The Bomag 07320830 Countersunk Screw is a genuine OEM fastener designed for a wide range of Bomag equipment, including BT-series tampers, BW tandem rollers, BW pneumatic tyred rollers, BM cold milling machines, MPH and RS recycler/stabilizers, and the BP 10/36-2E vibratory plate. Sourced directly from Bomag, this countersunk screw matches the original specification for a flush, secure installation with no guesswork. Confirmed fitment spans dozens of models, from compact tampers like the BT 50, BT 60, and BT 65 to large tandem rollers including the BW 202 AD-4 and BW 203 AD-4, cold milling machines such as the BM 500/15 and BM 2500/75, and recyclers/stabilizers including the MPH 600 and RS 650. When you need an exact-match replacement, ordering by part number 07320830 ensures you receive the correct fastener for your machine.
Key Features
- Genuine OEM Fastener Integrity — manufactured to Bomag's original material grade and thread specification, so the screw seats flush and holds torque the way the original design requires
- Flush-Mount Countersunk Profile — the countersunk head sits fully recessed in the mating surface, eliminating protrusion that could cause interference or vibration-induced loosening in service
- Broad Cross-Family Fitment — a single part number 07320830 covers BT-series tampers, BW tandem and pneumatic tyred rollers, BM cold milling machines, MPH and RS recycler/stabilizers, and the BP 10/36-2E vibratory plate
- Correct Thread Engagement — OEM dimensioning ensures full thread engagement in the host assembly, maintaining clamping force under the continuous vibration loads common to compaction and milling equipment
- Direct Drop-In Replacement — matches the original fastener geometry precisely, so this screw installs using standard tooling with no rework to the mounting hole or mating component
A countersunk screw is a flush-head fastener used to secure panels, guards, covers, and structural sub-assemblies in place while keeping the fastener head level with or below the surrounding surface. This profile is critical on compaction and milling equipment, where a proud fastener head can snag on material, create stress concentrations, or interfere with adjacent moving parts. When a countersunk screw is missing, stripped, or replaced with an incorrect size, the clamped joint loses holding strength, components can shift under vibration, and surrounding material may crack or wear prematurely — making an exact OEM replacement the straightforward and reliable choice.
Part Details
| Part Number | 07320830 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Countersunk Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tamper | BT 60 | 00800853, 00813225, 00813226, 00817451, 00818673, 00824399, 00824635, 00825059, 00825397, 00825399, 00825573, 00825575, 00826683, 00826853, 00826877, 00826879, 00825035 |
| Tamper | BT 58 | 00813209, 00813216, 00811598, 00813217, 00813214, 00813218, 00813219, 00813221, 00811613 |
| Tamper | BT 50 | 00817449, 00826373, 00826875, 00813203, 00813205 |
| Tamper | BT 65 | 00817452, 00818675, 00824403, 00824637, 00824885, 00825061, 00825213, 00825401, 00825403, 00825579, 00825581, 00826537, 00826833, 00826881, 00826883, 00827317, 00813230, 00813231 |
| Tamper | BT 65/4 | 00817453, 00818017, 00818199, 00818601, 00818739, 00818785, 00818833, 00824171, 00824343 |
| Tamper | BT 75 | 00817454, 00813235, 00811620 |
