The Bomag 05751233 Flash and Position Light is a genuine OEM visibility component designed for a wide range of Bomag tandem rollers, pneumatic tyred rollers, and cold milling machines. As a direct OEM replacement, this light is built to the same specifications as the original unit, ensuring correct fitment and proper operation without any guesswork. This part is confirmed for use on BW-series tandem rollers including the BW 141 AD-5, BW 151 AD-5, BW 154 AD-5, BW 161 AD-5, BW 174 AP-4, BW 191 AD-5, BW 202 AD-5, and BW 206 AD-5, as well as BW 24 RH, BW 25 RH, BW 27 RH, and BW 28 RH pneumatic tyred rollers, and BM 500/15 and BM 600/15 cold milling machines. Sourced directly from Bomag, part number 05751233 carries the full assurance of genuine OEM origin.
Key Features
- Genuine OEM Optical Output — manufactured to Bomag's exact luminosity and flash-frequency specifications, so the light signals correctly under all operating conditions
- Exact-Match Mounting — matches the original connector, housing profile, and mounting points for a clean, tool-minimal installation on covered machine variants
- Broad BW and BM Coverage — fits a large cross-section of Bomag tandem rollers, pneumatic tyred rollers including the BW 24 RH, BW 27 RH, and BW 28 RH, and cold milling machines such as the BM 500/15 and BM 600/15
- Sustained Visibility in Demanding Conditions — a correctly functioning flash and position light keeps the machine visible to co-workers and traffic around the jobsite; a failed unit can leave the machine unmarked during low-light or high-traffic operations
- Operator and Site Safety — position and warning lighting is a regulatory requirement on road-going and site-operating compaction and milling equipment; replacing a failed light promptly keeps the machine compliant with site safety requirements
The flash and position light serves as both a warning beacon and a steady position marker on large compaction and milling equipment. The flashing mode alerts nearby workers and road users to the machine's presence, while the position light provides a continuous locating signal during low-visibility conditions such as early-morning paving operations or night milling shifts. When this light fails — whether due to a blown bulb, cracked housing, or damaged connector — the machine loses a critical visibility signal, which can create compliance issues and increase the risk of on-site incidents.
Part Details
| Part Number | 05751233 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Flash and Position Light |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873, 00824553 |
| Tandem Roller | BW 154 AP-4 AM | 00818299, 00824177, 00824715 |
| Tandem Roller | BW 154 AP-4 | 00818301, 00824179, 00824717 |
| Tandem Roller | BW 154 ACP-4 AM | 00818303, 00824719 |
| Tandem Roller | BW 154 ACP-4 | 00818305, 00824721 |
| Pneumatic Tyred Roller | BW 25 RH | 00818321 |
| Tandem Roller | BW 174 AP-4 AM | 00818655, 00818845, 00824543 |
| Tandem Roller | BW 174 AP-4 | 00818657, 00818847, 00824545 |
| Pneumatic Tyred Roller | BW24RH | 00818691 |
| Pneumatic Tyred Roller | BW 24 RH | 00818949, 00818951, 00824405 |
| Pneumatic Tyred Roller | BW 27 RH | 00818953, 00818997, 00824407 |
| Tandem Roller | BW 174 AP-4 AM PB | 00818971 |
| Tandem Roller | BW 174 AP-4 PB | 00818973 |
| Tandem Roller | BW 141 AD-5 | 00824049, 00825593 |
| Tandem Roller | BW 151 AD-5 | 00824051, 00825595 |
| Tandem Roller | BW 154 AD-5 | 00824053, 00825597 |
| Tandem Roller | BW 151 AD-5 AM | 00824055 |
| Tandem Roller | BW 151 AC-5 | 00824057 |
| Tandem Roller | BW 141 AD-50 | 00824059 |
| Tandem Roller | BW 174 AP-4i AM | 00824093, 00824627, 00825051 |
| Tandem Roller | BW 174 AP-4i | 00824095, 00824629, 00825053 |
| Tandem Roller | BW 161 AD-5 | 00824103, 00824647, 00824945 |
| Tandem Roller | BW 161 AC-5 | 00824109, 00824655, 00826605 |
| Tandem Roller | BW 161 AD-50 | 00824111 |
| Tandem Roller | BW 202 AD-50 | 00824113 |
| Pneumatic Tyred Roller | BW 27 RH-4i | 00824131, 00824409 |
| Tandem Roller | BW 191 AD-5 | 00824281, 00825965 |
| Tandem Roller | BW 206 AD-5 | 00824283, 00825967 |
| Tandem Roller | BW 206 AD-5 AM | 00824287 |
| Tandem Roller | BW 206 AD-50 | 00824289 |
| Tandem Roller | BW 161 ADO-5 | 00824359, 00824657, 00824947 |
| Tandem Roller | BW 190 AD-5 | 00824361, 00824603, 00824651 |
| Tandem Roller | BW 190 ADO-5 | 00824363, 00824661, 00824949 |
| Tandem Roller | BW 154 AP-4i AM | 00824385 |
| Tandem Roller | BW 161 ADO-50 | 00824417 |
| Tandem Roller | BW 202 ADO-50 | 00824419 |
| Tandem Roller | BW 151 AD-50 | 00824501, 00824567 |
| Tandem Roller | BW 151 AC-50 | 00824503 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Tandem Roller | BW 154 AP-4i | 00824587 |
| Tandem Roller | BW 154 ACP-4i AM | 00824589, 00825383 |
| Tandem Roller | BW 191 ADO-5 | 00824599 |
| Tandem Roller | BW 206 ADO-5 | 00824601 |
| Tandem Roller | BW 202 AD-5 | 00824649, 00826599 |
| Pneumatic Tyred Roller | BW 27 RH-4i BC | 00824723 |
| Cold Milling Machine | BM 500 15 P8 | 00824743 |
| Cold Milling Machine | BM600 /15 | 00824745 |
| Tandem Roller | BW 161 AC-50 | 00824853 |
| Tandem Roller | BW 174 AP-4f AM | 00824909 |
| Tandem Roller | BW 174 AP-4f | 00824911 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Pneumatic Tyred Roller | BW 28 RH | 00824957, 00826041, 00826173, 00826175, 00826177 |
| Tandem Roller | BW 174 APO-4i | 00825099 |
| Tandem Roller | BW 174 ACP 4I AM | 00825103 |
| Tandem Roller | BW161AD 5 | 00825627, 00826591 |
| Tandem Roller | BW190AD 5 | 00825631, 00825641, 00826595, 00826597 |
| Tandem Roller | BW161AC 5 | 00825635 |
| Tandem Roller | BW161ADO 5 | 00825637, 00826593 |
| Tandem Roller | BW 202 ADO-5 | 00825639 |
| Tandem Roller | BW 174 AP-4v AM | 00825819 |
| Tandem Roller | BW 191 AD-5 AM | 00825969 |
| Tandem Roller | BW 206 ADO-50 | 00826103 |
| Tandem Roller | BW 174 APO-4f | 00826149 |
| Pneumatic Tyred Roller | BW28RH | 00826695 |
| Tandem Roller | BW141AD 5 | 00827405 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
