The Bomag 05794336 Pressure Sensor is a genuine OEM component designed for a wide range of Bomag single drum rollers, tandem rollers, pavers, cold milling machines, and recycler/stabilizers. Sourced directly from Bomag, this pressure sensor delivers the exact electrical and pressure specifications required by the machine's control system. This sensor is confirmed to fit models including the BW 213 DH-5, BW 226 DH-5, BF 800 P S500, BM 1000/35, MPH 125, and RS 500, among many others across the BW, BF, BM, MPH, and RS families. Ordering by part number 05794336 ensures you receive the correct OEM sensor matched to your equipment.
Key Features
- OEM Electrical and Pressure Accuracy — Manufactured to Bomag's exact output specifications, ensuring the sensor delivers readings the machine's control system can correctly interpret — no signal drift or calibration mismatch.
- Drop-In Replacement — Uses the original connector and thread specification, allowing this sensor to install directly in the factory mounting location without rework or adapters.
- Broad Fitment Across Bomag Families — Compatible with BW-series single drum and tandem rollers, BF-series pavers, BM-series cold milling machines, and MPH and RS recycler/stabilizers, including models such as the BW 226 DH-4i, BF 600 P-2 S 500, BM 2500/75, MPH 600, and RS 650.
- Protects Hydraulic and Drive Systems — A correctly functioning pressure sensor allows the machine's control system to monitor operating pressure in real time, preventing over-pressure conditions that can damage pumps, motors, and hydraulic components.
- Genuine Bomag OEM Part — Supplied as an authentic Bomag replacement under part number 05794336, meeting the same material and tolerance standards as the original sensor fitted at the factory.
A pressure sensor monitors fluid or hydraulic pressure at a specific point in the machine's system and sends a corresponding electrical signal to the onboard control unit. This signal allows the control system to regulate pump output, trigger warnings, or protect components when pressure moves outside the acceptable operating range. When a pressure sensor fails or drifts out of calibration, the machine may display fault codes, operate erratically, or lose the ability to protect critical hydraulic or drive components from over-pressure damage — making prompt replacement essential to maintaining safe and accurate machine operation.
Part Details
| Part Number | 05794336 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Pressure Sensor |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Paver | BF 800 P S500 | 00800685, 00800687, 00800831, 00800879 |
| Paver | BF 600 P-2 S 500 | 00800795, 00800865, 00800911, 00825913 |
| Paver | BF 800 P S600-4i | 00800929, 00824219 |
| Paver | BF 600 P-2 S 600 | 00800949, 00825915 |
| Single Drum Roller | BW 226 DH-4i | 00818051, 00824227 |
| Single Drum Roller | BW 219 PDH-4 | 00818071, 00818859 |
| Single Drum Roller | BW 226 DH-4 | 00818073, 00818861, 00825077 |
| Single Drum Roller | BW 213 PDH-4 | 00818121, 00824145, 00824423 |
| Single Drum Roller | BW 213 DH-4 | 00818123, 00818125, 00818289, 00824039, 00824143 |
| Single Drum Roller | BW 216 DH-4 | 00818155, 00818849 |
| Single Drum Roller | BW 216 PDH-4 | 00818157 |
| Single Drum Roller | BW 219 DH-4 | 00818163, 00818857 |
| Tandem Roller | BW 154 AP-4 AM | 00818299, 00824177, 00824715 |
| Tandem Roller | BW 154 AP-4 | 00818301, 00824179, 00824717 |
| Tandem Roller | BW 154 ACP-4 AM | 00818303, 00824719 |
| Tandem Roller | BW 154 ACP-4 | 00818305, 00824721 |
| Single Drum Roller | BW 214 PDH-4 | 00818345 |
| Single Drum Roller | BW 177 DH-4 | 00818453, 00818543, 00824037, 00824133 |
| Single Drum Roller | BW 177 PDH-4 | 00818541 |
| Single Drum Roller | BW 179 DH-4 | 00818545, 00824137 |
| Tandem Roller | BW 174 AP-4 AM | 00818655, 00818845, 00824543 |
| Tandem Roller | BW 174 AP-4 | 00818657, 00818847, 00824545 |
