The Bomag 07280806 Flat Head Screw is a genuine OEM fastener designed for a wide range of Bomag pavers, single drum rollers, pneumatic tyred rollers, and cold milling machines. As an OEM-sourced component, this flat head screw matches the exact dimensions and material spec of the original hardware installed at the factory. This screw is confirmed to fit BF-series pavers including the BF 300 P, BF 600 P-3 S 500, BF 700 C-3 S 600, and BF 800 C-3 S 600, along with BW-series rollers such as the BW 213 D, BW 27 RH-4i, and BW 28 RH, and BM-series cold milling machines including the BM 1000/35, BM 1200/35 T4f, and BM 1300/35 T4f. Sourcing part number 07280806 directly through DHS Equipment ensures you receive the correct OEM fastener without substitution.
Key Features
- OEM-Matched Thread and Head Profile — manufactured to the same dimensional spec as the original, ensuring flush seating and full thread engagement on mating surfaces across all covered Bomag models
- Direct Drop-In Replacement — this flat head screw installs in place of the original hardware with no re-drilling, reworking, or adaptation of the mounting point
- Broad Bomag Coverage — fits BF-series pavers, BW single drum and pneumatic tyred rollers, and BM cold milling machines including the BF 300 P, BF 600 P-3 S 500, BW 213 D, BW 27 RH-4i, BM 1200/35, and more
- Correct Clamping Load — a properly torqued flat head screw maintains the intended clamping force on panels, covers, and structural joints; a worn or wrong-spec fastener can lead to vibration-induced loosening and component misalignment in high-cycle compaction and paving applications
- Genuine OEM Part — sourced directly from Bomag, part number 07280806 carries full OEM traceability and is the same hardware used in original equipment assembly
A flat head screw is a countersunk fastener designed to sit flush with — or just below — the surface of the material it secures. In construction equipment, flat head screws are used where a protruding fastener head would interfere with adjacent components, panels, or moving parts. Using the correctly specified screw matters because mismatched thread pitch, head angle, or material grade can result in stripping, under-clamping, or fastener failure under load — problems that compound quickly in the high-vibration environment of a roller, paver, or milling machine. Replacing a worn or damaged fastener with the OEM-spec 07280806 restores the joint to its designed holding strength and prevents progressive damage to the host material.
Part Details
| Part Number | 07280806 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Flat Head Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Paver | BF 300 P | 00800647 |
| Paver | BF 300 C | 00800649 |
| Paver | BF 600 C-E | 00800651 |
| Paver | BF 600 P-E | 00800653 |
| Paver | BF 800 C S500 | 00800677, 00800679, 00800827, 00800871 |
| Paver | BF 800 C S600 | 00800681, 00800683, 00800779, 00800829, 00800851, 00800873, 00824541 |
| Paver | BF 800 P S500 | 00800685, 00800687, 00800831, 00800879 |
| Paver | BF 300 P S340 V | 00800711, 00824189 |
| Paver | BF 300 P S340 TV | 00800715, 00824187 |
| Paver | BF 300 C S340 TV | 00800717, 00824191 |
| Paver | BF 600P HSE | 00800719, 00800727, 00824239 |
| Paver | BF 600 P HCE | 00800721 |
| Paver | BF 600C HCE | 00800725, 00800733 |
| Paver | BF 600P HCE | 00800729 |
| Paver | BF 600C HSE | 00800731 |
| Paver | BF 800 C S600 SOIL | 00800745 |
| Paver | BF 900 C S500 | 00800753, 00800787 |
| Paver | BF 300 P S340-2 TV | 00800755, 00800759, 00800817 |
| Paver | BF 300 C S340-2 TV | 00800757, 00800761 |
| Paver | BF 300 P S340-2 V | 00800763, 00800767 |
| Paver | BF 300 C S340-2 V | 00800769 |
| Paver | BF 900 C S600 | 00800771, 00800783 |
| Paver | BF 600 C-2 S 500 | 00800791, 00800907, 00824199, 00824485, 00824489 |
| Paver | BF 600 P-2 S 500 | 00800795, 00800865, 00800911, 00825913 |
| Paver | BF 700 C-2 S 600 | 00800797, 00800867, 00824491 |
| Paver | BF 700 C-2 S 500 | 00800799, 00800869, 00800899, 00824493 |
| Paver | BF 300 C-2 S340-2 TV | 00800809, 00825649 |
| Paver | BF 300 P-2 S340-2 TV | 00800811, 00825651 |
| Paver | BF 300 P-2 S340-2 V | 00800815 |
| Paver | BF 900 C S600-4i | 00800921 |
| Paver | BF 800 C S600-4i | 00800925, 00824211 |
| Paver | BF 800 P S600-4i | 00800929, 00824219 |
| Paver | BF 800 C S600-T3 | 00800939 |
| Paver | BF 900 C S600-T3 | 00800943 |
| Paver | BF 600 P-2 S 600 | 00800949, 00825915 |
| Single Drum Roller | BW 213 D | 00810062, 00814209 |
| Pneumatic Tyred Roller | BW 24 R | 00817552, 00817854 |
| Pneumatic Tyred Roller | C 560 B | 00817598 |
| Pneumatic Tyred Roller | BW 24 RH | 00817755, 00818457, 00818949, 00818951, 00824405 |
| Pneumatic Tyred Roller | BW 27 RH | 00817757, 00818315, 00818953, 00818997, 00824407 |
| Pneumatic Tyred Roller | BW24RH | 00818279, 00818691 |
| Single Drum Roller | BW177PDH 5 | 00818281 |
| Pneumatic Tyred Roller | BW 25 RH | 00818321 |
| Pneumatic Tyred Roller | BW 27 RH-4i | 00824131, 00824409 |
| Paver | BF 700 C S500 | 00824207 |
| Paver | BF 800 P S500-4i | 00824217 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Paver | BF 600 C-2 S 600 | 00824487, 00825903 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Pneumatic Tyred Roller | BW 27 RH-4i BC | 00824723 |
| Pneumatic Tyred Roller | BW 11 RH-5 | 00824939, 00824993, 00825667 |
| Pneumatic Tyred Roller | BW 28 RH | 00824957, 00826041, 00826173, 00826175, 00826177 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Paver | BF 300 C-2 S340-2 V | 00825653 |
| Paver | BF 600 P-3 S 500 | 00826343, 00826971 |
| Paver | BF 700 C-3 S 500 | 00826351 |
| Paver | BF 800 C-3 S 600 | 00826407 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
| Cold Milling Machine | BM1000/35-2 | 00826489 |
| Paver | BF 700 C-3 S 600 | 00827127 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