| Tamper | BT 80 D | 00817455, 00818735, 00825495, 00811621 |
| Tamper | BT 60/4 | 00817456, 00817997, 00818197, 00818629, 00818737, 00818783, 00818827, 00824169 |
| Tandem Roller | BW 161 AD-4 | 00817641, 00818481, 00818959, 00824003 |
| Tandem Roller | BW 202 AD-4 | 00817642, 00818381, 00824005 |
| Tandem Roller | BW 141 AD-4 | 00817697, 00818561, 00818955, 00818999 |
| Tandem Roller | BW 154 AD-4 AM | 00817699, 00818447 |
| Tandem Roller | BW 161 ADH-4 | 00817739 |
| Pneumatic Tyred Roller | BW 24 RH | 00817755, 00818457, 00818951 |
| Pneumatic Tyred Roller | BW 27 RH | 00817757, 00818315, 00818953, 00818997 |
| Tandem Roller | BW 190 AD-4 | 00817823, 00818379, 00824009 |
| Tandem Roller | BW 190 AD-4 AM | 00817825, 00818309, 00824021 |
| Tandem Roller | BW 203 AD-4 AM | 00817837, 00818591, 00824019 |
| Tandem Roller | BW151AD 4 | 00817843 |
| Vibratory Plate | BP 10/36-2E | 00817847 |
| Tandem Roller | BW 154 AD-4 | 00817901, 00818557 |
| Tandem Roller | BW 151 AD-4 AM | 00817913, 00818555, 00824017 |
| Tandem Roller | BW 141 AD-4 AM | 00817925, 00818553 |
| Tandem Roller | BW 161 AC-4 | 00817947, 00818589, 00818967 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873 |
| Pneumatic Tyred Roller | BW24RH | 00818279, 00818691 |
| Single Drum Roller | BW177PDH 5 | 00818281 |
| Tandem Roller | BW 154 AP-4 AM | 00818299 |
| Tandem Roller | BW 154 AP-4 | 00818301 |
| Tandem Roller | BW 154 ACP-4 AM | 00818303 |
| Tandem Roller | BW 154 ACP-4 | 00818305 |
| Pneumatic Tyred Roller | BW 25 RH | 00818321 |
| Tandem Roller | BW 174 AP-AM | 00818343, 00818537 |
| Tandem Roller | BW 174 ACP-AM | 00818355, 00818535 |
| Tandem Roller | BW 161 ADH-4 CHINA | 00818365 |
| Tandem Roller | BW 174 AP | 00818395, 00818517 |
| Tandem Roller | BW 170 AP AM | 00818515 |
| Tandem Roller | BW 174 ACP | 00818519 |
| Tandem Roller | BW 151 AC-4 AM | 00818559, 00824025 |
| Tandem Roller | BW 151 AD-4 | 00818563, 00818957, 00824001 |
| Tandem Roller | BW 151 AC-4 | 00818565, 00824011 |
| Tandem Roller | BW 203 AD-4 | 00818599, 00818963 |
| Tandem Roller | BW 174 AP-4 AM | 00818655, 00818845 |
| Tandem Roller | BW 174 AP-4 | 00818657, 00818847 |
| Tamper | BVT 65 | 00818677, 00824401, 00825153, 00825405, 00825577 |
| Tandem Roller | BW 174 AP-4 AM PB | 00818971 |
| Tandem Roller | BW 174 AP-4 PB | 00818973 |
| Tandem Roller | BW 141 AD-5 | 00824049 |
| Tandem Roller | BW 154 AD-5 | 00824053 |
| Tandem Roller | BW 151 AD-5 AM | 00824055 |
| Tandem Roller | BW 141 AD-50 | 00824059 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Tamper | BT 60 G | 00824891, 00825407, 00825113 |
| Tamper | BT 65 G | 00824893, 00825115, 00825409 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Cold Milling Machine | BM 2000/75 TE | 00825881 |
| Cold Milling Machine | BM 500/15 Stage V | 00825885 |
| Cold Milling Machine | BM 600/15 Stage V | 00825887 |
| Cold Milling Machine | BM 2500/75 | 00826375 |
| Cold Milling Machine | BM 500/15-2 | 00826459 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Cold Milling Machine | BM 600/15-2 | 00826479 |
| Tamper | BT 60 e | 00826577 |
| Tamper | BT 50 Typ2 | 00813204, 00811618 |
| Tamper | BT 55 | 00813240, 00811617, 00817450 |
| Tamper | BT 68 | 00811597, 00811599, 00811609, 00811610, 00811611, 00811612, 00811614, 00811615 |
| Tamper | BT 70 | 00813206, 00811623 |
| Tamper | BT 80 D - Torso | 00811622 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
