The Bomag 05720105 Fuel Pipe is a genuine OEM component designed for a wide range of Bomag reversible vibratory plates, vibratory plates, and walk-behind light rollers, including the BPR 35/60 D, BPR 40/60 D, BP 25/48 D, BP 25/50 D, and BW 71 E-2. Sourced directly from Bomag, this fuel pipe delivers an exact match to the original routing, diameter, and connection specs — no adaptation needed. It fits the full spread of diesel-engine compaction equipment in the BPR, BPH, BP, BVP, and BW light roller lines covered under part number 05720105, giving operators and service technicians a single confirmed part for cross-fleet maintenance.
Key Features
- Genuine OEM Fuel Delivery Integrity — manufactured to Bomag's original fuel-line spec, ensuring correct flow rate and pressure-tight connections at both ends of the fuel circuit
- Direct Drop-In Replacement — matches the original pipe routing, end fittings, and length so installation follows the factory service procedure without reworking hose runs or brackets
- Broad Diesel Compactor Coverage — confirmed fitment across BPR-series reversible vibratory plates (including BPR 25/40 D, BPR 30/38 D-3, BPR 35/42 D, BPR 35/42 D/H, BPR 35/60 D, BPR 35/60 D/H, BPR 25/45 D-3, BPR 25/50 D, BPR 40/60 D, BPR 40/60 D/E), BP-series vibratory plates (BP 18/45 D-2, BP 20/45 D, BP 20/50 D, BP 25/48 D, BP 25/50 D), BVP 18/45 D, and the BW 71 E-2 walk-behind roller
- Fuel System Reliability — a cracked or deteriorated fuel pipe starves the engine of consistent fuel supply, causing hard starts, rough running, and uneven compaction output; replacing it promptly restores steady engine fueling
- Fuel-Safety Compliance — an intact, correctly routed fuel pipe prevents raw fuel leaks near hot engine surfaces, supporting safe machine operation on every job
The fuel pipe carries diesel fuel from the tank to the engine's fuel system, maintaining a consistent, uninterrupted supply under the vibration and heat loads typical of compaction equipment. Because these machines generate significant continuous vibration, fuel lines are subject to fatigue, cracking, and fitting wear over time. A compromised fuel pipe can cause fuel starvation, erratic engine behavior, or — in the case of an active leak — a fire hazard, making timely replacement an important part of routine service on any diesel-powered Bomag plate or roller.
Part Details
| Part Number | 05720105 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Fuel Pipe |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Reversible Vibratory Plate | BPR 30/38 D-3 | 00817707, 00817709 |
| Vibratory Plate | BP 25/48 D | 00817999, 00818461 |
| Walk-Behind / Light Roller | BW 71 E-2 | 00818081 |
| Reversible Vibratory Plate | BPR 35/42 D | 00818085, 00818087, 00818483, 00818485, 00818757, 00818759, 00824311, 00824313, 00824767, 00824771, 00825531, 00825805, 00825807, 00826513, 00826515, 00827469, 00827463 |
| Reversible Vibratory Plate | BPR 35/60 D | 00818089, 00818091, 00818487, 00818489, 00818761, 00818763, 00824243, 00824317, 00824319, 00824371, 00824373, 00824769, 00824773, 00824793, 00825529, 00825533, 00825783, 00825785, 00826517, 00826519, 00827471, 00827465 |
| Reversible Vibratory Plate | BPR 25/45 D-3 | 00818269 |
| Vibratory Plate | BP 18/45 D-2 | 00818275, 00818459 |
| Reversible Vibratory Plate | BPR 25/40 D | 00818403, 00818753, 00824241, 00824305, 00824369, 00824763, 00824789, 00825523, 00825813, 00826509, 00827313 |
| Vibratory Plate | BP 25/50 D | 00818649, 00818751, 00824345, 00824759, 00825033, 00825129, 00827105, 00825509, 00825691, 00826125 |
| Reversible Vibratory Plate | BPR 25/50 D | 00818755, 00824309, 00824765, 00825525, 00825781, 00826511, 00827315, 00818405 |
| Reversible Vibratory Plate | BPR 40/60 D | 00824895, 00824897, 00825543, 00825809, 00825811, 00826521, 00826523, 00827473, 00827467 |
| Vibratory Plate | BVP 18/45 D | 00825159, 00825323, 00825477, 00826205 |
| Vibratory Plate | BP 20/50 D | 00825687, 00818749, 00825127, 00825507, 00826123, 00818643 |
| Vibratory Plate | BP 20/45 D | 00827101 |
| Reversible Vibratory Plate | BPR 35/42 D/H | 00825527 |
| Reversible Vibratory Plate | BPR 35/60 D/H | 00824791 |
| Reversible Vibratory Plate | BPR 40/60 D/E | 00825545 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
