The Bomag 05564830 Intermediate Flange is a genuine OEM component designed for a broad range of Bomag cold milling machines and rollers, including BM-series cold milling machines such as the BM 1200/30, BM 1300/30, and BM 1000/30-2, as well as BW-series tandem rollers, single drum rollers, and pneumatic tyred rollers including the BW 141 AD-5, BW 151 AD-5, BW 177 DH-5, and BW 11 RH-5. Sourced directly from Bomag, this flange matches the original engineering specifications of your machine for a drop-in installation. Confirming compatibility against part number 05564830 before ordering ensures a correct match across the full range of supported models.
Key Features
- Genuine OEM Precision — manufactured by Bomag to exact dimensional and material tolerances, ensuring the flange seats and seals correctly under the stress loads typical of milling and compaction equipment
- Direct OEM Replacement — this flange installs directly in place of the original, maintaining correct shaft alignment and load transfer without rework or modification to adjacent components
- Broad Confirmed Fitment — fits Bomag BM-series cold milling machines including the BM 1200/30, BM 1300/30, and BM 1300/30-T3, plus BW-series tandem rollers, single drum rollers, and the BW 11 RH-5 pneumatic tyred roller
- Structural Integrity Under Load — an intermediate flange that is worn, cracked, or improperly seated can cause misalignment, vibration, and accelerated wear on connected drivetrain or cutting-system components; replacing it promptly protects surrounding assemblies
- Authentic Part Number Traceability — ordering by Bomag part number 05564830 gives you full confidence that the component you receive is the correct OEM part for your specific machine configuration
An intermediate flange serves as a precision-machined connecting element between two rotating or structural assemblies, transferring torque or maintaining positional alignment between mating components such as shafts, housings, or drive units. On heavy equipment like cold milling machines and compaction rollers, this flange must maintain exact concentricity and face-to-face contact to prevent vibration, seal failure, or power loss through the drivetrain. When an intermediate flange wears or fails, the result is often misalignment that accelerates damage to bearings, seals, and adjacent drive components — making timely replacement critical to keeping the machine running at full capacity.
Part Details
| Part Number | 05564830 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Intermediate Flange |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM1300/30 | 00800607 |
| Cold Milling Machine | BM1200/30 | 00800617 |
| Cold Milling Machine | BM1000/30-2 | 00800665 |
| Cold Milling Machine | BM1000 30-2 | 00800667 |
| Cold Milling Machine | BM1200 30-2 | 00800669, 00800671 |
| Cold Milling Machine | BM1300/30-2 | 00800673 |
| Cold Milling Machine | BM1300 30-2 | 00800675 |
| Cold Milling Machine | BM1300/30-T3 | 00818425 |
| Tandem Roller | BW 141 AD-5 | 00824049, 00825593 |
| Tandem Roller | BW 151 AD-5 | 00824051, 00825595 |
| Tandem Roller | BW 154 AD-5 | 00824053, 00825597 |
| Tandem Roller | BW 151 AD-5 AM | 00824055 |
| Tandem Roller | BW 151 AC-5 | 00824057 |
| Tandem Roller | BW 141 AD-50 | 00824059 |
| Single Drum Roller | BW 145 DH-5 | 00824471, 00825721 |
| Single Drum Roller | BW 145 PDH-5 | 00824473, 00825723 |
| Single Drum Roller | BW 177 DH-5 | 00824475, 00824917, 00825435, 00825727 |
| Single Drum Roller | BW 177 PDH-5 | 00824477, 00825437, 00825729 |
| Single Drum Roller | BW 177BVC-5 | 00824479 |
| Tandem Roller | BW 151 AD-50 | 00824501, 00824567 |
| Pneumatic Tyred Roller | BW 11 RH-5 | 00824749 |
| Cold Milling Machine | BM 1200/30 | 00824963 |
| Cold Milling Machine | BM 1300/30 | 00824965, 00825095 |
| Single Drum Roller | BW 177-5 | 00825731 |
| Single Drum Roller | BW 177 PDH-5 PL | 00827075 |
| Single Drum Roller | BW 177 DH-5 PL | 00827077, 00827377 |
| Tandem Roller | BW141AD 5 | 00827405 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
