The Bomag 05719877 Jack is a genuine OEM component designed for a wide range of Bomag pavers, single drum rollers, tandem rollers, pneumatic tyred rollers, cold milling machines, refuse/landfill compactors, soil compactors, and recycler/stabilizers. Sourced directly from Bomag, this jack carries the same part number and specification as the original — so you get an exact match to what came off the machine. Compatible models include BF 600 and BF 700 series pavers, BW 213, BW 216, BW 219, and BW 226 single drum rollers, BW 190 and BW 202 tandem rollers, BC 672 RB and BC 772 RB refuse/landfill compactors, BM 500/15 and BM 600/15 cold milling machines, and MPH 122-2 and MPH 125 recyclers/stabilizers, among many others. When your machine needs this component replaced, part number 05719877 ensures you're installing the correct piece the first time.
Key Features
- Genuine OEM Construction — manufactured to Bomag's original design tolerances, ensuring the jack engages, extends, and supports exactly as the machine was built to require
- Direct-Fit Replacement — matches the original mounting interface and load rating, allowing installation without reworking brackets or hardware
- Broad Equipment Coverage — fits an extensive range of Bomag equipment including BF-series pavers, BW-series single drum and tandem rollers, BC-series refuse/landfill and soil compactors, BM-series cold milling machines, and MPH-series recyclers/stabilizers
- Structural Integrity Under Load — a jack that is worn, bent, or out of spec compromises machine stability during servicing and equipment positioning; this OEM part restores full rated support capacity
- Safe Machine Support — jacks are load-bearing service components; using a correctly rated OEM part is essential to maintaining safe working conditions when the machine is raised or stabilized
A jack is a mechanical lifting or stabilizing component used to raise, support, or position a machine during service, transport setup, or operation. On heavy construction equipment like pavers, rollers, and cold milling machines, the jack may serve as a leveling leg, a service stand support, or a mechanical actuator depending on its location in the assembly. When a jack becomes bent, corroded, or mechanically seized, it can prevent proper machine positioning, create unsafe working conditions, or cause misalignment in connected systems. Replacing a failed jack with a genuine OEM part restores the correct load capacity and dimensional fit the machine was designed around.
Part Details
| Part Number | 05719877 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Jack |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Paver | BF 600 P HCE | 00800631, 00800721 |
| Paver | BF 600 C HCE | 00800633 |
| Paver | BF 600 C HCG | 00800635 |
| Paver | BF 600 C HSG | 00800637 |
| Paver | BF 600 C HSE | 00800639 |
| Paver | BF 600 P HCG | 00800641 |
| Paver | BF 600 P HSE | 00800645 |
| Paver | BF 600 C-E | 00800651 |
| Paver | BF 600 P-E | 00800653 |
| Paver | BF 600 C-G | 00800655 |
| Paver | BF 691 C | 00800661 |
| Paver | BF 800 C S500 | 00800677, 00800679, 00800827, 00800871 |
| Paver | BF 800 C S600 | 00800681, 00800683, 00800779, 00800829, 00800851, 00800873, 00824541 |
| Paver | BF 800 P S500 | 00800685, 00800687, 00800831, 00800879 |
| Paver | BF 691 C-HSE | 00800689 |
| Paver | BF 691 P-HSE | 00800691 |
| Cold Milling Machine | BM 2000/60-2 | 00800693, 00800695 |
| Paver | BF 691 C-HB | 00800703 |
| Paver | BF 691P-HSE | 00800705 |
| Paver | BF 600P HSE | 00800719, 00800727, 00824239 |
| Paver | BF 600C HCE | 00800725, 00800733 |
| Paver | BF 600P HCE | 00800729 |
| Paver | BF 600C HSE | 00800731 |
| Paver | BF 800 C S600 SOIL | 00800745 |
| Paver | BF 700 C-2 S 500 | 00800899, 00824493 |
| Paver | BF 600 C-2 S 500 | 00800907, 00824485, 00824489 |
| Paver | BF 600 P-2 S 500 | 00800911 |
| Paver | BF 600 P-2 S 600 | 00800949, 00825915 |
| Refuse / Landfill Compactor | BC 670 RB | 00816001, 00816004 |
| Refuse / Landfill Compactor | BC 672 RB | 00816008 |
| Refuse / Landfill Compactor | BC 571 RB | 00816033, 00817400 |
| Refuse / Landfill Compactor | BC 671 RS | 00816304, 00817402 |
| Refuse / Landfill Compactor | BC 671 RB | 00817401 |
| Single Drum Roller | BW 225 D-3 | 00817548 |
| Single Drum Roller | BW 225 | 00817549 |
| Single Drum Roller | BW 177 DH-4 | 00817761, 00817765 |
| Single Drum Roller | BW 177 PDH-4 | 00817763 |
| Single Drum Roller | BW 179 DH-4 | 00817767 |
