The Bomag 05222470 Cylinder Roller Bearing is a genuine OEM component designed for Bomag BW 213, BW 225, and BW 226 series single drum rollers. Sourced directly from Bomag, this bearing meets the same specifications as the part installed at the factory, ensuring a direct, confidence-inspiring replacement. This cylinder roller bearing is engineered to handle the high radial loads and continuous vibration cycles that define heavy single drum roller operation. Verified fitment covers a wide range of BW 213 and BW 226 variants, including the BW 213 DH-3, BW 213 DH-4, BW 213-5, BW 226 DH-4, BW 226 DH-4i, BW 226-5, BW 226 DI-5, BW 226 RC-5, BW 225 D-3, BW 225, BW 219-5, and additional BW 213 generation variants.
Key Features
- Genuine OEM Precision Tolerancing — manufactured to Bomag's exact radial load and dimensional specifications for cylinder roller bearings, ensuring correct clearance and load distribution in heavy vibratory roller applications.
- Direct Drop-In Replacement — matches the original bearing's dimensions and mounting interface, fitting the same seat without machining or adaptation.
- Broad BW-Series Coverage — confirmed fitment across BW 213, BW 225, BW 219, and BW 226 single drum roller variants, including generation -3, -4, -4i, and -5 models as well as VARIOCONTROL and RC-5 configurations.
- Sustained Load Capacity — cylinder roller bearings carry significantly higher radial loads than ball-type equivalents, making proper specification critical in drum drive and vibratory mechanism applications where sustained force is constant.
- Protects Adjacent Components — a worn or failed bearing creates excess shaft play, accelerating wear on seals, housings, and drive components; replacing with a correctly spec'd OEM part stops that damage chain early.
A cylinder roller bearing supports rotating shafts under high radial loads by using cylindrical rolling elements rather than balls, allowing a larger contact area and greater load capacity with less rolling friction. In a single drum roller like the BW 213 or BW 226, these bearings are typically found in drum drive assemblies, exciter mechanisms, and axle housings where the machine generates and transmits intense compaction forces. When a cylinder roller bearing wears out or loses its internal clearance, vibration and noise increase, shaft alignment deteriorates, and surrounding seals and housings begin to suffer — catching and replacing this bearing promptly keeps the drivetrain and vibration system running as intended.
Part Details
| Part Number | 05222470 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Cylinder Roller Bearing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Drum Roller | BW 213 DH-3 | 00817527, 00817528 |
| Single Drum Roller | BW 225 D-3 | 00817548 |
| Single Drum Roller | BW 225 | 00817549 |
| Single Drum Roller | BW 213 DH 3 VARIOCONTOL | 00817591, 00817605 |
| Single Drum Roller | BW 216 DHC-3 | 00817644 |
| Single Drum Roller | BW 213 DH-4 | 00817779, 00817781, 00818123, 00818289, 00824041, 00824143 |
| Single Drum Roller | BW 226 DH-4 | 00817813, 00817819, 00818049, 00818865 |
| Single Drum Roller | BW 226 DH-4i | 00818051 |
| Single Drum Roller | BW 213 DH 16 | 00818383, 00824151 |
| Single Drum Roller | BW 213 DH-4BVC EU-Flex | 00824435 |
| Single Drum Roller | BW 213 DH-4i | 00824439, 00824447, 00824675 |
| Single Drum Roller | BW 213 | 00824577, 00825991 |
| Single Drum Roller | BW 226-5 | 00824583, 00824883, 00825717 |
| Single Drum Roller | BW 213 DH 4I | 00824679 |
| Single Drum Roller | BW 213-5 | 00824733, 00824867, 00825987 |
| Single Drum Roller | BW 226 DI-5 | 00824817, 00824975, 00825711 |
| Single Drum Roller | BW 226 RC-5 | 00824819 |
| Single Drum Roller | BW 219-5 | 00824831, 00826787 |
| Single Drum Roller | BW 226 | 00824971 |
| Single Drum Roller | BW 213-5 PL | 00827273 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