| Recycler / Stabilizer | MPH 125 | 00818681, 00818909 |
| Single Drum Roller | BW 332 | 00818725 |
| Tandem Roller | BW 174 AP-4 AM PB | 00818971 |
| Tandem Roller | BW 174 AP-4 PB | 00818973 |
| Tandem Roller | BW 174 AP-4i AM | 00824093, 00824627, 00825051 |
| Tandem Roller | BW 174 AP-4i | 00824095, 00824629, 00825053 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Single Drum Roller | BW 179 PDH-4 | 00824139 |
| Single Drum Roller | BW 214 DH-4 | 00824147 |
| Paver | BF 800 P S500-4i | 00824217 |
| Single Drum Roller | BW 219 DH-4i | 00824221 |
| Single Drum Roller | BW 219 PDH-4i | 00824225 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Single Drum Roller | BW 177 D-5 | 00824351, 00824913, 00824915, 00825433, 00825725, 00825839 |
| Single Drum Roller | BW 145 D-5 | 00824357, 00825003, 00825427, 00825837, 00826053 |
| Tandem Roller | BW 154 AP-4i AM | 00824385 |
| Single Drum Roller | BW 213 DH-4 EU-Flex | 00824433 |
| Single Drum Roller | BW 213 DH-4i | 00824439, 00824445, 00824447, 00824673, 00824675 |
| Single Drum Roller | BW 213 PDH-4i | 00824455, 00824685 |
| Single Drum Roller | BW 214 DH-4i | 00824459 |
| Single Drum Roller | BW 216 DH-4i | 00824467, 00824695 |
| Single Drum Roller | BW 216 PDH-4i | 00824469 |
| Single Drum Roller | BW 145 DH-5 | 00824471, 00825721 |
| Single Drum Roller | BW 145 PDH-5 | 00824473, 00825723 |
| Single Drum Roller | BW 177 DH-5 | 00824475, 00824917, 00825435, 00825727 |
| Single Drum Roller | BW 177 PDH-5 | 00824477, 00825437, 00825729 |
| Single Drum Roller | BW 177BVC-5 | 00824479 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Single Drum Roller | BW 214 DH-4 EU Flex | 00824565 |
| Single Drum Roller | BW 211 DH-5 | 00824573 |
| Single Drum Roller | BW 213 DH-5 | 00824575, 00824863, 00825983 |
| Single Drum Roller | BW 213 | 00824577, 00825991 |
| Single Drum Roller | BW 219 DH-5 | 00824581, 00824875, 00825223, 00825701, 00825851 |
| Single Drum Roller | BW 226-5 | 00824583, 00824883, 00825717 |
| Tandem Roller | BW 154 AP-4i | 00824587 |
| Tandem Roller | BW 154 ACP-4i AM | 00824589, 00825383 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Single Drum Roller | BW 213 DH 4I | 00824677, 00824679 |
| Single Drum Roller | BW 211 PDH-5 | 00824725 |
| Single Drum Roller | BW 212 DH-5 | 00824727 |
| Single Drum Roller | BW213DH P-5 | 00824729, 00825989 |
| Single Drum Roller | BW 213 PDH-5 | 00824731, 00825275, 00825985 |
| Single Drum Roller | BW 213-5 | 00824733, 00824867, 00825987 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824753, 00824755 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Recycler / Stabilizer | RS 460 | 00824809, 00825187, 00825189 |
| Single Drum Roller | BW 226 DH-5 | 00824815, 00824881 |
| Single Drum Roller | BW 226 DI-5 | 00824817, 00824975, 00825711 |
| Single Drum Roller | BW 226 RC-5 | 00824819 |
| Single Drum Roller | BW 216 DH-5 | 00824825, 00825997 |
| Single Drum Roller | BW 216 PDH-5 | 00824827 |
| Single Drum Roller | BW 219-5 | 00824831 |
| Single Drum Roller | BW 219 PDH-5 | 00824849, 00824879, 00825705, 00825853 |
| Single Drum Roller | BW 226 PDH-5 | 00824851, 00825057, 00825229 |
| Tandem Roller | BW 174 AP-4f AM | 00824909 |
| Tandem Roller | BW 174 AP-4f | 00824911 |
| Single Drum Roller | BW 219 DH-4i EU-Flex | 00824967 |
| Single Drum Roller | BW 226 DH-4i EU-Flex | 00824969 |
| Single Drum Roller | BW 226 | 00824971 |
| Tandem Roller | BW 174 APO-4i | 00825099 |
| Tandem Roller | BW 174 ACP 4I AM | 00825103 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Recycler / Stabilizer | RS460 STAGE V | 00825263 |
| Single Drum Roller | BW 177-5 | 00825731 |
| Tandem Roller | BW 174 AP-4v AM | 00825819 |
| Cold Milling Machine | BM 2000/75 TE | 00825881 |
| Tandem Roller | BW 174 APO-4f | 00826149 |
| Paver | BF 600 P-3 S 500 | 00826343 |
| Cold Milling Machine | BM 2500/75 | 00826375 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
