Bomag 08111217 Hexagon Nut

The Bomag 08111217 Hexagon Nut is a genuine OEM replacement fastener designed for a wide range of Bomag rollers, compactors, milling machines, pavers, recyclers, and stabilizers. As a direct OEM replacement, this nut is manufactured to the exact dimensional and material standards Bomag specifies, ensuring it threads and torques correctly wherever it is used in your machine. This part fits an extensive range of Bomag equipment, including BW-series tandem rollers, single drum rollers, and walk-behind rollers, BC-series refuse/landfill compactors and soil compactors, BM-series cold milling machines, recyclers and stabilizers such as the MPH 121, MPH 125, RS 460, and RS 500, the BF200C 2 paver, and vibratory plates including the BP 10/36 and BP 15/45. The Bomag 08111217 is the correct hardware choice when performing service, assembly, or repair work on any of the covered machines.

Key Features

• Genuine OEM Grade Hardware — manufactured to Bomag's specified thread form, dimensional tolerance, and material hardness rating, so this nut seats and clamps exactly as intended for each covered application
• Direct Fastener Replacement — threads match the mating bolt or stud without adjustment, making reinstallation straightforward during routine service or major repair work
• Broad Bomag Fleet Coverage — fits BW tandem rollers including the BW 100, BW 120, BW 138, BW 174, and BW 202 series; BW single drum rollers including the BW 124, BW 177, BW 213, and BW 225 series; BC refuse/landfill compactors from the BC 570 through BC 1172 families; BM cold milling machines including the BM 1000/35, BM 1200/35, BM 1300/35, BM 2000/75, BM 2200/75, and BM 2500/75; MPH and RS recyclers/stabilizers; walk-behind and light rollers including the BW 6, BW 75 E, BW 75 S, and BW 900-50; the BF200C 2 paver; BP-series vibratory plates; and the BW 85 T trench compactor — keep part number 08111217 in stock to cover multiple machines with a single fastener
• Correct Clamping Force — a fastener torqued to spec holds critical assemblies — guards, drive components, and structural brackets — securely under the constant vibration loads these compaction and milling machines generate; a wrong-grade or incorrect nut risks joint loosening and component damage over time
• Torque and Safety Critical Applications — on vibration-intensive machines, fastener integrity is directly tied to operator safety; using the correct OEM-specified nut helps ensure structural joints remain tight and within the designed load ratings throughout the service interval

A hexagon nut is a standard six-sided threaded fastener that mates with a bolt or stud to clamp two or more components together in a secure, load-bearing joint. In compaction and milling equipment that is subject to continuous vibration, correct fastener specification — including thread size, pitch, and material grade — is essential to maintaining proper clamping force and preventing joint failure. When a nut is the wrong grade or is worn, it can back off under vibration, leading to loose assemblies, accelerated wear on adjacent components, or structural failures that take equipment out of service.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.