The Bomag 05556049 Pressure Filter is a genuine OEM pressure filter designed for Bomag BM-series cold milling machines and MPH- and RS-series recyclers/stabilizers, including the BM 500/15, BM 600/15, BM 1000/35, BM 1200/35, BM 1300/35, BM 2000/75, BM 2200/75, BM 2500/75, MPH 125, MPH 600, RS 460, RS 500, and RS 650. Sourced directly from Bomag, this filter carries the same part number 05556049 used in the factory build, so you can order with confidence that it will seat, seal, and perform exactly as the original. This pressure filter is the correct service replacement across multiple machine generations, including Stage V and T4f/T4i emission-spec variants listed in the fitment data.
Key Features
- Genuine OEM Hydraulic Filtration — manufactured to Bomag's exact filter media and bypass-valve specifications, maintaining the hydraulic cleanliness levels these high-powered milling and stabilizing systems demand.
- Drop-In Replacement — matches the OEM port sizing, thread pitch, and canister dimensions of the original, allowing a straightforward service swap without adapters or rework.
- Broad Machine Coverage — fits Bomag BM-series cold milling machines (BM 500/15 through BM 2500/75) and MPH/RS recyclers/stabilizers including the MPH 125, MPH 600, RS 460, RS 500, and RS 650, spanning standard, EU-Flex, Stage V, T4f, and T4i configurations.
- Protects Critical Hydraulic Components — a pressure filter in good condition traps particulate before it reaches pumps, motors, and control valves; a clogged or failed filter allows contamination that accelerates wear and can cause costly hydraulic system damage.
- Multi-Generation Compatibility — verified across first- and second-generation variants (e.g. BM 1000/35 and BM 1000/35-2, BM 500/15 and BM 500/15-2) so fleets running mixed model years can stock a single part number 05556049 for scheduled service intervals.
A pressure filter sits in the high-pressure side of the hydraulic circuit, capturing contaminants that are generated during normal operation before they can circulate through pumps, directional valves, and hydraulic motors. On cold milling machines and recyclers/stabilizers, these components work under sustained high loads, making clean hydraulic fluid essential to consistent cutter-drum torque and precise machine control. When this filter becomes saturated or bypasses, particulate-laden fluid accelerates internal wear across the entire hydraulic system, leading to erratic performance and premature component failure.
Part Details
| Part Number | 05556049 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Pressure Filter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873, 00824553 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Cold Milling Machine | BM 500 15 P8 | 00824743 |
| Cold Milling Machine | BM600 /15 | 00824745 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824753, 00824755 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Recycler / Stabilizer | RS 460 | 00824809, 00825187, 00825189 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Cold Milling Machine | BM 600/15 EU-Flex T4i | 00825065 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Recycler / Stabilizer | RS460 STAGE V | 00825263 |
| Cold Milling Machine | BM 2000/75 TE | 00825881 |
| Cold Milling Machine | BM 500/15 Stage V | 00825885 |
| Cold Milling Machine | BM 600/15 Stage V | 00825887 |
| Cold Milling Machine | BM 2500/75 | 00826375 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM 500/15-2 | 00826459 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Cold Milling Machine | BM 600/15-2 | 00826479 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
| Cold Milling Machine | BM1000/35-2 | 00826489 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
