The Bomag 07321008 Countersunk Screw is a genuine OEM fastener designed for a wide range of Bomag single drum rollers, walk-behind rollers, pneumatic tyred rollers, recyclers/stabilizers, trench compactors, and cold milling machines. As a direct OEM replacement, this countersunk screw meets Bomag's original design specifications, ensuring a correct and secure fit without adaptation. Confirmed fitment includes BW-series single drum rollers such as the BW 145 D-5, BW 177 D-5, BW 211 D-5, BW 213 D-5, BW 216 D-5, BW 219 D-5, and BW 226 DH-4, as well as MPH-series and RS-series recyclers/stabilizers, BM-series cold milling machines including the BM 500/15 and BM 600/15, the BMP 851 trench compactor, the BW 11 RH-5 pneumatic tyred roller, and BW 75 S and BW 90 S walk-behind rollers. Sourcing part number 07321008 directly ensures you receive the authentic hardware specified for these machines.
Key Features
- Genuine OEM Fastener Grade — manufactured to Bomag's original thread profile, head geometry, and material specification, so clamping force and corrosion resistance match what left the factory
- Flush-Mount Countersunk Head — the angled head seats fully into countersunk bores, eliminating proud hardware that can snag covers, panels, or moving components
- Broad Cross-Fleet Coverage — a single part number 07321008 spans BW-series single drum rollers, MPH and RS recyclers/stabilizers, BM cold milling machines, the BMP 851 trench compactor, BW walk-behind and pneumatic tyred rollers, streamlining your parts inventory
- Structural Integrity Where It Counts — a loose or wrong-spec screw in a panel, guard, or structural joint can lead to component movement, vibration damage, or premature wear; this OEM fastener holds rated torque and stays seated through demanding compaction and milling cycles
- Direct OEM Replacement — the thread size, head angle, and length match the original Bomag specification, so this countersunk screw installs using standard tooling with no rework to the mating hole
A countersunk screw is a threaded fastener with a tapered, flat-topped head designed to sit flush with or below the surface of the material it secures. In heavy construction equipment like Bomag rollers, recyclers, and cold milling machines, these screws are commonly used to secure guards, access panels, wear plates, and structural covers where a protruding fastener head would interfere with clearances or create a snagging hazard. When a countersunk screw loosens, shears, or is replaced with an incorrect size, the assembly it holds can shift under vibration, accelerating wear on surrounding components and potentially exposing internal systems to contamination or damage.
Part Details
| Part Number | 07321008 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Countersunk Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Recycler / Stabilizer | MPH 121 | 00817587 |
| Recycler / Stabilizer | MPH 122 | 00817595 |
| Single Drum Roller | BW 226 DH-4 | 00817819 |
| Trench Compactor | BMP 851 | 00817959, 00818499 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873, 00824553 |
| Recycler / Stabilizer | MPH 122-2 | 00818177, 00818727, 00818911, 00824987 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Single Drum Roller | BW 177 D-5 | 00824351, 00824913, 00824915, 00825433, 00825725, 00825839, 00826625, 00826773 |
| Single Drum Roller | BW 145 D-5 | 00824357, 00825003, 00825427, 00825837, 00826053, 00826623, 00826771 |
| Single Drum Roller | BW 145 DH-5 | 00824471, 00825721 |
| Single Drum Roller | BW 145 PDH-5 | 00824473, 00825723 |
| Single Drum Roller | BW 177 DH-5 | 00824475, 00824917, 00825435, 00825727 |
| Single Drum Roller | BW 177 PDH-5 | 00824477, 00825437, 00825729 |
| Single Drum Roller | BW 177BVC-5 | 00824479 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Single Drum Roller | BW 211 D-5 | 00824571, 00824859, 00825241, 00826057, 00826575, 00826929, 00826931 |
