The Bomag 05114073 Grooved Ball Bearing is a genuine OEM component designed for Bomag BT 60, BT 65, BVT 65, BT 60 G, BT 65 G, BT 50, and BT 60 e tampers. Sourced directly from Bomag, this bearing meets the same precision tolerancing standards as the original part installed at the factory. This grooved ball bearing drops into place using the original mounting configuration, requiring no special adaptation. If your tamper is showing signs of increased vibration, unusual noise, or sluggish ram action, a worn bearing is often the cause — replacing it with an authentic OEM part restores smooth, consistent operation.
Key Features
- OEM Precision Tolerancing — manufactured to Bomag's exact bore, outer diameter, and radial clearance specifications, ensuring the bearing seats correctly and handles the cyclic load demands of a vibratory tamper
- Direct-Fit Replacement — matches the original bearing geometry and mounting interface across the full range of compatible tamper models, sliding into position without rework or shimming
- Broad Tamper Coverage — confirmed fitment for the BT 50, BT 60, BT 60 e, BT 60 G, BT 65, BT 65 G, and BVT 65, covering multiple generations of Bomag's tamper lineup
- Smooth Ram Action Restored — a correctly functioning grooved ball bearing allows the tamper's drive mechanism to rotate freely and transfer energy efficiently to the foot; a worn bearing causes vibration, heat buildup, and uneven compaction force
- Genuine Bomag OEM Part — supplied under part number 05114073, this is an authentic Bomag component backed by OEM traceability, not a substitute or approximation
A grooved ball bearing — also called a deep-groove ball bearing — supports rotating shafts inside the tamper's drive assembly, reducing friction and allowing the crankshaft or eccentric mechanism to spin smoothly under load. In a vibratory tamper, this bearing absorbs both radial and light axial forces generated by the rapid up-and-down ram cycle. When the bearing wears out, internal clearances increase, causing audible rumbling or grinding, excess heat, and eventually accelerated wear on surrounding drive components. Replacing a failed bearing promptly with a properly rated OEM unit keeps the drive mechanism aligned and the tamper delivering consistent compaction energy with every stroke.
Part Details
| Part Number | 05114073 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Grooved Ball Bearing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tamper | BT 60 | 00800853, 00818673, 00824399, 00824635, 00825059, 00825397, 00825399, 00825573, 00825575, 00826683, 00826853, 00826877, 00826879, 00825035 |
| Tamper | BT 65 | 00818675, 00824403, 00824637, 00824885, 00825061, 00825213, 00825401, 00825403, 00825579, 00825581, 00826537, 00826833, 00826881, 00826883, 00827317 |
| Tamper | BVT 65 | 00818677, 00824401, 00825153, 00825405, 00825577 |
| Tamper | BT 60 G | 00824891, 00825407, 00825113 |
| Tamper | BT 65 G | 00824893, 00825115, 00825409 |
| Tamper | BT 50 | 00826373, 00826875 |
| Tamper | BT 60 e | 00826577 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