| Single Drum Roller | BW 179 PDH-4 | 00817769 |
| Single Drum Roller | BW 213 DH-4 | 00817775, 00817779, 00817781, 00818123, 00818125, 00818289, 00824039, 00824041, 00824143, 00824153 |
| Single Drum Roller | BW 213 PDH-4 | 00817777, 00818121, 00824145, 00824423 |
| Single Drum Roller | BW 214 DH-4 | 00817789, 00824147 |
| Single Drum Roller | BW 214 PDH-4 | 00817791, 00818345 |
| Single Drum Roller | BW 216 DH-4 | 00817793, 00818155, 00818849 |
| Single Drum Roller | BW 216 PDH-4 | 00817795, 00818157 |
| Single Drum Roller | BW 219 DH-4 | 00817799, 00818163, 00818857 |
| Single Drum Roller | BW 219 PDH-4 | 00817807, 00818071, 00818859 |
| Single Drum Roller | BW 226 DH-4 | 00817809, 00817813, 00817815, 00817819, 00818049, 00818073, 00818861, 00818865, 00825077 |
| Single Drum Roller | BW 226 PDH-4 | 00817811, 00818075 |
| Single Drum Roller | BW 219 D-4 | 00818095, 00818853, 00824821 |
| Single Drum Roller | BW 219 PD-4 | 00818097, 00818855 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Single Drum Roller | BW 211 D-40 | 00818129 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873 |
| Recycler / Stabilizer | MPH 122-2 | 00818177, 00818727, 00818911, 00824987 |
| Refuse / Landfill Compactor | BC 772 RB-2 | 00818179, 00818885, 00818933, 00824639 |
| Refuse / Landfill Compactor | BC 672 RB-2 | 00818181, 00818887, 00818931, 00824641 |
| Refuse / Landfill Compactor | BC 572 RB-2 | 00818183 |
| Refuse / Landfill Compactor | BC 772 RS-2 | 00818185, 00818895, 00824643 |
| Soil Compactor | BC 772 EB-2 | 00818187, 00818897 |
| Soil Compactor | BC 672 EB-2 | 00818189 |
| Refuse / Landfill Compactor | BC 972 RB-2 | 00818191, 00818701, 00818889 |
| Refuse / Landfill Compactor | BC 1172 RB-2 | 00818193, 00818703, 00818891 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Single Drum Roller | BW 213 D-4 | 00818293 |
| Tandem Roller | BW 190 AD-4 AM | 00818309, 00824021 |
| Pneumatic Tyred Roller | BW 27 RH | 00818315, 00818953, 00818997, 00824407 |
| Single Drum Roller | BW 211 PD-40 | 00818319 |
| Single Drum Roller | BW 216 PDHC-4 | 00818349 |
| Single Drum Roller | BW 216 D-4 | 00818351, 00824043 |
| Single Drum Roller | BW 216 PD-4 | 00818353, 00824155 |
| Tandem Roller | BW 190 AD-4 | 00818379, 00818965, 00824009 |
| Tandem Roller | BW 202 AD-4 | 00818381, 00818961, 00824005 |
| Single Drum Roller | BW 213 DH 16 | 00818383, 00824151 |
| Single Drum Roller | BW211D 40 | 00818415 |
| Single Drum Roller | BW211PD 40 | 00818417 |
| Single Drum Roller | BW 213 DH 4 | 00818437 |
| Refuse / Landfill Compactor | BC 472 RB | 00818439, 00818899 |
| Refuse / Landfill Compactor | BC 472 RS | 00818441, 00818907 |
| Soil Compactor | BC 462 EB | 00818443, 00818903 |
| Refuse / Landfill Compactor | BC 462 RB | 00818445, 00818905 |
| Tandem Roller | BW 203 AD-4 AM | 00818591, 00824019, 00825067 |
| Tandem Roller | BW 203 AD-4 | 00818599, 00818963 |
| Single Drum Roller | BW 332 | 00818725 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Single Drum Roller | BW 211 PD-4 | 00824391 |
| Tandem Roller | BW 202 AD-4 EU-Flex | 00824395 |
| Tandem Roller | BW 203 AD-4 AM EU-Flex | 00824397 |
| Single Drum Roller | BW 213 DH-4 EU-Flex | 00824433 |
| Single Drum Roller | BW 213 DH-4BVC EU-Flex | 00824435 |
| Paver | BF 600 C-2 S 600 | 00824487 |
| Paver | BF 700 C-2 S 600 | 00824491 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Single Drum Roller | BW 214 DH-4 EU Flex | 00824565 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Tandem Roller | BW203AD-4 | 00824739, 00826243 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Tandem Roller | BW 205 AD 4 | 00824889 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Single Drum Roller | BW 220 D-40 | 00824989 |
| Tandem Roller | BW 203 ADO-4 | 00825049 |
| Single Drum Roller | BW 219 D-5 | 00825219 |
| Single Drum Roller | BW 219 DH-5 | 00825223 |
| Single Drum Roller | BW 226 PDH-5 | 00825229 |
| Single Drum Roller | BW 211 D-5 | 00825241 |
| Single Drum Roller | BW 211 PD-5 | 00825269 |
| Single Drum Roller | BW 213 D-5 | 00825271 |
| Single Drum Roller | BW 213 PDH-5 | 00825275 |
| Single Drum Roller | BW 216 D-5 | 00825277 |
| Pneumatic Tyred Roller | BW 28 RH | 00826177 |
| Single Drum Roller | BW 214 D-5 | 00826359 |
| Single Drum Roller | BW 211 D-5 SL | 00826379 |
| Single Drum Roller | BW 213 D-5 SL | 00826383 |
| Single Drum Roller | BW 219-5 | 00826787 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
