The Bomag 09410801 Grease Nipple is a genuine OEM component designed for a wide range of Bomag cold milling machines, tandem rollers, walk-behind and light rollers, single drum rollers, pneumatic tyred rollers, and recycler/stabilizers. As an authentic Bomag part, this grease nipple meets the same specifications as the original hardware installed at the factory, ensuring consistent grease flow and sealing performance across every lubrication point it serves. This nipple is confirmed to fit models including the BM 1000/35, BW 120 AD, BW 172 D-2, BW 27 RH, MPH 122, and RS 500, among many others across the Bomag lineup. Sourcing part number 09410801 directly from DHS Equipment ensures you receive a verified genuine OEM part for a dependable, long-lasting repair.
Key Features
- Genuine OEM Grease Fitting — manufactured to Bomag's original material and thread specification, delivering consistent grease retention and corrosion resistance at every service interval
- Drop-In Thread Compatibility — machined to match the original port thread dimensions, so this grease nipple installs directly without reworking the receiving bore
- Broad Bomag Fleet Coverage — fits cold milling machines, tandem rollers, walk-behind/light rollers, single drum rollers, pneumatic tyred rollers, and recycler/stabilizers, including the BM 500/15, BW 202 AD-2, MPH 600, RS 460, BW 75 AD, and BW 12 R, among others
- Proper Grease Delivery — a correctly seated grease nipple allows full lubrication of bearings and pivots during service; a damaged or missing nipple blocks grease flow, accelerating wear and leading to premature component failure
- Verified Part Number Traceability — ordering by part number 09410801 confirms you receive the correct nipple for your specific Bomag machine, eliminating guesswork at the service bay
A grease nipple — also called a grease fitting or zerk fitting — is the small threaded port through which lubricating grease is injected into a bearing housing, pivot pin, or other moving joint. During routine maintenance, a grease gun is pressed against the nipple's ball-check valve, forcing fresh grease into the lubrication cavity to displace contaminated grease and maintain a protective film between metal surfaces. When a grease nipple is damaged, clogged, or missing entirely, lubrication cannot reach the joint, causing accelerated metal-to-metal wear that can quickly destroy bearings, pins, and bushings — turning a minor service item into a costly component replacement.
Part Details
| Part Number | 09410801 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Grease Nipple |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM1300/30 | 00800607 |
| Cold Milling Machine | BM1200/30 | 00800617 |
| Walk-Behind / Light Roller | BW 75 ADL | 00810017 |
| Tandem Roller | BW 120 AD | 00810019, 00810051 |
| Single Drum Roller | BW 172 D-2 | 00810074 |
| Single Drum Roller | BW 142 D-2 | 00810077 |
| Tandem Roller | BW 90 AD | 00810081 |
| Tandem Roller | BW 164 AD | 00810155 |
| Tandem Roller | BW 80 AD-2 | 00810280, 00817566 |
| Tandem Roller | BW 90 AD-2 | 00810281, 00817569, 00818041, 00818507 |
| Pneumatic Tyred Roller | BW 12 R | 00813711 |
| Tandem Roller | BW 100 ADM-2 | 00817459 |
| Tandem Roller | BW 161 AC-2 | 00817492 |
| Tandem Roller | BW 161 AD-2 | 00817493, 00817494 |
| Tandem Roller | BW 164 AC-2 | 00817495 |
| Tandem Roller | BW 202 AD-2 | 00817516, 00817517 |
| Tandem Roller | BW 202 AHD-2 | 00817518 |
| Walk-Behind / Light Roller | BW 6 | 00817554, 00817955, 00818665 |
| Walk-Behind / Light Roller | BW 6 S | 00817555, 00817957, 00818683 |
| Walk-Behind / Light Roller | BW 71 E-2 | 00817562, 00818081, 00818463, 00818769, 00824551, 00824783, 00825515, 00825901, 00826209, 00826535 |
| Walk-Behind / Light Roller | BW 75 AD-2 | 00817563, 00811410 |
| Tandem Roller | BW 80 ADS | 00817567, 00818513 |
| Tandem Roller | BW 90 AC-2 | 00817568, 00818045 |
| Tandem Roller | BW 900 AD | 00817570 |
| Recycler / Stabilizer | MPH 121 | 00817587 |
| Recycler / Stabilizer | MPH 122 | 00817595 |
| Walk-Behind / Light Roller | BW 71 EHB-2 | 00817601, 00818083 |
| Tandem Roller | BW 164 AD-2 | 00817640 |
| Walk-Behind / Light Roller | BW 900-2 | 00817821, 00818363 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873, 00824553 |
| Recycler / Stabilizer | MPH 122-2 | 00818177, 00818727, 00818911, 00824987 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Pneumatic Tyred Roller | BW 27 RH | 00818315, 00818953, 00818997 |
| Pneumatic Tyred Roller | BW 24 RH | 00818457, 00818949, 00818951 |
| Pneumatic Tyred Roller | BW24RH | 00818691 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Pneumatic Tyred Roller | BW 27 RH-4i | 00824131, 00824409 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Pneumatic Tyred Roller | BW 27 RH-4i BC | 00824723 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Cold Milling Machine | BM 500 15 P8 | 00824743 |
| Cold Milling Machine | BM600 /15 | 00824745 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824753, 00824755 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Recycler / Stabilizer | RS 460 | 00824809, 00825187, 00825189 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Recycler / Stabilizer | MPH 364-2 | 00824973 |
| Recycler / Stabilizer | BS 12000 PROFI | 00824979 |
| Recycler / Stabilizer | RS 360 TIER-4F | 00825055 |
| Cold Milling Machine | BM 600/15 EU-Flex T4i | 00825065 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Recycler / Stabilizer | RS460 STAGE V | 00825263 |
| Cold Milling Machine | BM 2000/75 TE | 00825881 |
| Cold Milling Machine | BM 500/15 Stage V | 00825885 |
| Cold Milling Machine | BM 600/15 Stage V | 00825887 |
| Cold Milling Machine | BM 2500/75 | 00826375 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM 500/15-2 | 00826459 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Cold Milling Machine | BM 600/15-2 | 00826479 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
| Cold Milling Machine | BM1000/35-2 | 00826489 |
| Walk-Behind / Light Roller | BW 75 AD | 00810032, 00810132, 00811566 |
| Walk-Behind / Light Roller | BW 75 E | 00811643 |
| Walk-Behind / Light Roller | BW 75 S | 00810014 |
| Walk-Behind / Light Roller | BW 90 S | 00810016 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
