The Bomag 05716217 Cylinder Head Gasket is a genuine OEM component designed for a wide range of Bomag single drum rollers, tandem rollers, pneumatic tyred rollers, and cold milling machines. Sourced directly from Bomag, this cylinder head gasket delivers the exact material grade, thickness, and sealing geometry required for the engine configurations found across covered equipment. Confirmed fitment includes BW 213 D-3, BW 211 D-4, BW 177 DH-4, BW 179 PDH-4, BW 202 AD-4, BW 161 AD-4, BW 24 RH, BW 25 RH, BW 28 RH, BM 500/15, BM 600/15, and many additional BW-series variants through the -40, -50, and -5 generation lines. When engine sealing integrity matters, replacing with part number 05716217 ensures the engine bay returns to the correct operating parameters without improvisation.
Key Features
- Genuine OEM Sealing Specification — manufactured to Bomag's exact material grade and compression rating, ensuring the head-to-block interface seals combustion gases, coolant, and oil passages correctly for this engine configuration
- Direct Drop-In Replacement — matches the bolt pattern, bore openings, and fire-ring positioning of the original, allowing straightforward installation during a top-end rebuild or head reseal
- Broad Cross-Family Coverage — fits BW-series single drum rollers, tandem rollers, and pneumatic tyred rollers, as well as BM 500/15 and BM 600/15 cold milling machines, covering multiple generation variants including -3, -4, -40, -50, and -5 SL models
- Combustion Integrity Restored — a failed or degraded cylinder head gasket leads to coolant loss, compression bleed-off, and potential engine overheating; this gasket restores full compression and fluid separation so the engine delivers rated power output
- Critical Fuel and Coolant Safety Seal — correct head gasket integrity prevents combustion gases from entering the cooling circuit and coolant from entering the combustion chamber, both of which can cause severe and rapid engine damage if left unchecked
The cylinder head gasket sits between the engine block and the cylinder head, forming a high-pressure seal that keeps combustion gases contained within the cylinders while also separating the coolant and oil passages routed through that junction. It must withstand repeated thermal cycling and the mechanical clamping load of the head bolts across the full service life of the engine. When this gasket fails — typically signaled by white exhaust smoke, coolant loss, or a milky oil appearance — engine performance drops quickly and internal damage can follow if the machine continues to operate, making timely replacement with a correctly specified part essential.
Part Details
| Part Number | 05716217 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Cylinder Head Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Drum Roller | BW 213 D-3 | 00817588 |
| Single Drum Roller | BW 211 PD-3 | 00817608 |
| Tandem Roller | BW 161 AD-4 | 00817641 |
| Tandem Roller | BW 202 AD-4 | 00817642, 00818381, 00818961, 00824005 |
| Single Drum Roller | BW211D 3 | 00817649 |
| Single Drum Roller | BW 211-PD-3 | 00817651 |
| Tandem Roller | BW 161 ADH-4 | 00817739 |
| Pneumatic Tyred Roller | BW 24 RH | 00817755, 00818457, 00818949, 00818951, 00824405 |
| Pneumatic Tyred Roller | BW 27 RH | 00817757, 00818315, 00818953, 00818997, 00824407 |
| Single Drum Roller | BW 177 DH-4 | 00817761, 00817765 |
| Single Drum Roller | BW 177 PDH-4 | 00817763 |
| Single Drum Roller | BW 179 DH-4 | 00817767 |
| Single Drum Roller | BW 179 PDH-4 | 00817769 |
| Single Drum Roller | BW 211 D-4 | 00817771, 00817951 |
| Single Drum Roller | BW 213 D-4 | 00817773 |
| Tandem Roller | BW 190 AD-4 | 00817823, 00818379, 00818965, 00824009 |
| Tandem Roller | BW 190 AD-4 AM | 00817825, 00818309, 00824021 |
| Tandem Roller | BW 203 AD-4 AM | 00817837, 00818591, 00824019, 00825067 |
| Single Drum Roller | BW 212 D-30 | 00817907 |
| Single Drum Roller | BW 211 PD-4 | 00817939 |
| Single Drum Roller | BW 211 D-40 | 00817941, 00818371, 00818391, 00818875, 00824269 |
| Single Drum Roller | BW 212 D-40 | 00817943, 00818587, 00818823, 00818881, 00824279 |
| Single Drum Roller | BW 213 D-40 | 00817945 |
| Tandem Roller | BW 161 AC-4 | 00817947 |
| Single Drum Roller | BW 214 DHC-4 | 00818029 |
| Single Drum Roller | BW 213 DHC-4 | 00818031 |
| Single Drum Roller | BW 179 DHC-4 | 00818033 |
| Single Drum Roller | BW 177 DHC-4 | 00818035 |
| Single Drum Roller | BW 212 PD-40 | 00818061, 00818883 |
| Single Drum Roller | BW 213 PD-40 | 00818063 |
| Single Drum Roller | BW 211 PD-40 | 00818065 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Single Drum Roller | BW 213 PDHC-4 | 00818117 |
| Single Drum Roller | BW 214 PDHC-4 | 00818119 |
| Single Drum Roller | BW 213 PD-4 | 00818167 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873 |
| Pneumatic Tyred Roller | BW24RH | 00818279, 00818691 |
| Single Drum Roller | BW177PDH 5 | 00818281 |
| Single Drum Roller | BW 177 PDHC-4 | 00818283 |
| Single Drum Roller | BW 179 PDHC-4 | 00818285 |
| Pneumatic Tyred Roller | BW 25 RH | 00818321 |
| Tandem Roller | BW 161 ADH-4 CHINA | 00818365 |
| Tandem Roller | BW 203 AD-4 | 00818599, 00818963 |
| Tandem Roller | BW 161 AD-50 | 00824111 |
| Tandem Roller | BW 202 AD-50 | 00824113 |
| Single Drum Roller | BW 215 D-40 | 00824167 |
| Tandem Roller | BW 206 AD-50 | 00824289 |
| Tandem Roller | BW 202 AD-4 EU-Flex | 00824395 |
| Tandem Roller | BW 203 AD-4 AM EU-Flex | 00824397 |
| Tandem Roller | BW 161 ADO-50 | 00824417 |
| Tandem Roller | BW 202 ADO-50 | 00824419 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Tandem Roller | BW203AD-4 | 00824739, 00826243 |
| Tandem Roller | BW 161 AC-50 | 00824853 |
| Tandem Roller | BW 205 AD 4 | 00824889 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Tandem Roller | BW 203 ADO-4 | 00825049 |
| Tandem Roller | BW 206 ADO-50 | 00826103 |
| Pneumatic Tyred Roller | BW 28 RH | 00826177 |
| Single Drum Roller | BW 211 D-5 SL | 00826703 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
