The Bomag 05717429 Plug is a genuine OEM component designed for a wide range of Bomag pavers, cold milling machines, recyclers/stabilizers, and refuse/landfill compactors. As a direct OEM replacement, this plug is manufactured to the same specifications as the original, ensuring a correct, trouble-free installation across all compatible equipment. This part fits the BF 600 and BF 691 paver series, the BM 2000/60 and BM 2000/60-2 cold milling machines, the MPH 122-2 and MPH 125 recyclers/stabilizers, and the BC 772 RB-2, BC 772 RS-2, BC 972 RB-2, and BC 1172 RB-2 refuse/landfill compactors. Sourcing genuine OEM means you get the right part the first time, with no guesswork on fitment or compatibility.
Key Features
- Genuine OEM Sealing Integrity — manufactured to original Bomag specifications, ensuring the plug seals ports and passages to the same pressure and fluid-retention standard as the factory-installed component
- Broad Cross-Family Fitment — fits BF 600 and BF 691 pavers, BM 2000/60 and BM 2000/60-2 cold milling machines, MPH 122-2 and MPH 125 recyclers/stabilizers, and BC 772 RB-2, BC 772 RS-2, BC 972 RB-2, and BC 1172 RB-2 refuse/landfill compactors
- Direct OEM Replacement — replaces the original plug under part number 05717429 with no adaptation needed; threads and dimensions match the original port geometry exactly
- Leak Prevention — a correctly installed plug keeps hydraulic, fuel, or fluid circuits fully sealed; a worn or damaged plug risks fluid loss, contamination, and unplanned stoppages across high-demand machine cycles
- Fluid System Reliability — maintaining proper port closure supports consistent system pressure and fluid cleanliness, which is critical on heavy-duty pavers, cold planers, and landfill compactors operating in harsh environments
A plug serves as a sealing closure for an open port, passage, or fitting within a machine's hydraulic, fuel, cooling, or lubrication system. Its job is to block fluid from escaping or contaminants from entering whenever a circuit is capped off, a service port is not in use, or a component has been removed. When a plug is cracked, stripped, or otherwise compromised, the affected system can lose pressure or fluid integrity, leading to leaks, contamination, and potential damage to surrounding components. Replacing a worn plug promptly with the correct OEM part keeps the system sealed and operating as intended.
Part Details
| Part Number | 05717429 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Plug |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Paver | BF 600 P HCE | 00800631, 00800721 |
| Paver | BF 600 C HCE | 00800633 |
| Paver | BF 600 C HCG | 00800635 |
| Paver | BF 600 C HSG | 00800637 |
| Paver | BF 600 C HSE | 00800639 |
| Paver | BF 600 P HCG | 00800641 |
| Paver | BF 600 P HSE | 00800645 |
| Paver | BF 600 C-E | 00800651 |
| Paver | BF 600 P-E | 00800653 |
| Paver | BF 600 C-G | 00800655 |
| Paver | BF 691 C | 00800661 |
| Paver | BF 691 C-HSE | 00800689 |
| Paver | BF 691 P-HSE | 00800691 |
| Cold Milling Machine | BM 2000/60-2 | 00800693, 00800695 |
| Paver | BF 691 C-HB | 00800703 |
| Paver | BF 691P-HSE | 00800705 |
| Paver | BF 600P HSE | 00800719, 00800727, 00824239 |
| Paver | BF 600C HCE | 00800725, 00800733 |
| Paver | BF 600P HCE | 00800729 |
| Paver | BF 600C HSE | 00800731 |
| Recycler / Stabilizer | MPH 122-2 | 00818177 |
| Refuse / Landfill Compactor | BC 772 RB-2 | 00818179 |
| Refuse / Landfill Compactor | BC 772 RS-2 | 00818185 |
| Refuse / Landfill Compactor | BC 972 RB-2 | 00818191 |
| Refuse / Landfill Compactor | BC 1172 RB-2 | 00818193 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818909 |
| Paver | BF 600 C-2 S 500 | 00824485, 00824489 |
| Paver | BF 600 C-2 S 600 | 00824487 |
| Paver | BF 700 C-2 S 600 | 00824491 |
| Paver | BF 700 C-2 S 500 | 00824493 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
