The Bomag 05755546 Central Plug Connector is a genuine OEM electrical component designed for a broad range of Bomag cold milling machines, pavers, tandem rollers, walk-behind rollers, and pneumatic tyred rollers. As an authentic Bomag part, it meets the same exacting standards as the original component installed at the factory, ensuring correct electrical interface and signal integrity across the machine's wiring harness. This connector fits equipment including the BM 2000/60, BM 1300/30, BF 600 P HCE, BF 691 C, BW 90 AD-2, BW 184 AD, BW 24 R, BW 65 S-2, and C 560 B, among others covered in the full fitment list. Sourcing part number 05755546 directly through DHS Equipment means you receive a verified OEM component matched to your machine's electrical system.
Key Features
- Genuine OEM Electrical Integrity — Manufactured to Bomag's original connector specification, delivering correct pin configuration, contact plating, and housing grade for dependable signal and power transfer in demanding compaction and paving environments.
- Direct-Fit Replacement — Engineered to plug directly into the factory wiring harness with no splicing, adapter, or rewiring — keeping installation straightforward and connection points secure.
- Wide Equipment Coverage — Fits Bomag BM-series cold milling machines, BF-series pavers, BW tandem rollers, BW walk-behind rollers, and BW pneumatic tyred rollers, including the BM 2000/60, BM 1200/30, BF 600 C-E, BF 691 C-HSE, BW 100 ADM-2, BW 80 ADS, and BW 24 R.
- Protects Control System Reliability — A failed or corroded central plug connector can disrupt communication between electronic control units, sensors, and actuators, causing erratic machine behavior or complete control loss — this replacement restores full circuit continuity.
- Electrical Safety Compliance — Using the correct OEM connector ensures proper sealing class, current rating, and insulation material, reducing the risk of arcing, shorts, or moisture ingress in the machine's primary electrical circuit.
The central plug connector serves as a primary multi-pin junction point in the machine's electrical harness, consolidating and routing power and data signals between major control modules, sensors, and actuators. When this connector degrades — through corrosion, cracked housing, or pin damage — the result can range from intermittent sensor faults and control panel errors to complete loss of system communication, halting machine operation. Replacing it with a genuine Bomag part ensures the wiring harness is restored to its designed electrical specification, with secure locking, correct contact resistance, and appropriate environmental sealing for field conditions.
Part Details
| Part Number | 05755546 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Central Plug Connector |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Cold Milling Machine | BM2000/50 | 00800629 |
| Paver | BF 600 P HCE | 00800631, 00800721 |
| Paver | BF 600 P HCG | 00800641 |
| Paver | BF 600 P HSE | 00800645 |
| Paver | BF 600 C-E | 00800651 |
| Paver | BF 600 P-E | 00800653 |
| Paver | BF 600 C-G | 00800655 |
| Paver | BF 691 C | 00800661 |
| Cold Milling Machine | BM1000/30-2 | 00800665 |
| Cold Milling Machine | BM1000 30-2 | 00800667 |
| Cold Milling Machine | BM1200 30-2 | 00800669, 00800671 |
| Cold Milling Machine | BM1300/30-2 | 00800673 |
| Cold Milling Machine | BM1300 30-2 | 00800675 |
| Paver | BF 691 C-HSE | 00800689 |
| Paver | BF 691 P-HSE | 00800691 |
| Cold Milling Machine | BM 2000/60-2 | 00800693, 00800695 |
| Paver | BF 691 C-HB | 00800703 |
| Paver | BF 691P-HSE | 00800705 |
| Paver | BF 600P HSE | 00800719, 00800727, 00824239 |
| Paver | BF 600C HCE | 00800725, 00800733 |
| Paver | BF 600P HCE | 00800729 |
| Paver | BF 600C HSE | 00800731 |
| Tandem Roller | BW 90 AD-2 | 00810281, 00817569 |
| Tandem Roller | BW 184 AD | 00810713 |
| Tandem Roller | BW 100 ADM-2 | 00817459 |
| Pneumatic Tyred Roller | BW 24 R | 00817552 |
| Walk-Behind / Light Roller | BW 65 S-2 | 00817560, 00818069 |
| Walk-Behind / Light Roller | BW 75 AD-2 | 00817563, 00811410 |
| Walk-Behind / Light Roller | BW 75 S-2 | 00817565, 00818077, 00811409 |
| Tandem Roller | BW 80 AD-2 | 00817566 |
| Tandem Roller | BW 80 ADS | 00817567 |
| Tandem Roller | BW 90 AC-2 | 00817568 |
| Pneumatic Tyred Roller | C 560 B | 00817598 |
| Cold Milling Machine | BM1300/30-T3 | 00818425 |
| Cold Milling Machine | BM1200/30-T3 | 00818427 |
| Cold Milling Machine | BM 1200/30 | 00824963 |
| Cold Milling Machine | BM 1300/30 | 00824965, 00825095 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
