The Bomag 06220208 O-Ring is a genuine OEM sealing component designed for a range of Bomag walk-behind light rollers, single drum rollers, tandem rollers, and trench compactors. Sourced directly from Bomag, this O-Ring matches the exact material compound, durometer, and dimensional tolerances specified for the original application. Confirmed fitment spans the BW 75 ADL, BW 124 D, BW 141 AD-2, BW 144 AD-2, BW 151 AC-2, BW 151 AD-2, BW 154 AD-2, and BW 850 T — keeping your compaction equipment sealed and operating as intended. When a sealing surface fails, replacing it with part number 06220208 ensures the correct cross-section and compound integrity are restored from the first installation.
Key Features
- Genuine OEM Compound Match — manufactured to Bomag's exact material and durometer specification, ensuring correct compression set behavior and long-term sealing in hydraulic or fluid-contact environments
- Exact Cross-Section and Diameter — this O-Ring seats into the original groove without shimming, trimming, or adapting, so installation is straightforward and the seal is immediate
- Broad Bomag Roller Coverage — fits BW 75 ADL walk-behind light rollers, BW 124 D single drum rollers, BW 141 AD-2, BW 144 AD-2, BW 151 AC-2, BW 151 AD-2, and BW 154 AD-2 tandem rollers, and BW 850 T trench compactors
- Leak Prevention from Day One — a properly seated O-Ring prevents fluid loss that would otherwise lead to pressure drop, contamination ingestion, or component damage in the sealed assembly
- Critical Sealing Application — in hydraulic and fluid systems, an incorrect or degraded O-Ring can allow pressurized fluid to bypass the seal, creating both an operational hazard and a source of progressive system damage
An O-Ring is a circular elastomeric seal that sits in a machined groove between two mating surfaces or around a shaft, creating a pressure-tight barrier that prevents fluid or air from escaping the assembly. In compaction equipment like Bomag rollers and trench compactors, O-Rings are used throughout hydraulic circuits, engine systems, and fluid reservoirs where any sealing failure results in leaks, pressure loss, or contamination. When an O-Ring ages, hardens, or is damaged during service, it loses its ability to conform to the mating surfaces — causing seeping or full leaks that escalate quickly if the correct replacement is not installed promptly.
Part Details
| Part Number | 06220208 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Walk-Behind / Light Roller | BW 75 ADL | 00810017 |
| Single Drum Roller | BW 124 D | 00810079 |
| Tandem Roller | BW 141 AD-2 | 00817474 |
| Tandem Roller | BW 144 AD-2 | 00817477, 00817478 |
| Tandem Roller | BW 151 AC-2 | 00817485 |
| Tandem Roller | BW 151 AD-2 | 00817486 |
| Tandem Roller | BW 154 AD-2 | 00817490, 00817491 |
| Tandem Roller | BW141AD 2 | 00817573 |
| Trench Compactor | BW 850 T | 00811652 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
