The Bomag 05545428 Cutting Ring is a genuine OEM component designed for a wide range of Bomag heavy equipment, including BC-series refuse and landfill compactors, BM cold milling machines, BW pneumatic tyred rollers, MPH and BS recycler/stabilizers, and RS stabilizers. Sourced directly from Bomag, this cutting ring delivers an exact OEM fit with no guesswork on compatibility. It is confirmed for machines including the BC 972 RB, BC 1172 RB-4, BM 2000/60-2, BM 2200/75, BW 27 RH-4i, MPH 600, BS 12000 Profi, RS 500, RS 650, and the BW 75 E walk-behind light roller, among others. When you need a direct, part-for-part replacement, the Bomag 05545428 is the correct choice for your machine.
Key Features
- Genuine OEM Cutting Precision — manufactured to Bomag's original specification, ensuring the cutting edge geometry matches the performance demands of refuse compaction, cold milling, and soil stabilization applications
- Direct OEM Replacement — matches the original mounting interface and dimensions of part number 05545428, dropping straight into place on supported machines without rework
- Broad Fleet Coverage — fits BC refuse/landfill compactors (including BC 670 RB through BC 1172 RB-4 variants), BM 2000/60, BM 2000/60-2, BM 2000/75, and BM 2200/75 cold milling machines, BW 24 RH, BW 25 RH, and BW 27 RH pneumatic tyred rollers, MPH 125, MPH 600, BS 12000, BS 16000 Profi, RS 460, RS 500, and RS 650 recycler/stabilizers, and the BW 75 E light roller
- Wear Resistance Where It Counts — a properly functioning cutting ring maintains clean, consistent cutting or compaction action; a worn or cracked ring leads to uneven material engagement and accelerated damage to surrounding components
- Fuel System and Structural Integrity — on compactor and milling applications, maintaining a correctly seated cutting ring is essential to safe, controlled material processing and preventing unplanned component failure
A cutting ring serves as a hardened wear interface at the point of material contact — whether shearing compacted refuse on a landfill compactor, engaging asphalt on a cold milling drum, or supporting ground contact on a pneumatic tyred roller. It absorbs the direct impact and abrasion that would otherwise damage more costly structural components. When a cutting ring wears thin, becomes cracked, or loses its seating, the machine loses cutting efficiency, material engagement becomes inconsistent, and surrounding assemblies are put under abnormal stress — making timely replacement critical to keeping the equipment performing as intended.
Part Details
| Part Number | 05545428 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Cutting Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Cold Milling Machine | BM 2000/60-2 | 00800693 |
| Refuse / Landfill Compactor | BC 670 RB | 00816001, 00816002, 00816003, 00816004 |
| Refuse / Landfill Compactor | BC 570 RB | 00816007 |
| Refuse / Landfill Compactor | BC 672 RB | 00816008, 00817909 |
| Refuse / Landfill Compactor | BC 771 RB | 00816025, 00817403 |
| Refuse / Landfill Compactor | BC 571 RB | 00816033, 00817400 |
| Refuse / Landfill Compactor | BC 671 RS | 00816304, 00817402 |
| Refuse / Landfill Compactor | BC 671 RB | 00817401 |
| Refuse / Landfill Compactor | BC 771 RS | 00817405 |
| Refuse / Landfill Compactor | BC 772 RB | 00817406 |
| Refuse / Landfill Compactor | BC 772 RS | 00817407 |
| Refuse / Landfill Compactor | BC 972 RB | 00817408 |
| Pneumatic Tyred Roller | BW 24 RH | 00817755, 00818457, 00818949, 00818951, 00824405 |
| Pneumatic Tyred Roller | BW 27 RH | 00817757, 00818315, 00818953, 00818997, 00824407 |
| Refuse / Landfill Compactor | BC 1172 RB | 00817827 |
| Refuse / Landfill Compactor | BC 772 RB-2 | 00818179 |
| Refuse / Landfill Compactor | BC 672 RB-2 | 00818181 |
| Refuse / Landfill Compactor | BC 572 RB-2 | 00818183 |
| Refuse / Landfill Compactor | BC 772 RS-2 | 00818185 |
| Soil Compactor | BC 772 EB-2 | 00818187 |
| Refuse / Landfill Compactor | BC 972 RB-2 | 00818191 |
| Refuse / Landfill Compactor | BC 1172 RB-2 | 00818193 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Pneumatic Tyred Roller | BW24RH | 00818279, 00818691 |
| Single Drum Roller | BW177PDH 5 | 00818281 |
| Pneumatic Tyred Roller | BW 25 RH | 00818321 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Pneumatic Tyred Roller | BW 27 RH-4i | 00824131, 00824409 |
| Recycler / Stabilizer | BS 12000 | 00824291 |
| Recycler / Stabilizer | BS 12000 Profi | 00824293 |
| Recycler / Stabilizer | BS 16000 Profi | 00824295 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Pneumatic Tyred Roller | BW 27 RH-4i BC | 00824723 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824755 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Recycler / Stabilizer | RS 460 | 00824809 |
| Refuse / Landfill Compactor | BC 1172 RB-4 | 00824901 |
| Recycler / Stabilizer | BS 12000 PROFI | 00824979 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Walk-Behind / Light Roller | BW 75 E | 00811011, 00811643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
