The Bomag 05742584 O-Ring is a genuine OEM sealing component designed for a wide range of Bomag tandem rollers, single drum rollers, pneumatic tyred rollers, trench compactors, and pavers. As a factory-sourced part, this O-Ring is manufactured to the exact material and dimensional specifications required by Bomag, ensuring a proper seal in the hydraulic or fluid circuits where it is installed. Confirmed fitment includes the BW 100 SCC-5, BW 90 AD-5, BW 100 ADM-5, BW 145 DH-5, BW 177 D-5, BMP 8500, and BF 300 C-2 S340-2 TV, among other models. Sourcing the correct OEM O-Ring for part number 05742584 eliminates the guesswork that comes with imprecise replacements in critical sealing applications.
Key Features
- OEM-Grade Elastomer Material — Manufactured to Bomag's specified compound and hardness rating, delivering the correct compression set and chemical resistance for hydraulic and fluid system sealing.
- Drop-In Sealing Replacement — Machined to the exact cross-section and inner diameter required for the groove or port it seats in, allowing straightforward installation without reworking the mating surfaces.
- Broad Bomag Fleet Coverage — Fits multiple Bomag equipment classes including BW-series tandem rollers such as the BW 80 AD-5, BW 90 SC-5, and BW 100 ACM-5; single drum rollers including the BW 145 PDH-5 and BW 177 PDH-5; the BW 11 RH-5 pneumatic tyred roller; BMP 8500 trench compactors; and BF 300 and BF200C 2 pavers.
- Leak Prevention Where It Counts — A correctly seated O-Ring maintains system pressure and prevents fluid ingress or loss; a worn or out-of-spec seal leads to hydraulic leaks, contamination, and accelerated component wear throughout the circuit.
- Genuine Bomag Part — Sourced directly from Bomag's OEM supply chain, so the material spec, durometer, and geometry match the original design — not an approximation of it.
An O-Ring is a circular elastomeric seal fitted into a groove between two mating surfaces or around a port to prevent the passage of fluid or gas under pressure. In compaction and paving equipment like Bomag rollers and pavers, O-Rings are used throughout hydraulic circuits, pump housings, valve bodies, and fluid fittings to maintain pressure integrity and keep contaminants out. When an O-Ring degrades — through heat cycling, compression set, or chemical exposure — it loses its ability to conform to the sealing surfaces, resulting in leaks that reduce system efficiency and can lead to costly secondary damage if left unaddressed.
Part Details
| Part Number | 05742584 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tandem Roller | BW 100 SCC-5 | 00818505, 00824127, 00825295 |
| Tandem Roller | BW 80 AD-5 | 00818707, 00824117, 00825283 |
| Tandem Roller | BW 90 AD-5 | 00818709, 00824119, 00825285 |
| Tandem Roller | BW 100 ADM-5 | 00818711, 00824121, 00825289 |
| Tandem Roller | BW 90 SC-5 | 00818713, 00824125 |
| Tandem Roller | BW 100 SC-5 | 00818715, 00824129 |
| Tandem Roller | BW 100 ACM-5 | 00818717, 00824123, 00825291 |
| Trench Compactor | BMP 8500 | 00824277, 00825393, 00826969, 00827003 |
| Tandem Roller | BW 90 AC-5 | 00825287 |
| Paver | BF 300 C-2 S340-2 TV | 00825649 |
| Paver | BF 300 P-2 S340-2 TV | 00825651 |
| Paver | BF 300 C-2 S340-2 V | 00825653 |
| Pneumatic Tyred Roller | BW 11 RH-5 | 00825667 |
| Single Drum Roller | BW 145 DH-5 | 00825721 |
| Single Drum Roller | BW 145 PDH-5 | 00825723 |
| Single Drum Roller | BW 177 D-5 | 00825725 |
| Single Drum Roller | BW 177 DH-5 | 00825727 |
| Single Drum Roller | BW 177 PDH-5 | 00825729 |
| Single Drum Roller | BW 177-5 | 00825731 |
| Paver | BF200C 2 | 00825873 |
| Tandem Roller | BW 90 SL-5 | 00826551 |
| Tandem Roller | BW 90 SL-5 CC | 00826783 |
| Single Drum Roller | BW 145 D-5 PL | 00827061 |
| Single Drum Roller | BW 177 DH-5 PL | 00827077 |
| Single Drum Roller | BW 177 D-5 PL | 00827081 |
| Tandem Roller | BW 100 SLM-5 | 00827125 |
| Trench Compactor | BMP 8500 Kubota | 00827611 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
