The Bomag 05755547 Central Plug Connector is a genuine OEM electrical connector designed for a wide range of Bomag cold milling machines, pavers, and rollers, including BM-series cold milling machines, BF-series pavers, and BW-series rollers. Sourced directly from Bomag, this connector matches the original component in form, fit, and electrical specification — ensuring a proper connection without adaptation or guesswork. This part is confirmed compatible with models including the BM 2000/60, BM 1300/30, BF 600 P HCE, BF 691 C, BW 80 AD-2, BW 90 AD-2, BW 24 R, BW 65 S-2, and more. When an electrical connector fails or corrodes, it can disrupt control signals across the machine's harness — replacing it with the correct OEM part restores stable, uninterrupted electrical communication.
Key Features
- OEM Electrical Spec Match — Manufactured to Bomag's exact pin configuration, contact rating, and housing tolerances, ensuring correct signal transmission without resistance variance or fitment gaps.
- Plug-and-Play Replacement — Designed to mate directly with the existing harness connector on compatible machines, so installation is straightforward for any qualified technician.
- Broad Equipment Coverage — Fits Bomag cold milling machines including the BM 2000/60, BM 1300/30, and BM 1200/30; pavers including the BF 600 and BF 691 C series; and rollers including tandem, walk-behind, and pneumatic tyred models such as the BW 80 AD-2, BW 90 AD-2, BW 75 AD-2, and BW 24 R.
- Corrosion-Resistant Housing — The connector housing and contacts are built to withstand the vibration, moisture, and dust exposure typical of active construction environments, extending service life at the connection point.
- Electrical System Integrity — A failed or corroded central plug connector can interrupt critical control circuits, triggering fault codes or disabling machine functions; replacing it promptly with part number 05755547 restores full system continuity.
The central plug connector serves as a primary junction point in the machine's electrical harness, consolidating multiple circuit connections into a single secure interface. It allows control signals and power to pass reliably between subsystems — such as the engine management unit, hydraulic controls, and operator console — without signal loss or cross-circuit interference. When the connector degrades through corrosion, vibration damage, or worn contacts, electrical faults can appear anywhere downstream, making replacement with a correctly specified OEM connector the most direct path to restoring normal operation.
Part Details
| Part Number | 05755547 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Central Plug Connector |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Cold Milling Machine | BM2000/50 | 00800629 |
| Paver | BF 600 P HCE | 00800631, 00800721 |
| Paver | BF 600 P HCG | 00800641 |
| Paver | BF 600 P HSE | 00800645 |
| Paver | BF 600 C-E | 00800651 |
| Paver | BF 600 P-E | 00800653 |
| Paver | BF 600 C-G | 00800655 |
| Paver | BF 691 C | 00800661 |
| Cold Milling Machine | BM1000/30-2 | 00800665 |
| Cold Milling Machine | BM1000 30-2 | 00800667 |
| Cold Milling Machine | BM1200 30-2 | 00800669, 00800671 |
| Cold Milling Machine | BM1300/30-2 | 00800673 |
| Cold Milling Machine | BM1300 30-2 | 00800675 |
| Paver | BF 691 C-HSE | 00800689 |
| Paver | BF 691 P-HSE | 00800691 |
| Cold Milling Machine | BM 2000/60-2 | 00800693, 00800695 |
| Paver | BF 691 C-HB | 00800703 |
| Paver | BF 691P-HSE | 00800705 |
| Paver | BF 600P HSE | 00800719, 00800727, 00824239 |
| Paver | BF 600C HCE | 00800725, 00800733 |
| Paver | BF 600P HCE | 00800729 |
| Paver | BF 600C HSE | 00800731 |
| Tandem Roller | BW 80 AD-2 | 00810280, 00817566 |
| Tandem Roller | BW 90 AD-2 | 00810281, 00817569 |
| Tandem Roller | BW 184 AD | 00810713 |
| Tandem Roller | BW 100 ADM-2 | 00817459 |
| Pneumatic Tyred Roller | BW 24 R | 00817552 |
| Walk-Behind / Light Roller | BW 65 S-2 | 00817560, 00818069 |
| Walk-Behind / Light Roller | BW 75 AD-2 | 00817563, 00811410 |
| Walk-Behind / Light Roller | BW 75 S-2 | 00817565, 00818077, 00811409 |
| Tandem Roller | BW 80 ADS | 00817567 |
| Tandem Roller | BW 90 AC-2 | 00817568 |
| Pneumatic Tyred Roller | C 560 B | 00817598 |
| Cold Milling Machine | BM1300/30-T3 | 00818425 |
| Cold Milling Machine | BM1200/30-T3 | 00818427 |
| Cold Milling Machine | BM 1200/30 | 00824963 |
| Cold Milling Machine | BM 1300/30 | 00824965, 00825095 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