| Single Drum Roller | BW 211 DH-5 | 00824573, 00826559, 00826905 |
| Single Drum Roller | BW 213 DH-5 | 00824575, 00824863, 00825983 |
| Single Drum Roller | BW 213 | 00824577, 00825991 |
| Single Drum Roller | BW 216 D-5 | 00824579, 00824869, 00825277, 00825993 |
| Single Drum Roller | BW 219 DH-5 | 00824581, 00824875, 00825223, 00825701, 00825851 |
| Single Drum Roller | BW 226-5 | 00824583, 00824883, 00825717 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Single Drum Roller | BW 211 PDH-5 | 00824725, 00826563 |
| Single Drum Roller | BW 212 DH-5 | 00824727, 00826913 |
| Single Drum Roller | BW213DH P-5 | 00824729, 00825989 |
| Single Drum Roller | BW 213 PDH-5 | 00824731, 00825275, 00825985 |
| Single Drum Roller | BW 213-5 | 00824733, 00824867, 00825987 |
| Cold Milling Machine | BM 500 15 P8 | 00824743 |
| Cold Milling Machine | BM600 /15 | 00824745 |
| Pneumatic Tyred Roller | BW 11 RH-5 | 00824749, 00824939, 00824993, 00825667 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824753, 00824755 |
| Single Drum Roller | BW 213 D-5 | 00824761, 00824861, 00825271, 00826071, 00826917 |
| Recycler / Stabilizer | RS 460 | 00824809, 00825187, 00825189 |
| Single Drum Roller | BW 212 D-5 | 00824811 |
| Single Drum Roller | BW 214 D-5 | 00824813, 00826359 |
| Single Drum Roller | BW 226 DH-5 | 00824815, 00824881 |
| Single Drum Roller | BW 226 DI-5 | 00824817, 00824975, 00825711 |
| Single Drum Roller | BW 226 RC-5 | 00824819 |
| Single Drum Roller | BW 216 DH-5 | 00824825, 00825997 |
| Single Drum Roller | BW 216 PDH-5 | 00824827 |
| Single Drum Roller | BW 219 D-5 | 00824829, 00824873, 00825219, 00825699, 00825849 |
| Single Drum Roller | BW 219-5 | 00824831, 00826787 |
| Single Drum Roller | BW 211 PD-5 | 00824841, 00825269, 00826561 |
| Single Drum Roller | BW 216 PD-5 | 00824845, 00824871 |
| Single Drum Roller | BW 219 PDH-5 | 00824849, 00824879, 00825705, 00825853 |
| Single Drum Roller | BW 226 PDH-5 | 00824851, 00825057, 00825229 |
| Single Drum Roller | BW 219 PD-5 | 00824877, 00825703 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Cold Milling Machine | BM 600/15 EU-Flex T4i | 00825065 |
| Single Drum Roller | BW 124 PDH-5 | 00825071, 00825075, 00825625, 00825735 |
| Single Drum Roller | BW 124 DH-5 | 00825073, 00825193, 00825623, 00825733 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Recycler / Stabilizer | RS460 STAGE V | 00825263 |
| Single Drum Roller | BW 177-5 | 00825731 |
| Cold Milling Machine | BM 500/15 Stage V | 00825885 |
| Cold Milling Machine | BM 600/15 Stage V | 00825887 |
| Single Drum Roller | BW 211 D-5 SL | 00826379, 00826703, 00826825 |
| Single Drum Roller | BW 213 D-5 SL | 00826383, 00826827 |
| Cold Milling Machine | BM 500/15-2 | 00826459 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Cold Milling Machine | BM 600/15-2 | 00826479 |
| Single Drum Roller | BW 226-5 CL | 00826805 |
| Single Drum Roller | BW 145 D-5 PL | 00827061, 00827069 |
| Single Drum Roller | BW 177 PDH-5 PL | 00827075 |
| Single Drum Roller | BW 177 DH-5 PL | 00827077, 00827377 |
| Single Drum Roller | BW 177 D-5 PL | 00827081, 00827083, 00827087, 00827375 |
| Single Drum Roller | BW 213 D-5 PL | 00827113 |
| Single Drum Roller | BW 211 D-5 PL | 00827237, 00827249 |
| Single Drum Roller | BW 211 DH-5 PL | 00827239, 00827251 |
| Single Drum Roller | BW 211 PD-5 PL | 00827241 |
| Single Drum Roller | BW 211 PDH-5 PL | 00827243 |
| Single Drum Roller | BW 212 DH-5 PL | 00827259 |
| Single Drum Roller | BW 213-5 PL | 00827273 |
| Single Drum Roller | BW 213 DH | 00827275 |
| Single Drum Roller | BW 213 DH-5 PL | 00827277 |
| Single Drum Roller | BW 213 PDH-5 PL | 00827279 |
| Single Drum Roller | BW 216 D-5 PL | 00827281 |
| Single Drum Roller | BW 216 PDH-5 PL | 00827287 |
| Single Drum Roller | BW 219 D-5 PL | 00827291 |
| Walk-Behind / Light Roller | BW 75 S | 00810014 |
| Walk-Behind / Light Roller | BW 90 S | 00810016 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
