The Bomag 05766962 Glow Control Unit is a genuine OEM electrical component designed for a broad range of Bomag single drum rollers, pneumatic tyred rollers, and tandem rollers. As a direct OEM replacement, this unit meets Bomag's original design specifications, ensuring the diesel cold-start system operates exactly as intended from the factory. This glow control unit is confirmed to fit models including the BW 211 D-4, BW 213 D-4, BW 216 D-4, BW 219 D-4, BW 177 DHC-4, BW 179 DHC-4, BW 214 DHC-4, BW 216 DHC-4, BW 24 RH, BW 27 RH, BW 161 AD-50, BW 202 AD-50, and many additional BW-series variants. Sourcing part number 05766962 directly from the OEM catalog means you get the correct electrical specification the first time — no guesswork on compatibility.
Key Features
- OEM-Correct Electrical Specification — matched to Bomag's original voltage timing and relay output requirements for the diesel glow system, so cold-start performance is not compromised
- Drop-In Connector Compatibility — designed to mate with the existing OEM wiring harness on BW-series rollers and compatible models, with no splicing or pin adaptation needed
- Wide BW-Series Coverage — fits single drum rollers including BW 211, BW 212, BW 213, BW 214, BW 215, BW 216, BW 218, BW 219, and BW 220 variants, pneumatic tyred rollers BW 24 RH and BW 27 RH, and tandem rollers BW 161 AD-50 and BW 202 AD-50
- Cold-Start Reliability — a functioning glow control unit delivers the precise pre-heat cycle that diesel engines require in cold conditions; a failed unit results in hard starting, excessive cranking, and potential engine wear from incomplete combustion
- Fuel System Safety Compliance — correct glow plug timing prevents uncontrolled fuel injection events during start-up; using a properly specified OEM unit maintains safe ignition sequencing on diesel-powered compaction equipment
- Genuine Bomag OEM Part — supplied as an authentic Bomag component under part number 05766962, backed by OEM traceability for fleet maintenance records and service documentation
The glow control unit manages the pre-heating cycle for diesel engine glow plugs before and during start-up. It sends a timed electrical signal to the glow plugs, raising combustion chamber temperature high enough for reliable diesel ignition — especially critical in cold ambient conditions. When the glow control unit fails, the engine may crank without firing, start roughly with white smoke, or fail to start entirely, putting the machine out of service until the unit is replaced.
Part Details
| Part Number | 05766962 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Glow Control Unit |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Drum Roller | BW 211 DE-40 | 00800913 |
| Pneumatic Tyred Roller | BW 24 RH | 00817755 |
| Pneumatic Tyred Roller | BW 27 RH | 00817757 |
| Single Drum Roller | BW 216 D-4 | 00817797 |
| Single Drum Roller | BW 211 PD-4 | 00817939, 00818329, 00824161, 00824391 |
| Single Drum Roller | BW 211 D-40 | 00817941, 00818129, 00818391 |
| Single Drum Roller | BW 212 D-40 | 00817943, 00818881 |
| Single Drum Roller | BW 213 D-40 | 00817945, 00818291 |
| Single Drum Roller | BW 216 DHC-4 | 00818027 |
| Single Drum Roller | BW 214 DHC-4 | 00818029, 00818337 |
| Single Drum Roller | BW 213 DHC-4 | 00818031, 00818331 |
| Single Drum Roller | BW 179 DHC-4 | 00818033 |
| Single Drum Roller | BW 177 DHC-4 | 00818035 |
| Single Drum Roller | BW 216 PD-4 | 00818053 |
| Single Drum Roller | BW 212 PD-40 | 00818061, 00818883 |
| Single Drum Roller | BW 213 PD-40 | 00818063 |
| Single Drum Roller | BW 211 PD-40 | 00818065, 00818319 |
| Single Drum Roller | BW 213 PDHC-4 | 00818117, 00818333 |
| Single Drum Roller | BW 214 PDHC-4 | 00818119 |
| Single Drum Roller | BW 211 D-4 | 00818127, 00824159, 00824389 |
| Single Drum Roller | BW 213 PD-4 | 00818167, 00818335 |
| Pneumatic Tyred Roller | BW24RH | 00818279 |
| Single Drum Roller | BW177PDH 5 | 00818281 |
| Single Drum Roller | BW 177 PDHC-4 | 00818283 |
| Single Drum Roller | BW 179 PDHC-4 | 00818285 |
| Single Drum Roller | BW 213 D-4 | 00818293, 00824157, 00824387 |
| Tandem Roller | BW 161 ADH-4 CHINA | 00818365 |
| Single Drum Roller | BW 219 D-4 | 00818373 |
| Single Drum Roller | BW 219 PD-4 | 00818375 |
| Single Drum Roller | BW211D 40 | 00818415 |
| Single Drum Roller | BW211PD 40 | 00818417 |
| Single Drum Roller | C850D | 00818433 |
| Single Drum Roller | BW 216 D-40 | 00818611 |
| Single Drum Roller | BW 216 PD-40 | 00818653 |
| Single Drum Roller | BW 218 D-40 | 00818671 |
| Single Drum Roller | BW 220 D-4 | 00818989 |
| Tandem Roller | BW 161 AD-50 | 00824111 |
| Tandem Roller | BW 202 AD-50 | 00824113 |
| Single Drum Roller | BW 215 D-40 | 00824167 |
| Single Drum Roller | BW 211 D-4 EU-Flex | 00824429 |
| Single Drum Roller | BW 213 D-4 EU-Flex | 00824431 |
| Single Drum Roller | BW 220 D-40 | 00824803 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.