The Bomag 92101282 Control Block is a genuine OEM hydraulic control block designed for Bomag tandem rollers across the BW 141, BW 151, BW 154, BW 161, BW 190, BW 191, BW 202, and BW 206 series, including models BW 141 AD-5, BW 151 AD-5, BW 154 AD-5, BW 151 AD-5 AM, BW 151 AC-5, BW 141 AD-50. Sourced directly from Bomag, this part carries the same specifications and tolerances as the original component fitted at the factory. Confirmed fitment spans the full range of AD-5, AD-50, ADO-5, ADO-50, AC-5, and AC-50 tandem roller variants listed for part number 92101282, so you can order with confidence that this control block matches your machine's hydraulic circuit exactly.
Key Features
- Genuine OEM Hydraulic Specification — manufactured to Bomag's exact flow-path and pressure ratings for tandem roller hydraulic systems, ensuring the control block performs at the same level as the original unit it replaces
- Direct Bolt-In Replacement — ported and threaded to match the original mounting interface, allowing this control block to connect to existing hydraulic lines and brackets without rework
- Broad Tandem Roller Coverage — fits BW 141, BW 151, BW 154, BW 161, BW 190, BW 191, BW 202, and BW 206 tandem rollers across AD-5, AD-50, ADO-5, ADO-50, AC-5, and AC-50 variants, including the BW 151 AD-5 AM and BW 206 AD-5 AM
- Restored Drum and Drive Control — a correctly functioning control block maintains precise hydraulic pressure distribution to the roller's drums and drive circuits; a failed or leaking block causes erratic drum behavior, loss of vibration control, and uneven compaction results
- Hydraulic Integrity Under Load — machined to resist internal leakage and seal-seat wear under the continuous high-pressure cycling typical of asphalt compaction work, supporting consistent output across long paving shifts
The control block is a valved hydraulic manifold that directs pressurized fluid to the correct circuits within the roller's hydraulic system — governing functions such as drum drive, vibration activation, and steering response. When the control block is worn, cracked, or internally bypassing fluid, the operator loses precise command over drum behavior, which leads to inconsistent mat density and potential surface defects on the finished asphalt layer. Replacing a failed control block with a genuine Bomag unit restores full hydraulic authority and brings the roller's compaction performance back to specification.
Part Details
| Part Number | 92101282 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Control Block |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tandem Roller | BW 141 AD-5 | 00824049 |
| Tandem Roller | BW 151 AD-5 | 00824051 |
| Tandem Roller | BW 154 AD-5 | 00824053 |
| Tandem Roller | BW 151 AD-5 AM | 00824055 |
| Tandem Roller | BW 151 AC-5 | 00824057 |
| Tandem Roller | BW 141 AD-50 | 00824059 |
| Tandem Roller | BW 161 AD-5 | 00824103, 00824647, 00824945 |
| Tandem Roller | BW 161 AD-50 | 00824111 |
| Tandem Roller | BW 202 AD-50 | 00824113 |
| Tandem Roller | BW 191 AD-5 | 00824281 |
| Tandem Roller | BW 206 AD-5 | 00824283 |
| Tandem Roller | BW 206 AD-5 AM | 00824287 |
| Tandem Roller | BW 206 AD-50 | 00824289 |
| Tandem Roller | BW 161 ADO-5 | 00824359, 00824657, 00824947 |
| Tandem Roller | BW 190 AD-5 | 00824361, 00824603, 00824651 |
| Tandem Roller | BW 190 ADO-5 | 00824363, 00824661, 00824949 |
| Tandem Roller | BW 161 ADO-50 | 00824417 |
| Tandem Roller | BW 202 ADO-50 | 00824419 |
| Tandem Roller | BW 151 AC-50 | 00824503 |
| Tandem Roller | BW 151 AD-50 | 00824567 |
| Tandem Roller | BW 191 ADO-5 | 00824599 |
| Tandem Roller | BW 206 ADO-5 | 00824601 |
| Tandem Roller | BW 202 AD-5 | 00824649 |
| Tandem Roller | BW 161 AC-5 | 00824655 |
| Tandem Roller | BW 161 AC-50 | 00824853 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
