high-frequency vibration generated by the exciter so that most of that energy goes into the ground rather than up through the machine's frame and handles. When a shockmount deteriorates, cracks, or separates, the operator experiences noticeably higher handle vibration, and the upper frame is exposed to stress it was not designed to sustain — which can lead to handle cracks, fastener loosening, and premature wear of adjacent components. Replacing a worn shockmount restores proper vibration isolation and keeps compaction energy focused where it belongs.
Part Details
| Part Number | 5000130000 |
|---|---|
| Old Part Number | 0130000 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shockmount |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630046 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630044 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| VP1340A VIBROPLATE | VP1340A | 5000009031, 5000630057 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| MP15 | MP15 | 5000630131, 5000630227 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| Single Direction Plates | AP1550R | 5000009538 |
| Value Vibratory Plate, 15kN, 5 00mm/19.5in | VP1550(RAW) | 5000008703, 5000630048 |
| Value Vibratory Plate, 15kN, 5 00mm/19.5in | VP2050(RAW) | 5000008704, 5000630049 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| Single Direction Plates | AP1550AW | 5000009540 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050Y | 5000009089, 5000009515, 5000009090 |
| Single Direction Plate | MP15(RAW) | 5000630245 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Single Direction Plates | AP1550A | 5000009539 |
| Soil and Asphalt Compaction | MP15A | 5000630318 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
